LabVIEW WSN Error Code Family
Below are all of the Error Codes that belong to the LabVIEW WSN Error Code Family (see Error List for list of Families).
| Code | Description |
|---|---|
| -25399 | LabVIEW WSN: (Hex 0xFFFF9CC9) The last LV WSN Error. Turn back, padawan, there is no where else to go. |
| -25339 | LabVIEW WSN: (Hex 0xFFFF9D05) You must enable the serial port receiver power before calling this function, or no new data can be read. |
| -25338 | LabVIEW WSN: (Hex 0xFFFF9D06) The device does not support reading or writing the specified number of bytes from the serial port at one time. |
| -25337 | LabVIEW WSN: (Hex 0xFFFF9D07) The specified number of bytes cannot be read or written within the specified timeout. |
| -25336 | LabVIEW WSN: (Hex 0xFFFF9D08) The specified serial port configuration is unsupported on this device. |
| -25327 | LabVIEW WSN: (Hex 0xFFFF9D11) Not enough user RAM. |
| -25326 | LabVIEW WSN: (Hex 0xFFFF9D12) Invalid user RAM refnum. |
| -25325 | LabVIEW WSN: (Hex 0xFFFF9D13) Verification of user memory failed. |
| -25324 | LabVIEW WSN: (Hex 0xFFFF9D14) Failed to write to user memory. |
| -25323 | LabVIEW WSN: (Hex 0xFFFF9D15) Failed to write to user memory because the location is not empty. |
| -25322 | LabVIEW WSN: (Hex 0xFFFF9D16) User memory out of bounds. The operation specified a location outside the user memory sector. |
| -25321 | LabVIEW WSN: (Hex 0xFFFF9D17) Failed to erase the specified user memory sector. |
| -25320 | LabVIEW WSN: (Hex 0xFFFF9D18) Null pointer exception. |
| -25313 | LabVIEW WSN: (Hex 0xFFFF9D1F) Internal error: Hardware failure. |
| -25312 | LabVIEW WSN: (Hex 0xFFFF9D20) The node is not connected. |
| -25311 | LabVIEW WSN: (Hex 0xFFFF9D21) Invalid argument. |
| -25310 | LabVIEW WSN: (Hex 0xFFFF9D22) User message missed. |
| -25309 | LabVIEW WSN: (Hex 0xFFFF9D23) Radio failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support. |
| -25308 | LabVIEW WSN: (Hex 0xFFFF9D24) Flash failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support. |
| -25307 | LabVIEW WSN: (Hex 0xFFFF9D25) Command queue overflow: An internal error has occurred. Please contact National Instruments technical support at ni.com/support. |
| -25306 | LabVIEW WSN: (Hex 0xFFFF9D26) Digital output line failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support. |
| -25305 | LabVIEW WSN: (Hex 0xFFFF9D27) ADC failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support. |
| -25304 | LabVIEW WSN: (Hex 0xFFFF9D28) CJC failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support. |
| -25303 | LabVIEW WSN: (Hex 0xFFFF9D29) SPI communication failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support. |
| -25302 | LabVIEW WSN: (Hex 0xFFFF9D2A) Serial receiving failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support. |
| -25301 | LabVIEW WSN: (Hex 0xFFFF9D2B) Serial transmission failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support. |
| -25300 | LabVIEW WSN: (Hex 0xFFFF9D2C) An internal error has occurred in the LabVIEW Wireless Sensor Network Module. Please contact National Instruments technical support at ni.com/support. |
| -25283 | LabVIEW WSN: (Hex 0xFFFF9D3D) The node ID does not exist in the gateway's node table. |
| -25282 | LabVIEW WSN: (Hex 0xFFFF9D3E) Invalid message reference. |
| -25281 | LabVIEW WSN: (Hex 0xFFFF9D3F) Invalid node reference. |
| -25280 | LabVIEW WSN: (Hex 0xFFFF9D40) Invalid gateway reference. |
| -25254 | LabVIEW WSN: (Hex 0xFFFF9D5A) Connection timed out. Gateway might be in a bad state. |
| -25253 | LabVIEW WSN: (Hex 0xFFFF9D5B) Double interface registration: An internal error has occurred. Please contact National Instruments technical support at ni.com/support. |
| -25252 | LabVIEW WSN: (Hex 0xFFFF9D5C) Incompatible or corrupted data was received from the gateway. |
| -25251 | LabVIEW WSN: (Hex 0xFFFF9D5D) Memory error. Unable to deallocate used memory. |
| -25250 | LabVIEW WSN: (Hex 0xFFFF9D5E) Memory allocation failed. |
| -25230 | LabVIEW WSN: (Hex 0xFFFF9D72) The request processor failed to deserialize a request. This error can occur if protocol versions are incompatible or data is corrupt. |
| -25229 | LabVIEW WSN: (Hex 0xFFFF9D73) The request processor failed to deserialize a request. This error can occur if protocol versions are incompatible. |
| -25228 | LabVIEW WSN: (Hex 0xFFFF9D74) The request terminated due to an unhandled exception. |
| -25227 | LabVIEW WSN: (Hex 0xFFFF9D75) Memory allocation failed. |
| -25226 | LabVIEW WSN: (Hex 0xFFFF9D76) The client was denied access. |
| -25225 | LabVIEW WSN: (Hex 0xFFFF9D77) The client aborted the connection. |
| -25224 | LabVIEW WSN: (Hex 0xFFFF9D78) Network communication failed. |
| -25223 | LabVIEW WSN: (Hex 0xFFFF9D79) Connection timed out. |
| -25222 | LabVIEW WSN: (Hex 0xFFFF9D7A) Unable to connect to the named service. |
| -25221 | LabVIEW WSN: (Hex 0xFFFF9D7B) Unable to connect to the named gateway. |
| -25220 | LabVIEW WSN: (Hex 0xFFFF9D7C) Generic connection error. |
| -25200 | LabVIEW WSN: (Hex 0xFFFF9D90) First LV WSN Error |
| 21100 | LabVIEW WSN: (Hex 0x526C) First LV WSN Warning |
| 21240 | LabVIEW WSN: (Hex 0x52F8) The serial port receiver received a break condition on the line. |
| 21241 | LabVIEW WSN: (Hex 0x52F9) The specified number of bytes were read from the serial port before the specified termination string was detected. |
| 21299 | LabVIEW WSN: (Hex 0x5333) The last LV WSN Warning. |