Application class

<VI Server Class Hierarchy

The Application class is a class in the VI Server Class Hierarchy, (see also VI Server). The Application class is the top-level instance of the application in its context. Multiple application instances can be open at a time.

Legend
R/W	Readable/Writable {R = Read Only, W = Write Only, R/W = Read/Write}
RTE	Available in the Run-Time Engine
B	Basic Development Environment
S	VI Scripting
P	Private
B	Deprecated

Properties

Show/Hide Application Properties Table

Application Properties Table

Property ID	Data Name	Short Name	Long Name	Description	R/W	RTE	B	S	P	D
fa	AppBuilderCache.Path	AppBuilderCache.Path	AppBuilderCache:Path		R				X
80	App.ActiveApp	App.ActiveApp	Application:Active:Application	Gets an application reference to the active VIs owning application.	R	X		X
46	ActiveVI	App.ActiveVI	Application:Active:VI	Returns the name of the active VI in the application.	R	X		X
68	App.AllContexts	App.AllContexts	Application:All Contexts		R	X			X
cd	App.AllMyLibses	App.AllLibsInAppInstance	Application:All Libraries in Application Instance	Lists all Libraries currently in memory in this application instance.	R	X	X
1e	App.AllSysVIs	App.AllSysVIs	Application:All System VIs in Memory		R	X			X
1c	App.AllVIs	App.AllVIs	Application:All VIs In Memory	Returns a list of VIs in memory for the specified application instance. This property returns an error if you wire a remote application reference to the reference input. For a remote application, use the Exported VIs in Memory property to return a list of exported VIs. Note If you have multiple application instances open simultaneously, this property returns only the VIs in memory in the specified application instance. LabVIEW creates a new application instance each time you open a LabVIEW project or target for a LabVIEW project.	R	X	X
52	App.AssistantsUseStrictTypesDefault	App.AssistantsUseStrictTypesDefault	Application:Assistants Use Strict Types Default		R/W	X			X
53	Auto-route Wires	App.AutoRouteWires	Application:Auto-Route Wires	Returns whether LabVIEW automatically finds a route for a wire.	R/W			X
dd	App.AvailEnvModes	App.AvailEnvModes	Application:Available Environment Modes		R				X
e4	App.ClipMode	App.ClipMode	Application:Clipboard Mode		R/W	X		X	X
ad	App.ClipVI	App.ClipVI	Application:Clipboard VI		R/W	X		X	X
4f	App.Args	App.Args	Application:Command Line Arguments	Returns an array of user-defined command-line arguments passed when LabVIEW launched. User-defined arguments start after two hyphens (--) surrounded by spaces in the command line. The first string in the array is the name of the executable launched. This property does not return the name of the VI launched or the LLB that contains the VI. If a user-defined command-line argument contains double quotation marks ("), this property returns the argument without the quotation marks. If you use this property in a stand-alone application, you can avoid the need to enter two hyphens before user-defined arguments by placing a checkmark in the Pass all command line arguments to application checkbox on the Advanced page of the Application Properties dialog box.	R	X	X
fc	App.CompilerThreshold	App.CompilerThreshold	Application:Compiler Threshold	Gets or sets how complex a VI must be before the compiler limits optimizations to improve editor responsiveness. If the complexity of a VI is lower than the threshold indicated by this value, the compiler does not limit optimizations, thereby improving the execution speed of the VI. If the complexity of a VI is higher than the threshold, the compiler limits optimizations in order to improve editor responsiveness for the VI. To determine the complexity of a specific VI, refer to the Compiled Code Complexity value on the Memory Usage page of the VI Properties dialog box or use the Compiled:Code Complexity property. This property provides programmatic access to the Compiler optimizations slider on the Environment page of the Options dialog box. Possible Errors If you set this property to a value greater than 10, this property returns error 1.	R/W			X
101	App.Compiler.AutoInlining	App.Compiler.AutoInlining	Application:Compiler:AutoInlining		R/W	X			X
d9	App.Compiler.BriefDOT	App.Compiler.BriefDOT	Application:Compiler:BriefDOT		R/W	X			X
af	App.UseDFIR?	App.Compiler.DFIRCompiler	Application:Compiler:DFIR Compiler		R/W	X			X
c2	App.Compiler.DOT	App.Compiler.DOT	Application:Compiler:DOT		R/W	X			X
100	App.Compiler.FP Reg Candidate	App.Compiler.FP Reg Candidate	Application:Compiler:FP Register Candidate		R/W	X			X
ca	App.Compiler.LLVMCompiler	App.Compiler.LLVMCompiler	Application:Compiler:LLVM Compiler		R/W	X			X
e6	App.Compiler.SSE Runtime Optimization	App.Compiler.SSE Runtime Optimization	Application:Compiler:SSE Runtime Optimization		R/W	X			X
ea	App.Compiler.SSE1 Code Generation	App.Compiler.SSE1 Code Generation	Application:Compiler:SSE1 Code Generation		R/W	X			X
eb	App.Compiler.SSE2 Code Generation	App.Compiler.SSE2 Code Generation	Application:Compiler:SSE2 Code Generation		R/W	X			X
c1	App.Compiler.Sanity	App.Compiler.Sanity	Application:Compiler:Sanity		R/W	X			X
7a	App.ContextName	App.ContextName	Application:Context Name		R	X			X
2a	App.CtrlPalOpen	App.CtrlPalOpen	Application:Controls Palette Open		R/W				X
fe	CrossCompileCount	App.CrossCompileCount	Application:Cross Compile Count		R				X
8e	App.Cross Context Settings	App.CrossContextSettings	Application:Cross Context Settings		R				X
ef	App.GetCurrentEnvMode	App.CurrentEnvMode	Application:Current Environment Mode	Returns the current environment mode of LabVIEW, such as robotics. If you call this property from a VI in the LabVIEW development system environment, this property returns an empty string.	R/W	X	X
ba	App.IsLabVIEWDSC?	App.IsLabVIEWDSC?	Application:DSC Support		R	X			X
6a	DWarnDialog	App.DWarnDialog	Application:DWarn Dialog		R/W	X			X
8d	App.DebugName	App.DebugName	Application:Debug Name	Returns the name used for opening a debugging connection to this application or shared library. This method is only useful in built applications or shared libraries.	R	X	X
90	App.DefaultApplication	App.DefaultApplication	Application:Default:Application	Returns the default application reference.	R	X	X
8f	App.DefaultContextName	App.DefaultContextName	Application:Default:Context Name		R	X			X
57	App.DefaultDataLocation	App.DfltDataDir	Application:Default:Data Directory	Path to the default data directory. You can use this directory to store the data files LabVIEW generates, such as .lvm or .txt files. When you install LabVIEW, the installer creates a LabVIEW Data subdirectory in the default file directory for the operating system to help you organize and locate the data files LabVIEW generates. This property is similar to the Default Data Directory option on the Paths page of the Options dialog box.	R	X	X
4e	DefaultErrorHandlerVI	App.DefaultErrorHandlerVI	Application:Default:Error Handler VI		R/W	X			X
2d	App.DefFileDlgPth	App.DefFileDlgPth	Application:Default:File Dialog Path		R/W	X			X
56	App.DeferDrawing	App.DeferDrawing	Application:Defer Drawing		R/W	X			X
5b	App.DelFPTerm	App.DelFPTerm	Application:Delete FP Terminal from Diagram	Returns whether LabVIEW deletes terminals corresponding to front panel objects from diagram operations.	R/W			X
19	App.Dir	App.Dir	Application:Directory Path	Absolute path to the directory where the application is located.	R	X	X
e2	App.DisablePathCase	App.DisablePathCase	Application:Disable Path Case		R/W	X			X
3e	App.DownloadedVIs	App.DownloadedVIs	Application:Downloaded VIs		R				X
38	App.EmbExportedPath	App.EmbExportedPath	Application:Embedded Root Path		R	X			X
