Jump to content

NI PXI Routing Matrix Error Code Family

From LabVIEW Wiki

Below are all of the Error Codes that belong to the NI PXI Routing Matrix Error Code Family (see Error List for list of Families).

Code Description
-1074101707 Version check error. The trigger routing topography on the FPGA is too old. Upgrade your firmware, or recompile your FPGA bitfile with a newer version of the trigger routing topography.
-1074101706 Version check error. The trigger routing topography on the FPGA is too new. Upgrade your software, or use a compatible FPGA bitfile.
-1074101705 The FPGA reported an unknown routing topography identifier, which is not supported by the driver.
-1074101704 Internal software error. The number of terminals specified in FPGA bitfile is not supported by the driver.
-1074101703 Device timed out while waiting for output enable to settle.
-1074101702 Internal software error. Requested address is outside PXI trigger routing address space.
-1074101701 Internal software error. Requested address is outside register port window.
-1074101700 Software for trigger routing is too old compared to the FPGA bitfile. Update driver.
-1074101699 Revision for trigger routing component(s) on the FPGA bitfile is too old. Update bitfile.
-1074101698 An invalid topography base address was found on FPGA bitfile.
-1074101697 FPGA bitfile loaded on device does not contain the necessary components for trigger routing.