| VI Server Property Information
|
| Property ID
|
4F483C2E
|
| Scope
|
Basic Development Environment
|
| Data Name
|
Alarming.Hi.Deadband
|
| Short Name*
|
Alarming.Hi.Deadband
|
| Long Name*
|
Alarming:Hi:Deadband
|
| * Displayed here in English. Short and Long names appear in the language of the LabVIEW IDE.
|
| Owning Class ID
|
81
|
| Owning Class Name
|
Variable Class
|
| Data Type
|
Double Float data type
|
| Property Node
|
|
| Available in Real-Time Operating System | No |
| Available in Run-Time Engine | No |
| Loads the block diagram into memory | No |
| Loads the front panel into memory | No |
| Need to authenticate before use | No |
| Permissions | Read/Write |
| Remote access allowed | Yes |
| Settable when the VI is running | Yes |
Gets or sets the HI alarm deadband as a percentage of the full scale range. To use this property, you must install the LabVIEW Datalogging and Supervisory Control Module.
A shared variable does not return to a normal state until it has left the alarm condition set by the value of the Alarming:Hi:Level property by at least the value of the deadband. If you set the deadband too high, the shared variable value might not clear the alarm.
| Note You can enable alarming only for network-published shared variables.
|
This property is similar to the Deadband/Time option on the Alarming page of the Shared Variable Properties dialog box.
Uses
History
| Version
|
Change(s)
|
|
More info to come.
|
See Also
External Links