111	App.Enable Binary Compatibility Load	App.Enable Binary Compatibility Load	Application:Enable Binary Compatibility Load		R/W	X			X
106	App.Enable Inheritance LinkRef Addition	App.Enable Inheritance LinkRef Addition	Application:Enable Inheritance LinkRef Addition		R/W	X			X
107	App.Enable Inheritance LinkRefs	App.Enable Inheritance LinkRefs	Application:Enable Inheritance LinkRefs		R/W	X			X
112	App.EnableExcursionFreeExecSystems	App.EnableExcursionFreeExecSystems	Application:EnableExcursionFreeExecSystems		R/W	X			X
8	App.ExportedVIs	App.ExportedVIs	Application:Exported VIs In Memory	Returns a list of exported VIs in memory. This property is similar to the Exported VIs list option in the Exported VIs section on the VI Server page of the Options dialog box.	R	X	X
67	App.FullFeature	App.FullFeature	Application:Full Feature		R	X			X
2b	App.FuncPalOpen	App.FuncPalOpen	Application:Functions Palette Open		R/W				X
ff	App.GdiCount	App.GdiCount	Application:GdiCount		R				X
e1	App.HideLoadWarning	App.HideLoadWarning	Application:Hide Load Warning		R/W	X			X
3a	App.HostPrefsSec	App.HostPrefsSec	Application:Host Preferences Section		R	X			X
113	App.IgnoreUnresolvedDLLRef	App.IgnoreUnresolvedDLLRef	Application:IgnoreUnresolvedDLLRef		R	X			X
114	App.ImageTableCount	App.ImageTableCount	Application:ImageTableCount		R	X			X
110	App.ImageTableMaxCount	App.ImageTableMaxCount	Application:ImageTableMaxCount		R	X			X
f5	App.InstCachePath	App.InstCachePath	Application:InstCachePath		R	X			X
5f	App.InstalledPackage	App.InstalledPackage	Application:Installed Package		R	X			X
62	App.InternetToolkitInstalled	App.InternetToolkitInstalled	Application:Internet Toolkit Installed		R/W	X			X
da	App.RunTimeEngine	App.IsBuildAppInstance?	Application:Is Build App Instance		R/W				X
f6	App.IsCompileSuppressed	App.IsCompileSuppressed	Application:Is Compile Suppressed		R/W			X	X
7d	App.IsEditorMDI?	App.IsEditorMDI?	Application:Is Editor In MDI Mode		R	X			X
a6	AppMigrationEnabled	App.MigrationEnabled	Application:Is Migration Enabled		R/W				X
3	App.Kind	App.Kind	Application:Kind	Indicates the LabVIEW instance the VI is running in, including invalid application types.	R	X	X
83	App.LVTarget	App.LV Target	Application:LVTarget		R				X
63	App.Language	App.Language	Application:Language	Indicates the language of the LabVIEW environment or stand-alone application as a string according to ISO 639. Values include en, de, fr, ja, ko, and zh-cn.	R	X	X
dc	App.IsBuildAppCompatibilityMode?	App.Legacy Build App File Layout	Application:Legacy Build App File Layout		R	X			X
aa	App.RunWithXNode	App.RunWithXNode	Application:Let Private Context Run With XNode		R/W	X			X
f9	App.LibFinishPartialLoad	App.LibFinishPartialLoad	Application:Library Finish Partial Load Enabled		R/W	X			X
e3	App.LockInstantiationsForAppBuilder	App.LockInstantiationsForAppBuilder	Application:Lock Instantiations for AppBuilder		R/W			X	X
fd	LockedForBuild	App.LockedForBuild	Application:Locked Down For Build		R/W	X		X	X
f4	App.MassCompWarnOnReadOnlyVIs	App.MassCompWarnOnReadOnlyVIs	Application:Mass Compile Warn On Read Only VIs		R/W				X
7f	App.MenuLaunchApp	App.MenuLaunchApp	Application:Menu Launch:App	Returns a reference to the application instance that launched the calling VI from a menu selection. If the calling VI was not launched from a menu selection, this property returns an error.	R	X		X
1d	App.MenuLaunchVI	App.MenuLaunchVI	Application:Menu Launch:VI	Returns the name of the VI that launched the calling VI from a menu selection. If the calling VI was not launched from a menu selection, this property returns an error.	R	X		X
a4	MultiPwdOpCancelled?	App.MultiPwdOpCancelled?	Application:Multi Pwd Op Cancelled?		R			X	X
0	App.Name	App.Name	Application:Name	Filename of the application. This property is similar to the Target filename option on the Information page of the Application Properties dialog box.	R	X	X
118	NativeEventTracingEnabled	App.NativeEventTracingEnabled	Application:NativeEventTracingEnabled		R/W	X			X
97	App.OnLine	App.OnLine	Application:On Line		R/W	X			X
115	App.PPL LoadInCompatible LVVersion Default Value	App.PPL LoadInCompatible LVVersion Default Value	Application:PPL LoadInCompatible LVVersion Default Value		R/W	X			X
36	App.ParentWindowForDialogs	App.ParWindForDlgs	Application:Parent Window For Dialogs		R/W	X			X
39	App.PrefsFilePth	App.PrefsFilePth	Application:Preferences File Path		R	X			X
84	App.Private?	App.Private?	Application:Private?		R	X			X
be	PropMethInfoDataTypes	App.PropMethDataTypes	Application:Property and Method Data Types		R				X
66	PumpOSMessages	App.PumpOSMessages	Application:Pump OS Messages		R/W	X			X
59	App.IsLabVIEWRT	App.IsLabVIEWRT?	Application:Real-Time Support		R	X			X
3c	App.RegOrg	App.RegOrg	Application:Registered Organization		R	X			X
3b	App.RegOwner	App.RegOwner	Application:Registered Owner		R	X			X
45	App.RemoteWebServerActive	App.RemoteWebServerActive	Application:Remote Web Server Active		R	X			X
ed	App.RenameVariablesForAppBuilder	App.RenameVariablesForAppBuilder	Application:Rename Variables for AppBuilder		R/W				X
89	AppSaveFormat	App.SaveFormat	Application:Save Format		R/W	X			X
de	App.Save Version	App.SaveVersion	Application:Save Version	Returns the version number of the LabVIEW file format to which LabVIEW documents are saved. This version number might be different from the version number of the application. For example, LabVIEW with the version number 9.0.1 saves LabVIEW documents with a file format version number of 9.0.	R	X	X
df	App.SaveVerLVFmt	App.SaveVerLVFmt	Application:Save Version As Integer		R	X			X
117	SaveChangesAutoSelection	App.SaveChangesAutoSelection	Application:SaveChangesAutoSelection		R/W			X	X
b9	App.SaveVersions	App.SaveVersions	Application:Saveable Versions	An array of the LabVIEW versions to which this version of LabVIEW can save. The array is in reverse chronological order, with the zeroth element being the current version of LabVIEW. Each element of the array is a valid version to pass to VI server functions which save to previous versions.	R		X
58	App.SearchPaths	App.SearchPaths	Application:Search Paths		R/W	X			X
47	App.SelListChanged	App.SelListChanged	Application:Selection List Changed		R	X		X	X
103	App.Selective Deallocation	App.Selective Deallocation	Application:Selective Deallocation		R/W	X			X
104	App.Selective Deallocation.EnableForAllVIs	App.Selective Deallocation.EnableForAllVIs	Application:Selective Deallocation:EnableForAllVIs		R/W	X			X
105	App.Selective Deallocation.LargeBufferThreshold	App.Selective Deallocation.LargeBufferThreshold	Application:Selective Deallocation:LargeBufferThreshold		R/W	X			X
3d	App.SerialNo	App.SerialNo	Application:Serial Number		R	X			X
3f	App.ShowFPTipStrips	App.ShowFPTipStrips	Application:Show FP Tip Strips	Writing the property: Setting this property to TRUE enables the display of tip strips on front panel controls. Setting the property to FALSE prevents them from being displayed. Reading the property: Specifies whether tip strips display when idling over controls on the front panel. This property is similar to the Show tip strips on front panel controls option on the Front Panel page of the Options dialog box.	R/W	X	X
102	App.ShowAutoErrDialog	App.ShowAutoErrDialog	Application:ShowAutoErrDialog		R/W	X			X
5	App.TargetCPU	App.TargetCPU	Application:Target:CPU	Indicates the target CPU of an application.	R	X	X
8b	App.TargetClassName	App.TargetClassName	Application:Target:Class Name		R	X			X
d2	App.TargetCurrProcID	App.TargetCurrProcID	Application:Target:Current Processor ID		R	X			X
