NI HSAI-RIO Cal Data Error Code Family
Below are all of the Error Codes that belong to the NI HSAI-RIO Cal Data Error Code Family (see Error List for list of Families).
| Code | Description |
|---|---|
| -1074101489 | TDC calibration data is invalid. Perform the self-calibration procedure. |
| -1074101488 | Phase calibration data is invalid. Perform the self-calibration procedure. |
| -1074101487 | Timebase calibration data is invalid. Perform the timebase adjustment external calibration procedure. |
| -1074101486 | DC calibration data is invalid. Perform the DC adjustment external calibration procedure. |
| -1074101485 | The specified channel configuration is not supported by the current set of calibration data. You may need to perform a full calibration. |
| -1074101484 | Interleaving offset correction data is invalid. Contact NI technical support or visit ni.com/support. |
| -1074101483 | 50 Ohm DC reference data is invalid. Perform the external calibration procedure. |
| -1074101482 | 1 MOhm DC reference data is invalid. Perform the external calibration procedure. |
| -1074101481 | 1 MOhm Compensation Attenuator data is invalid. Perform the external calibration procedure. |
| -1074101480 | DC calibration data is invalid. Perform the self-calibration procedure. |