NI Instruction Framework Error Code Family
Below are all of the Error Codes that belong to the NI Instruction Framework Error Code Family (see Error List for list of Families).
| Code | Description |
|---|---|
| -1074101888 | The register read command timed out. |
| -1074101887 | The register write command timed out. |
| -1074101886 | Bus instance exceeds the maximum number of bus instances. |
| -1074101885 | Failed to read subsystem map. Device does not have correct signature. This could be due to a problem with the instruction target. |
| -1074101884 | Failed to acquire subsystem map lock. The bus may be stalled. You may need to reset your target. |
| -1074101883 | Failed to look up the address space with the parameters specified. The corresponding address space might not be instantiated and connected to the instruction framework on the target. You may need to load a different bitfile on your FPGA target. |
| -1074101882 | Version check error. Address space version is too old. Upgrade your firmware, or recompile your FPGA bitfile with newer library versions. |
| -1074101881 | Version check error. Address space version is too new. Upgrade your software, or use a compatible bitfile. |
| -1074101880 | Invalid subsystem parameter. |
| -1074101879 | Invalid address parameter. |
| -1074101878 | An error occured when flattening address spaces. The address spaces may be too large to fit into one subsystem. |
| -1074101877 | Version check error. Insruction Framework FPGA library is too old. Upgrade your firmware, or recompile your FPGA bitfile with a newer version of the Instruction Framework. |
| -1074101876 | Version check error. Insruction Framework FPGA library is too new. Upgrade your software, or use a compatible bitfile. |
| -1074101875 | The Register Port FIFO has overflowed. Contact National Instruments. |
| -1074101874 | An FPGA subsystem returned an unknown non-negative error code. |
| -1074101873 | A timeout occurred while waiting for Register Port reset to complete. |
| -1074101872 | A timeout occurred while waiting for space in the Register Port input FIFO. |
| -1074101871 | An unexpected hardware failure occurred on the Instruction FIFO. |
| -1074101870 | A timeout occurred while waiting for space in the Instruction FIFO. |
| -1074101869 | A timeout occurred while waiting for a response from the Instruction FIFO. |
| -1074101868 | Failed to initialize the Instruction FIFO, due to an unexpected signature. |
| -1074101867 | Version check error. The Instruction FIFO FPGA library is outdated and is no longer supported by the software. Upgrade your firmware, or recompile your FPGA bitfile with newer source. |
| -1074101866 | Version check error. Your software is outdated and is no longer supported by the Instruction FIFO FPGA library. Upgrade your software, or use a compatible bitfile. |
| -1074101865 | An internal software error has occurred. The Instruction FIFO returned an unexpected read completion. Please contact technical support at http://ni.com/support. |
| -1074101864 | Version check error. Instruction framework plugin version is too old. |
| -1074101863 | Version check error. Instruction framework plugin version is too new. |