d3	App.TargetCacheEntrySizes	App.TargetCacheEntrySizes	Application:Target:Data Cache Entry Sizes	Returns an array of the entry sizes, in bytes, for all cache levels the computer or target contains. Use this property to obtain information from a LabVIEW application running on a remote computer or target about the system on which the application runs. LabVIEW returns 0 if you use this property with a target for which the information is not available.	R	X	X
d4	App.TargetCacheSizes	App.TargetCacheSizes	Application:Target:Data Cache Sizes	Returns an array of the cache sizes, in bytes, for each cache level the computer or target contains. Use this property to obtain information from a LabVIEW application running on a remote computer or target about the system on which the application runs. LabVIEW returns 0 if you use this property with a target for which the information is not available.	R	X	X
44	App.TargetIP	App.TargetIP	Application:Target:IP Address		R	X			X
54	App.TargetInfo	App.TargetInfo	Application:Target:Info		R	X			X
d0	App.TargetCoresPerPackage	App.TargetCoresPerPackage	Application:Target:Number of Cores per Package	Returns the number of cores per package the computer or target contains. Use this property to obtain information from a LabVIEW application running on a remote computer or target about the system on which the application runs. LabVIEW returns 1 if you use this property with a target for which the information is not available.	R	X	X
ce	App.TargetNumProcs	App.TargetNumProcs	Application:Target:Number of Logical Processors	Returns the number of processing units the computer or target contains. This property returns the total number of logical processors, which might be different from the number currently available to LabVIEW. For example, the property includes disabled processors in the number of logical processors it returns. Use this property to obtain information from a LabVIEW application running on a remote computer or target about the system on which the application runs. LabVIEW returns 1 if you use this property with a target for which the information is not available.	R	X	X
d1	App.TargetLogProcsPerCore	App.TargetLogProcsPerCore	Application:Target:Number of Logical Processors per Core	Returns the number of logical processors per core the computer or target contains. Use this property to obtain information from a LabVIEW application running on a remote computer or target about the system on which the application runs. LabVIEW returns 1 if you use this property with a target for which the information is not available.	R	X	X
d5	App.TargetNumPackages	App.TargetNumPackages	Application:Target:Number of Packages	Returns the number of packages, or chips, the computer or target contains. Use this property to obtain information from a LabVIEW application running on a remote computer or target about the system on which the application runs. LabVIEW returns 1 if you use this property with a target for which the information is not available.	R	X	X
4	App.TargetOS	App.TargetOS	Application:Target:Operating System	Indicates the operating system for which the application was built. Mac OS refers to Mac OS versions 9 and 8. Carbon refers to Mac OS X (32-bit). The LabVIEW Real-Time Module always returns Phar Lap or VxWorks.	R	X	X
db	TSOptions	App.TSOptions	Application:TestStandOptions		R/W	X			X
2c	App.ToolPalOpen	App.ToolPalOpen	Application:Tools Palette Open		R/W				X
116	App.Treat LV 2016 As Binary Compatible	App.Treat LV 2016 As Binary Compatible	Application:Treat LV 2016 As Binary Compatible		R/W	X			X
ec	App.UD Refnum Files	App.UDRefnumFiles	Application:UD Refnum Files		R				X
4d	App.UnattendedMode	App.UnattendedMode	Application:Unattended Mode		R/W	X			X
51	UseAppTemplateBrowser	App.UseAppTemplateBrowser	Application:Use App Template Browser		R/W	X			X
5a	App.RTHostConnected	App.UserInterfaceAvailable	Application:User Interface Available	If you are not targeted to a real-time (RT) platform, this property is always TRUE. If you are targeted to an RT-platform and the host is connected, this property is TRUE. When this property is FALSE, the host is not connected, requiring that the Real-Time Module application must be able to handle all operations independent of the host. Use this property to determine when it is safe to display a dialog box that requires user interaction.	R	X	X
1	App.UserName	App.UserName	Application:User Name	User name used to open the application.	R/W	X	X
9e	TopBD	App.VIOfTopBD	Application:VI Of Top Most Block Diagram	Returns a reference to the block diagram highest in the Z order, which is most likely the last block diagram accessed.	R	X		X
37	App.VerLVFmt	App.VerLVFmt	Application:Version As Integer		R	X			X
2	App.Version	App.Version	Application:Version Number	Version number of the application. In a stand-alone application or shared library, this property returns the version of the LabVIEW Run-Time Engine.	R	X	X
d7	App.VersionYear	App.VersionYear	Application:Version Year	Version year of the application. In a stand-alone application or shared library, this property returns the version year of the LabVIEW Run-Time Engine.	R	X	X
109	App.VersionYearNumberOnly	App.VersionYearNumberOnly	Application:Version Year Number Only		R	X			X
64	App.WindForPanelOrigin	App.WindForPanelOrigin	Application:Window For Panel Origin		R/W	X			X
96	App.ZCompressLevel	App.ZCompressLevel	Application:Z Compress Level		R/W	X			X
a7	ForceEnableCrossLinkDlgs	ForceEnableCrossLinkDlgs	Crosslink:Force Enable Dialogs		R/W	X			X
a8	Suppress Crosslink Dlgs	SuppressCrosslinkDlgs	Crosslink:Suppress Dialogs		R/W	X			X
98	DbgSrvr.Active	DbgSrvr.Active	Debug Server:Server Active	Determines whether the Debug Server is enabled. You can use this property only in LabVIEW-built applications or shared libraries.	R/W	X	X
99	DbgSrvr.TCPAccess	DbgSrvr.TCPAccess	Debug Server:TCP/IP Access List	List that describes which TCP/IP addresses of remote clients can access the Debug Server. You can use this property only in LabVIEW-built applications or shared libraries.	R/W	X	X
a2	Delay File Notifications	Delay File Notifications	Delay File Notifications		R/W	X			X
22	Disp.AllMonitors	Disp.AllMonitors	Display:All Monitors	Returns information about all the monitors on the computer, including their bit depths and bounding rectangles. Elements: Name Description Bounds: Cluster that defines the bounding rectangle of the content area of all the monitors on the computer. Left—The horizontal coordinate of the left edge of the bounding rectangle. Top—The vertical coordinate of the top edge of the bounding rectangle. Right—The horizontal coordinate of the right edge of the bounding rectangle. Bottom—The vertical coordinate of the bottom edge of the bounding rectangle. Depth: The bit depth of all the monitors on the computer.	R	X	X
21	Disp.WkSpace	Disp.WkSpace	Display:Primary Workspace	Gives the bounding rectangle of the computer's primary monitor. Elements: Name Description Left: The horizontal coordinate of the left edge of the bounding rectangle of the computer's primary monitor. Top: The vertical coordinate of the top edge of the bounding rectangle of the computer's primary monitor. Right: The horizontal coordinate of the right edge of the bounding rectangle of the computer's primary monitor. Bottom: The vertical coordinate of the bottom edge of the bounding rectangle of the computer's primary monitor.	R	X	X
e0	GetNXTContext	GetNXTContext	Get NXT Context		R				X
bb	App.LoadSaveWarnTestMode	LoadSaveWarnings.AutoTestMode	Load and Save Warnings:Auto Test Mode		R/W				X
bc	LoadSaveWarnings.History	LoadSaveWarnings.History	Load and Save Warnings:History		R				X
a5	MathScript.AllMInCxt	MathScript.AllMInCxt	MathScript:All M Files In Context		R				X
