MultiSegmentPipe class/Flange 1.Width property

From LabVIEW Wiki
Jump to: navigation, search
VI Server Property Information
Property ID 311C4C00
Scope Basic Development Environment
Data Name Flange1Width
Short Name* Flange1Width
Long Name* Flange 1:Width
* Displayed here in English. Short and Long names appear in the language of the LabVIEW IDE.
Owning Class ID 130
Owning Class Name MultiSegmentPipe Class
Data Type U32 data type

U32

Property Node Flange 1:Width
Available in Real-Time Operating SystemYes
Available in Run-Time EngineYes
Loads the block diagram into memoryNo
Loads the front panel into memoryNo
Need to authenticate before useNo
PermissionsRead/Write
Remote access allowedYes
Settable when the VI is runningYes

Gets or sets the width of the flange that appears on the left end of a pipe network when you first place the Multi-Segment Pipe control on the front panel window.

The flange width is the distance, in pixels, from the edge of the adjoining pipe segment to the edge of the flange. The maximum flange width is 500 pixels. The minimum flange width is one pixel. LabVIEW returns an error if you specify a value greater than the maximum or less than the minimum flange width.

The following illustration shows the flange width.

<img src="loc_eps_flange1_width.gif"> You also can set the flange width interactively.

Uses

History

Version Change(s)
LabVIEW 2018 More info to come.

See Also

External Links