f1	MathScript.ColorsInSync	MathScript.ColorsInSync	MathScript:ColorsInSync		R/W				X
e8	MathScript.Signature	MathScript.Signature	MathScript:Compiler Signature		R				X
f2	MathScript.CompilerInMemory	MathScript.CompilerInMemory	MathScript:CompilerInMemory		R				X
f0	MathScript.Colors	MathScript.Colors	MathScript:HighlightingColors		R				X
a3	MathScript.Path	MathScript.Path	MathScript:Path		R	X			X
65	ModHandle	ModHandle	Module Handle		R	X			X
a0	NISec.Nobody?	NISec.Nobody?	NI Security:Nobody Logged In?	Determines if anyone is logged in.	R	X	X
a1	NI Sec.Unique User	NI Sec.UniqueUser	NI Security:Unique User		R	X			X
7c	App.CurrentUserCredential	NISec.User	NI Security:User	Indicates the name of the user who is currently logged in, using the format of \.	R	X	X
bf	OS.BuildNumber	OS.BuildNumber	Operating System:Build Number	Build number of the actual operating system. This string returns an alphanumeric value of the build number that you can use to compare the build version of operating systems. This property is read only. Note A newer version of an operating system often returns a larger alphanumeric value.	R	X	X
c6	OS.DetailedName	OS.DetailedName	Operating System:Detailed Name	Detailed name of the operating system where the application is actually running. This string value returns the operating system and its version, such as Microsoft Windows XP. This property is similar to a combination of OSName and OSVersion, which return the platform name and a numeric version number respectively. This property is read only.	R	X	X
6	OS.Name	OS.Name	Operating System:Name	Name of the operating system where the application is actually running. Refer to the following for a partial list of operating systems this property might return: Linux Mac OS Mac OS X x64 PharLap RTX Solaris VxWorks Windows NT	R	X	X
7	OS.Version	OS.Version	Operating System:Version Number	Version number of the actual operating system.	R	X	X
8c	Options.MenuShortcuts	Options.EditorMenuBar	Options:Editor Menu Bar		R				X
6b	Options.UseAbridgedMenus	Options.UseAbridgedMenus	Options:Use Abridged Menus		R/W				X
b2	Palettes.GetCtrlNames	Palettes.GetCtrlNames	Palettes:Get Controls Names		R			X	X
b1	Palettes.GetFuncNames	Palettes.GetFuncNames	Palettes:Get Functions Names		R			X	X
4b	Pr.printers	Pr.Printers	Printing:Available Printers	Returns an alphabetized array of printer names available on the computer. Note This property is available only on Windows. This property is similar to the System Configured Printers output of the Query Available Printers VI.	R	X	X
48	Pr.Color	Pr.Color/Grayscale?	Printing:Color/Grayscale?		R/W	X	X
29	Pr.CustAllCtls?	Pr.CustAllCtls?	Printing:Custom All Controls?	Specifies whether to print all controls or only the controls wired to the connector pane when using the custom format with one of the print documentation VI methods. This property does not affect the image of the front panel, just the list of controls and indicators in the generated documentation. This property is similar to the All controls and Connected controls options on the VI Documentation page of the Print dialog box.	R/W		X
e7	Pr.CustClustConsts?	Pr.CustClustConsts?	Printing:Custom Cluster Constants?	Specifies whether to print the hidden contents of iconified cluster constants that might be present on the block diagram when using the custom format with one of the print documentation VI methods. This property is similar to the Iconified Cluster Constants option on the VI Documentation page of the Print dialog box.	R/W		X
c	Pr.CustConn?	Pr.CustConn?	Printing:Custom Connector?	Specifies whether to print the connector pane and icon of VIs when using the custom format with one of the print documentation VI methods. This property is similar to the Icon and connector pane option on the VI Documentation page of the Print dialog box.	R/W		X
11	Pr.CustCtlDesc?	Pr.CustCtlDesc?	Printing:Custom Control Descriptions?	Specifies whether to print descriptions of front panel controls when using the custom format with one of the print documentation VI methods. This property is similar to the Descriptions option on the VI Documentation page of the Print dialog box.	R/W		X
93	App.LabelCap?	Pr.CustLabelCap	Printing:Custom Control Label/Caption?	Specifies whether to print the label and/or caption for each control when using the custom format with one of the print documentation VI methods.	R/W		X
12	Pr.CustCtlType?	Pr.CustCtlType?	Printing:Custom Control Types?	Specifies whether to print data type information for front panel controls when using the custom format with one of the print documentation VI methods. This property is similar to the Data type information option on the VI Documentation page of the Print dialog box.	R/W		X
10	Pr.CustCtl?	Pr.CustCtl?	Printing:Custom Controls?	Specifies whether to print front panel control information when using the custom format with one of the print documentation VI methods. This property does not affect the image of the front panel, just the list of controls and indicators in the generated documentation. This property is similar to the Controls checkbox on the VI Documentation page of the Print dialog box.	R/W		X
d	Pr.CustDesc?	Pr.CustDesc?	Printing:Custom Description?	Specifies whether to print VI descriptions when using the custom format with one of the print documentation VI methods. This property is similar to the Description option on the VI Documentation page of the Print dialog box.	R/W		X
14	Pr.CustDiagHidden?	Pr.CustDiagHidden?	Printing:Custom Diagram Hidden?	Specifies whether to print the hidden frames in Case and Stacked Sequence structures that might be present on the block diagram when using the custom format with one of the print documentation VI methods. This property is similar to the Hidden frames option on the VI Documentation page of the Print dialog box.	R/W		X
15	Pr.CustDiagRepeat?	Pr.CustDiagRepeat?	Printing:Custom Diagram Repeat?	Specifies whether to print visible subdiagrams of each Case, Event, and Stacked Sequence structure in sequence with the non-visible subdiagrams when using the custom format with one of the print documentation VI methods. If you print the visible subdiagrams in sequence, those subdiagrams print twice. This property is similar to the Ordered (Repeat from higher level if nested) option on the VI Documentation page of the Print dialog box.	R/W		X
13	Pr.CustDiag?	Pr.CustDiag?	Printing:Custom Diagram?	Specifies whether to print block diagrams when using the custom format with one of the print documentation VI methods. This property is similar to the Block diagram option on the VI Documentation page of the Print dialog box.	R/W		X
5c	Pr.CustBlockConfig?	Pr.CustExpressVIConfig?	Printing:Custom Express VI Configuration?	Specifies whether to print the configuration information for any Express VIs on the block diagram when using the custom format with one of the print documentation VI methods. This property is similar to the Express VI configuration information checkbox on the VI Documentation page of the Print dialog box.	R/W		X
17	Pr.CustHier?	Pr.CustHier?	Printing:Custom Hierarchy?	Specifies whether to print the hierarchy of the VI in memory when using the custom format with one of the print documentation VI methods. This property is similar to the VI hierarchy option on the VI Documentation page of the Print dialog box.	R/W		X
18	Pr.CustHist?	Pr.CustHist?	Printing:Custom History?	Specifies whether to print the VI revision history information when using the custom format with one of the print documentation VI methods. This property is similar to the VI revision history option on the VI Documentation page of the Print dialog box.	R/W		X
16	Pr.CustSubVIs?	Pr.CustSubVIs?	Printing:Custom List of SubVIs?	Specifies whether to print a list of the subVIs and Express VIs including the icon, name, and path when using the custom format with one of the print documentation VI methods. If a polymorphic VI is a subVI, LabVIEW prints the instance used in the top-level VI including the icon, name, and path. If the top-level VI is polymorphic, LabVIEW prints a list of all the instances of the polymorphic VI including the icon, name, and path of each instance. This property is similar to the List of subVIs and Express VIs option on the VI Documentation page of the Print dialog box.	R/W		X
f	Pr.CustPanelBrdr?	Pr.CustPanelBrdr?	Printing:Custom Panel Border?	Specifies whether to print the front panel with a border when using the custom format with one of the print documentation VI methods. This property is similar to the Surround front panel with border option on the Print Options page of the VI Properties dialog box and the Surround panel with border option on the Printer page of the Print dialog box.	R/W		X
e	Pr.CustPanel?	Pr.CustPanel?	Printing:Custom Panel?	Specifies whether to print the front panel when using the custom format with one of the print documentation VI methods. This property is similar to the Front panel option on the VI Documentation page of the Print dialog box.	R/W		X
49	Pr.DefaultPrinter	Pr.DefaultPrinter	Printing:Default Printer	Gets or sets the name of the default printer in LabVIEW. To set the default printer, enter the full path to the printer, such as \\myprinter\ab01. Note This property is available only on Windows. This property is similar to the Default Printer output of the Query Available Printers VI.	R/W	X	X
9	Pr.FileWrapText	Pr.FileWrapText	Printing:File Wrap Text Length	Maximum number of characters on a single line in a file. Affects the Print:VI To HTML, Print:VI To RTF, and Print:VI To Text methods. Set this property to 0 to print all the characters on one line so the text does not wrap.	R/W		X
b	Pr.JPEGQuality	Pr.JPEGQuality	Printing:JPEG Quality	Percentage value from 0 to 100 specifying the level of quality you want for the JPEG graphic in VIs printed either interactively or with the Print:VI To HTML method. The scale balances image quality and file size. A value in the 75 to 95 range produces a compressed file with a high-quality image, and a value below 50 produces a smaller file size with a low-quality image. The default is 80.	R/W		X
4a	Pr.PrintMethod	Pr.Method	Printing:Method	Gets or sets how LabVIEW prints. This property is similar to the Standard printing, PostScript printing, and Bitmap printing options on the Printing page of the Options dialog box.	R/W	X	X
a	Pr.PNGCmpLvl	Pr.PNGCmpLvl	Printing:PNG Compression Level	Number between 0 and 9 that specifies the level of compression you want for the PNG file for graphics in VIs printed either interactively or with the Print:VI To HTML method. The quality of the graphic is not affected by the compression, but the graphic file size and speed of compression are affected by this value. Valid values range from 0 to 9 and balance file compression with speed. 0 designates no compression. 1 designates less compression, but faster speed. 9 designates high compression, but slower speed. If you enter –1, LabVIEW selects the best combination of speed and compression.	R/W		X
92	Project.ActiveProject	Project.ActiveProject	Project:Active Project	Returns a reference to the LabVIEW project that is active when this property executes. A project is active if the user has the associated project window in focus or any member of the project in focus, including VIs, controls, and project libraries.	R			X
81	DefaultProject	Project.DefaultProject	Project:Default Project		R				X
87	GetLastMaxLoadTime	Project.GetLastMaxLoadTime	Project:Get Last Max Load Time		R	X			X
82	Project.HasAnyProjectBeenCreated	Project.HasAnyProjBeenCreated	Project:Has Any Project Been Created		R	X			X
88	Project.Libraries[]	Project.Libraries[]	Project:Libraries[]		R				X
7e	Project.OwningProject	Project.OwningProject	Project:Owning Project	Returns a reference to the project that owns the referenced application.	R			X
69	Project	Project.Projects[]	Project:Projects[]	Returns an array of references to each LabVIEW project in memory. You can use these references with the Project properties.	R	X	X
85	ShowPathInProjectWindow	ShowPathInProjectWindow	Project:Show Path in Project Window		R/W	X			X
86	Project.TargetItem	Project.TargetItem	Project:Target Item	Returns the associated target item of the application reference you specify.	R	X	X
41	RemotePanel.ConnToClients	RemotePanel.ConnToClients	Remote Panel:Connections To Clients	Returns an array of clusters containing connection information about the clients currently connected to the computer. LabVIEW opens a connection on the server computer when another application instance or a related application, such as a Web browser, requests to view the front panel of a VI in memory on the server computer. This property is similar to the Total Network Traffic option on the Remote Panel Connection Manager dialog box. Elements: Name Description VI Name: Name of the VI on the server to which you want to connect. To specify a VI that is part of a LabVIEW project, you must include the project name, the project library, and the target in the path of the VI, when applicable. For example, if MyVI.vi resides in a project called MyProject.lvproj under target My Computer, enter the VI name as MyProject.lvproj/My Computer/MyVI.vi. If the VI resides in a project library called MyLibrary, also include the project library in the path, as in MyProject.lvproj/My Computer/MyLibrary.lvlib:MyVI.vi. If the VI is not in a project or project library, you can enter the VI name without any additional information. Remote: IP address of the client. UserName: LabVIEW user name of the client connected to the server computer. Port: Port number currently being used by the client computer. Status: An enumeration type that specifies the controlling status of the connection. Create Time: A time stamp that specifies in seconds when the connection was created. Status Time: A time stamp that specifies in seconds when the client changed to its current connection status. Control End Time: A time stamp that indicates when the server will regain control of the VI or transfer control to another client. A value of MM/DD/YY indicates that you did not set a time limit for the VI in the Web Server page of the Options dialog box.	R	X	X
42	RemotePanel.ConnToServers	RemotePanel.ConnToServers	Remote Panel:Connections To Servers	Returns an array of clusters containing connection information about the servers to which the computer is currently connected. Elements: Name Description VI Name: Name of the VI on the server to which you want to connect. To specify a VI that is part of a LabVIEW project, you must include the project name, the project library, and the target in the path of the VI, when applicable. For example, if MyVI.vi resides in a project called MyProject.lvproj under target My Computer, enter the VI name as MyProject.lvproj/My Computer/MyVI.vi. If the VI resides in a project library called MyLibrary, also include the project library in the path, as in MyProject.lvproj/My Computer/MyLibrary.lvlib:MyVI.vi. If the VI is not in a project or project library, you can enter the VI name without any additional information. Remote: IP address of the server to which you are connected. UserName: Your current LabVIEW user name. Port: Port number currently being used by the server computer. Status: An enumeration type that specifies the controlling status of the connection. Create Time: A time stamp that specifies in seconds when the connection was created. Status Time: A time stamp that specifies in seconds when the server changed to its current connection status. Control End Time: A time stamp that indicates when the server will regain control of the VI or transfer control to another client. A value of MM/DD/YY indicates that the server administrator did not set a time limit for the VI in the Web Server page of the Options dialog box. Use the Remote Panel:Open Connection To Server method to open a connection to a server.	R	X	X
5e	RemotePanel.IsSupported	RemotePanel.IsSupported	Remote Panel:Is Supported		R	X			X
43	RemotePanel.NetLoadMonitorEnabled	RemotePanel.NetLoadMonitor	Remote Panel:NetLoad Monitor Enabled		R/W	X			X
9f	Run Reserve XI	RunReserveXIface	Run Reserve XInterface Components		R/W	X			X
9d	SFPApp	SFP.App	Save for Previous:Original App		R	X			X
fb	SeparateCompCodeForNewVIs	SeparateCompCodeForNewFiles	Separate Compiled Code For New Files		R				X
27	Srvr.LogEnabled	Srvr.LogEnabled	Server:Logging Enabled	Specifies whether the TCP interface to the VI Server is logging operations to a file. If you do not wire the Property Node reference input, LabVIEW uses the application instance for the calling VI.	R/W	X	X
28	Srvr.LogPath	Srvr.LogPath	Server:Logging File Path	Path of the log file created during TCP/IP communication. If you do not wire the Property Node reference input, LabVIEW uses the application instance for the calling VI.	R/W	X	X
5d	Srvr.Port	Srvr.Port	Server:Port	Gets or sets the LabVIEW VI server port. LabVIEW returns an error if you attempt to access this property on a remote application. If you do not wire the Property Node reference input, LabVIEW uses the application instance for the calling VI. This property is similar to the Port option in the Protocols section on the VI Server page on the Options dialog box.	R/W	X	X
94	Srvr.ServiceName	Srvr.ServiceName	Server:Service Name	Gets or sets the service name for the LabVIEW VI Server. This property is similar to the Service name option on the VI Server page of the Options dialog box.	R/W	X	X
20	Srvr.TCPActive	Srvr.TCPActive	Server:TCP Listener Active	Specifies whether the TCP interface to the VI Server is currently accepting connections. If the Property Node reference input is unwired, LabVIEW gets or sets the VI server port for the calling VI application instance.	R/W	X	X
1b	Srvr.TCPAccessList	Srvr.TCPAccess	Server:TCP/IP Access List	List that describes which TCP/IP addresses of remote clients may access the VI server. Each element in the array should start with '+' to allow access, or with '-' to deny access. For example, the array with the elements ['+*.site.com', '-private.site.com'] allows access for all hosts in the site.com domain, with the exception of private.site.com. This property is available only on local versions LabVIEW. If the Property Node reference input is unwired, LabVIEW gets or sets the VI server port for the calling VI application instance. This property is similar to the Machine access list option in the Machine access section on the VI Server page of the Options dialog box. Example	R/W	X	X
1a	Srvr.VIAccessList	Srvr.VIAccess	Server:VI Access List	List that describes which VIs on the VI server are accessible by remote clients. Each element in the array should start with '+' to allow access, or with '-' to deny access. For example, the array with the element ['+Server*'] allows access to all VIs whose name starts with 'Server'. This property is available only on local versions of LabVIEW. If the Property Node reference input is unwired, LabVIEW gets or sets the VI server port for the calling VI application instance. This property is similar to the Exported VIs list option in the Exported VIs section on the VI Server page of the Options dialog box.	R/W	X	X
6e	SCC.SCCDatabaseName	SCC.ConfigData	Source Control:Configuration Data		R/W	X			X
71	SCC.SCCDisplayOnlySelected	SCC.DispOnlySelectedFiles	Source Control:Display Only Selected Files		R/W	X			X
74	SCC.SCCDisplayWarningIfChkdOut	SCC.DispWarnIfChkdOut	Source Control:Display Warning If File Is Checked Out		R/W	X			X
9c	SCC.IncludeInstrLibInGetDependents	SCC.IncludeInstrLibInGetDependents	Source Control:Include InstrLib In Get Dependents		R/W	X			X
9b	SCC.IncludeVILibInGetDependents	SCC.IncludeVILibInGetDependents	Source Control:Include VILib In Get Dependents		R/W	X			X
77	SCC.SCCPromptToAddToProject	SCC.PromptToAddToSCC	Source Control:Prompt to Add to SCC When Adding to Project		R/W	X			X
76	SCC.SCCPromptToCheckOut	SCC.PromptToCheckOut	Source Control:Prompt to Check Out		R/W	X			X
70	SCC.SCCProviderLocation	SCC.ProvLoc	Source Control:Provider Location		R/W	X			X
6f	SCC.SCCProviderName	SCC.ProvName	Source Control:Provider Name		R/W	X			X
73	SCC.SCCSelectCallersWhenChkdOut	SCC.SelectCallersOnChkOut	Source Control:Select Callers When Checking Files Out		R/W	X			X
72	SCC.SCCSelectHierarchyWhenAdd	SCC.SelectHierarchyOnAdd	Source Control:Select Hierarchy When Adding Files		R/W	X			X
75	SCC.SCCUseDialogBox	SCC.UseDlgBoxForChkOut	Source Control:Use Dialog Box For File Checkout		R/W	X			X
b7	Statechart.CodeGenCaseStruct	Statechart.CodeGenCaseStruct	Statechart:CodeGenCaseStruct		R/W	X			X
bd	Statechart.InlineTopLevelGraph	Statechart.InlineTopLevelGraph	Statechart:InlineTopLevelGraph		R/W	X			X
ee	Statechart.IsInstalled	Statechart.IsInstalled	Statechart:Is Installed		R	X			X
b4	Statechart.Config	Statechart.Config	Statechart:Show Configuration		R	X			X
b3	Statechart.CustomIcon	Statechart.CustomIcon	Statechart:Show Custom Icon		R	X			X
b8	Statechart.ShowPathIsIn	Statechart.ShowPathIsIn	Statechart:Show Path for IsIn		R	X			X
a9	Suppress Auto Update Dependencies	SuppressAutoUpdateDependencies	Suppress Auto Update Dependencies		R/W	X			X
b0	SupressUpdateNamePreflight	SupressUpdateNamePreflight	Supress Update Name Preflight		R/W	X			X
ae	App.ToolNumber	App.ToolNumber	Tool Number		R/W	X			X
f3	VIObjCacheAvailableInRTE	VIObjCache.Available in RTE	VIObjCache:Available in RTE		R/W	X			X
f7	VIObjCache.DistPath	VIObjCache.DistPath	VIObjCache:DistPath		R				X
f8	VIObjCache.UserPath	VIObjCache.UserPath	VIObjCache:UserPath		R				X
b5	WebSrvr.ConfigFile	WebSrvr.ConfigFile	Web Server:Config File Path	The path of the LabVIEW Web Server configuration file.	R	X	X
b6	WebSrvr.DefConfigFile	WebSrvr.DefConfigFile	Web Server:Default Config File Path	The path of the Web Server configuration file that contains the LabVIEW default configuration.	R	X	X
30	WebSrvr.Port	WebSrvr.Port	Web Server:HTTP Port	The port to which the built-in Web Server listens for HTTP requests. This property is similar to the HTTP Port option on the Web Server page of the Options dialog box.	R/W	X	X
32	WebSrvr.LogEnabled	WebSrvr.LogEnabled	Web Server:Logging Enabled	Determines whether the built-in Web Server logs to a file information about HTTP requests. This property is similar to the Use Log File option on the Web Server page of the Options dialog box.	R/W	X	X
33	WebSrvr.LogPath	WebSrvr.LogPath	Web Server:Logging File Path	Determines where the built-in Web Server places the log file. This property is similar to the Log File Path option on the Web Server page of the Options dialog box.	R/W	X	X
31	WebSrvr.Timeout	WebSrvr.Timeout	Web Server:Read Timeout	Determines how long the built-in Web Server waits for read operations to complete when the Web Server reads HTTP requests from HTTP clients. This property is similar to the Timeout option on the Web Server page of the Options dialog box.	R/W	X	X
2f	WebSrvr.RootPath	WebSrvr.RootPath	Web Server:Root Directory Path	Specifies the root directory from which the built-in Web Server loads files for document requests. This property is similar to the Root Directory option on the Web Server page of the Options dialog box.	R/W	X	X
2e	WebSrvr.Active	WebSrvr.Active	Web Server:Server Active	Determines whether the built-in Web Server is enabled. This property immediately changes the status of the Web Server without requiring you to restart LabVIEW. Changes using this property are not saved across sessions of LabVIEW and are not reflected on the Web Server page of the Options dialog box. This property is similar to the Enable Remote Panel Server option on the Web Server page of the Options dialog box. However, you must restart LabVIEW to apply changes to this option. Unlike the Web Server:Server Active property, changes to this option are saved and appear the next time you open LabVIEW.	R/W	X	X
34	WebSrvr.TCPAccessList	WebSrvr.TCPAccess	Web Server:TCP/IP Access List	Sets or gets the TCP/IP addresses that have access to the Web Server. This property also sets or gets whether each address has access to view a VI remotely, view and control a VI remotely, or does not have access to the Web Server. You can use wildcards in the address you enter. This property is an array of strings, where each string is an address that begins with c+, +, or -. c+ specifies that the address has access to view and control a VI remotely. + specifies that the address has access to view a VI remotely. - specifies that the address does not have access to the Web Server. This property is similar to the Web Server page of the Options dialog box.	R/W	X	X
35	WebSrvr.VIAccessList	WebSrvr.VIAccess	Web Server:VI Access List	Sets or gets the VIs that are visible through the Web Server. This property also sets or gets whether LabVIEW allows access to each VI. This property is an array of strings, where each string is a VI name that begins with + or -. If you specify a non-default control time limit for a VI, the value appears before +. + specifies that LabVIEW allows access to the VI. - specifies that LabVIEW does not allow access to the VI. Note You can use this property to limit access to clones already in memory for remote front panel connections. Limiting access to clones is useful when you have a limited number of resources. To limit the number of clones created for remote front panel connections, use the Open VI Reference function to create the required number of clones. Use the VI Clone Name property to get the name of each clone. Limit the access to only those clones you created by adding each clone name beginning with + to the array and by adding the name of the original reentrant VI beginning with - to the array. This property is similar to the Web Server page of the Options dialog box.	R/W	X	X

Methods

Show/Hide Application Methods Table

Application Methods Table

Method ID	Data Name	Short Name	Long Name	RTE	B	S	P	D
80d	.NET.Convert Obj To LV Variant	.NET.Convert Obj To LV Variant	.NET:Convert Object To LabVIEW Variant	X			X
80c	.NET.Convert To .NET Type	.NET.Convert To .NET Type	.NET:Convert To .NET Type	X			X
80b	.NET.Get Assembly Full Name	.NET.Get Assembly Full Name	.NET:Get Assembly Full Name				X
883	.NET.Load Assembly	.NET.Load Assembly	.NET:Load Assembly To ObjMgr			X	X
807	Add Probe To Cache	Add Probe To Cache	Add Probe To Cache	X			X
870	Add To MRU	Add To MRU	Add To Most Recently Used List	X			X
910	AllowScripting	AllowScripting	Allow Scripting	X		X	X
997	IsGlobalBackwardCompatibleLoadEnabled	IsGlobalBackwardCompatibleLoadEnabled	BCRTE:IsGlobalBackwardCompatibleLoadEnabled	X			X
996	SetGlobalBackwardCompatibleLoadEnabled	SetGlobalBackwardCompatibleLoadEnabled	BCRTE:SetGlobalBackwardCompatibleLoadEnabled	X			X
88b	BitAccurateDataSizeForType	BitAccurateDataSizeForType	Bit Accurate Data Size For Type	X		X	X
7de	Bring To Front	Bring To Front	Bring To Front	X	X
7fb	Browse DataSocket	Browse DataSocket	Browse DataSocket	X	X
7e0	Build.Application	Build.Application	Build:Application				X
994	Build.BCRTEEnabledPackedLibrary	Build.BCRTEEnabledPackedLibrary	Build:BCRTEEnabledPackedLibrary				X
7e1	Build.Distribution	Build.Distribution	Build:Distribution				X
963	Build.Object Cache	Build.Object Cache	Build:Object Cache				X
951	Build.PackedLibrary	Build.PackedLibrary	Build:PackedLibrary				X
811	C TypeDefs.Get	C TypeDefs.Get	C TypeDefs:Get	X			X
810	C TypeDefs.Reset	C TypeDefs.Reset	C TypeDefs:Reset	X			X
7e6	Call Internal Cmd	Call Internal Cmd	Call Internal Command	X			X
97a	Change Popup Paths	Change Popup Paths	Change Control Popup RTM Paths				X
7e8	Class Operator.Get	Class Operator.Get	Class Operator:Get	X		X
7ea	Class Operator.Remove	Class Operator.Remove	Class Operator:Remove	X		X
7eb	Class Operator.Remove All	Class Operator.Remove All	Class Operator:Remove All	X		X
7e9	Class Operator.Set	Class Operator.Set	Class Operator:Set	X		X
971	ClearAppBuilderCache	ClearAppBuilderCache	Clear Application Builder Cache		X
95b	ClearCompObjCache	ClearCompObjCache	Clear Compiled Object Cache		X
942	ClearInstantiationCacheCache	ClearInstantiationCacheCache	Clear Instantiation Cache Cache				X
968	ClearSpecCompObjCache	ClearSpecCompObjCache	Clear Specific Compiled Object Cache				X
7ef	Clipboard.Empty	Clipboard.Empty	Clipboard:Empty			X
7ed	Clipboard.Get Image	Clipboard.Get Image	Clipboard:Get Image	X	X
851	Clipboard.Read	Clipboard.Read	Clipboard:Read From Clipboard	X	X
852	Clipboard.Write	Clipboard.Write	Clipboard:Write to Clipboard	X	X
993	CloseLEIFBuildData	CloseLEIFBuildData	Close LEIF Build Data Cookie				X
920	CodeCov.AllVIs	CodeCov.AllVIs	Code Coverage:All VIs Measured				X
91e	CodeCov.Reset	CodeCov.Reset	Code Coverage:Reset				X
91f	CodeCov.Reset VI	CodeCov.Reset VI	Code Coverage:Reset VI				X
923	CodeCov.ShowUnrunDiags	CodeCov.ShowUnrunDiags	Code Coverage:Show Uncovered Diagrams				X
91c	CodeCov.Start	CodeCov.Start	Code Coverage:Start				X
91d	CodeCov.Stop	CodeCov.Stop	Code Coverage:Stop				X
922	CodeCov.UnrunDiags	CodeCov.UnrunDiags	Code Coverage:Uncovered Diagrams				X
921	CodeCov.VIPercentage	CodeCov.VIPercentage	Code Coverage:VI Percentage				X
958	Compare CPTMs For Packed Library	Compare CPTMs For Packed Library	Compare:CPTMs For Packed Library	X			X
84f	Cmp Data Types	Cmp Data Types	Compare:Data Types	X			X
7f3	Compile VIs Needing Compilation	Compile VIs Needing Compilation	Compile VIs Needing Compilation				X
95e	Compile App Context	Compile App Context	Compiler:Compile App Context	X			X
952	GetCompilerSettings	GetCompilerSettings	Compiler:Get Compiler Settings	X			X
98e	IsCalleeInlined	IsCalleeInlined	Compiler:Is Callee Inlined	X			X
94d	ReadDFIRTokens	ReadDFIRTokens	Compiler:Read DFIR Tokens	X			X
953	SetCompilerSettings	SetCompilerSettings	Compiler:Set Compiler Settings	X			X
823	Config.Get Settings	Config.Get Settings	Configuration:Get Settings	X			X
83d	Config.Get Target App's Settings	Config.Get Target App's Settings	Configuration:Get Target App's Settings	X			X
83c	Config.Set Settings	Config.Set Settings	Configuration:Set Settings	X			X
83e	Config.Set Target App's Settings	Config.Set Target App's Settings	Configuration:Set Target App's Settings	X			X
7f7	Conn Responsive.Check	Conn Responsive.Check	Connection Responsiveness:Check	X	X
7f8	Conn Responsive.Info	Conn Responsive.Info	Connection Responsiveness:Information	X	X
957	Consolidated Save	Consolidated Save	Consolidated Save				X
815	Context.CreateLocalHostAppInstance	Context.CreateLocalHostAppInstance	Context:Create Local Host App Instance	X			X
974	Context.CrossContextLoadVI	Context.CrossContextLoadVI	Context:Cross Context Load Unsaved VI	X			X
86d	Context.GetFromProj	Context.GetFromProj	Context:Get From Project				X
81e	Context.Get Preferred	Context.Get Preferred	Context:Get Preferred	X			X
812	Context.OpenSibling	Context.OpenSibling	Context:Open Sibling	X			X
864	Context.Ref Count.Dec	Context.Ref Count.Dec	Context:Reference Count:Decrement	X			X
863	Context.Ref Count.Inc	Context.Ref Count.Inc	Context:Reference Count:Increment	X			X
936	CopyDataConvert	CopyDataConvert	Copy Data Convert	X		X	X
809	Create COM WDT Data	Create COM WDT Data	Create COM WDT Data	X			X
89f	CreateGUID	CreateGUID	Create GUID	X			X
932	CreateInstantiation	CreateInstantiation	Create Generic VI Instantiation			X	X
850	Data Type Color	Data Type Color	Data Type Color	X		X
845	DbgConn.CloseDbgConn	DbgConn.CloseDbgConn	Debug Connection:Close Debug Connection		X
89e	DbgConn.GetDbgConn	DbgConn.GetDbgConn	Debug Connection:Get Debug Connection				X
846	DbgConn.ListApps	DbgConn.ListApps	Debug Connection:List Applications or Shared Libraries		X
844	DbgConn.OpenDbgConn	DbgConn.OpenDbgConn	Debug Connection:Open Debug Connection		X
89b	DebugStartTiming	DebugStartTiming	Debug Start Timing	X			X
944	DTT.FilterVILibEvents	DTT.FilterVILibEvents	Desktop Tracing:Filter VI Lib Events	X			X
906	DTT.GetTraceData	DTT.GetTraceData	Desktop Tracing:Get Trace Data	X			X
916	DTT.IsTracingEnabled	DTT.IsTracingEnabled	Desktop Tracing:Is Tracing Enabled	X			X
905	DTT.Setup	DTT.Setup	Desktop Tracing:Setup	X			X
98a	DoPostInstallObjCacheCheck	DoPostInstallObjCacheCheck	Do Post Install ObjCache Check				X
911	EnableExternalProptypes	EnableExternalProptypes	Enable External Proptypes	X		X	X
913	EnableMetaTrans	EnableMetaTrans	Enable Meta Transactions	X		X	X
912	EnableTempSelect	EnableTempSelect	Enable Temp Selection	X			X
915	DeferErrWinUpdates	DeferErrWinUpdates	Error Window:Defer Updates				X
89d	OpenErrWdw	OpenErrWdw	Error Window:Open	X			X
967	FlushArcCaching	FlushArcCaching	Flush Archive Caching	X		X	X
882	ForceAutoSave	ForceAutoSave	Force AutoSave				X
902	ForceUpdateDiskMonitoring	ForceUpdateDiskMonitoring	Force Update Disk Monitoring	X			X
978	Freeze Polys	Freeze Polys	Freeze Poly VIs				X
91b	GetActiveVIRef	GetActiveVIRef	Get Active VI Reference			X
97d	Get Broken VI List	Get Broken VI List	Get Broken VI List			X	X
86c	GetClassNameFromID	GetClassNameFromID	Get Class Name From Class ID	X			X
95a	GetEnvModeDisplayName	GetEnvModeDisplayName	Get Environment Mode Display Name	X	X
946	GetEnvModePath	GetEnvModePath	Get Environment Mode Settings Path				X
909	Get Global Dependency Data	Get Global Dependency Data	Get Global Dependency Data	X			X
943	GetInstantiationConPaneFromCache	GetInstantiationConPaneFromCache	Get Instantiation ConPane From Cache				X
979	GetInstantiationVIPath	GetInstantiationVIPath	Get Instantiation VI Path	X			X
836	Get Shell Icon Of File	Get Shell Icon Of File	Get Shell Icon Of File	X			X
938	Get Hier Img Scaled	Get Hier Img Scaled	Get VI Hierarchy Image Scaled	X	X
989	Get VI.Bookmarks	Get VI.Bookmarks	Get VI:Bookmarks	X	X
97f	Get VI.CompiledForCurrent	Get VI.CompiledForCurrent	Get VI:Compiled For Current				X
99c	Get VI.ConPane CRC Ignore DD v2	Get VI.ConPane CRC Ignore DD v2	Get VI:ConPane CRC Ignore Dynamic Dispatch v2	X			X
99b	Get VI.ConPane CRC v3	Get VI.ConPane CRC v3	Get VI:ConPane CRC v3	X			X
91a	Get VI.ConPane DataType	Get VI.ConPane DataType	Get VI:ConPane DataType	X		X
806	Get VI.Description	Get VI.Description	Get VI:Description	X	X
947	Get VI Editor Version	Get VI Editor Version	Get VI:Editor Version	X	X
98d	Get VI.GetPrimDeps	Get VI.GetPrimDeps	Get VI:Get Prim Dependency Flags			X	X
990	Get VI.Help Info	Get VI.Help Info	Get VI:Help Info	X	X
88c	Get VI.Icon	Get VI.Icon	Get VI:Icon	X	X
97e	Get VI.Is Global	Get VI.Is Global	Get VI:Is Global				X
860	Get VI.Is Probe	Get VI.Is Probe	Get VI:Is Probe		X
948	Get VI.Qualified Name	Get VI.Qualified Name	Get VI:Qualified Name	X	X
886	Get VI.Revision History	Get VI.Revision History	Get VI:Revision History	X	X
805	Get VI.Title	Get VI.Title	Get VI:Title	X	X
7f9	Get VI Version	Get VI Version	Get VI:Version	X	X
970	Get Compiled Object File	Get Compiled Object File	GetCompiledObjectFile	X			X
841	Global Data.Free	Global Data.Free	Global Data:Free	X			X
840	Global Data.Get	Global Data.Get	Global Data:Get	X			X
83f	Global Data.Set	Global Data.Set	Global Data:Set	X			X
862	GetDataTypeHelpImage	GetDataTypeHelpImage	Help Image:Get Data Type Help Image				X
868	Get Func Help Image	Get Func Help Image	Help Image:Get Function Context Help Image				X
7da	History Since	History Since	History Since				X
82c	I/O Ctrl.Get Name Attributes	I/O Ctrl.Get Name Attributes	I/O Control:Get Name Attributes	X			X
82b	I/O Ctrl.Get Names	I/O Ctrl.Get Names	I/O Control:Get Names	X			X
80a	Image Data To Byte Array	Image Data To Byte Array	Image Data To Byte Array	X			X
964	Install Adjacent Cache	Install Adjacent Cache	Install Adjacent Cache				X
90a	Invalidate Depdendency File Info	Invalidate Depdendency File Info	Invalidate Depdendency File Info	X			X
7e4	LVRT.Check DLLs	LVRT.Check DLLs	LVRT:Check DLLs				X
7e3	Disconnect From Slave	Disconnect From Slave	LVRT:Disconnect From Slave		X
961	LVRT.Get LibP Sigs	LVRT.Get LibP Sigs	LVRT:Get Packed Library Signatures				X
872	LVRT.Transfer Files	LVRT.Transfer Files	LVRT:Transfer Files To Target				X
859	LVRT.Unload Startup App	LVRT.Unload Startup App	LVRT:Unload Startup App				X
98b	All Methods Of LVClass	All Methods Of LVClass	LabVIEW Class:All Methods of LVClass	X	X
88f	LVClass.Create	LVClass.Create	LabVIEW Class:Create		X
98c	LVClass Implementing VI Path	LVClass Implementing VI Path	LabVIEW Class:Get Implementing VI Path	X	X
88e	LVClass.Open	LVClass.Open	LabVIEW Class:Open		X
956	Release LV Class Cookies	Release LV Class Cookies	LabVIEW Class:Release LV Class Cookies	X			X
826	Library.Create	Library.Create	Library:Create		X
895	Library.Deploy Libraries	Library.Deploy Libraries	Library:Deploy Libraries	X	X
849	Library.Deploy Library	Library.Deploy Library	Library:Deploy Library	X	X
86e	Library.GetFileLVVersion	Library.GetFileLVVersion	Library:Get File LabVIEW Version	X	X
935	Library.Get Ref By Qualified Name	Library.Get Ref By Qualified Name	Library:Get Ref By Qualified Name	X	X
982	Library.Has Shared Variables	Library.Has Shared Variables	Library:Has Shared Variables				X
95d	Library.IsOpenedInAnyContext	Library.IsOpenedInAnyContext	Library:Is Opened In Any Context				X
825	Library.Open	Library.Open	Library:Open	X	X
89a	Library.OpenAsUntitled	Library.OpenAsUntitled	Library:OpenAsUntitled				X
92f	Library.Undeploy Libraries	Library.Undeploy Libraries	Library:Undeploy Libraries	X	X
84e	Library.UndeployLibrary	Library.UndeployLibrary	Library:Undeploy Library	X	X
820	License.Check In	License.Check In	License:Check In	X			X
81f	License.Check Out	License.Check Out	License:Check Out	X			X
92d	License.Get Feature Activators	License.Get Feature Activators	License:Get Feature Activators	X			X
848	License.Get Feature Status	License.Get Feature Status	License:Get Feature Status	X			X
83a	License.Get Licensed Version	License.Get Licensed Version	License:Get Licensed Version	X			X
816	Linker.Notify of File Change	Linker.Notify of File Change	Linker:Notify of File Change			X	X
89c	Linker.Read Info From File	Linker.Read Info From File	Linker:Read Info From File				X
998	Linker.Read Info From File Exclude LVRT Shipped Libs	Linker.Read Info From File Exclude LVRT Shipped Libs	Linker:Read Info From File Exclude LVRT Shipped Libs				X
843	Linker.Write Info To File	Linker.Write Info To File	Linker:Write Info To File				X
7d5	Mass Compile	Mass Compile	Mass Compile		X
918	CheckMathScriptWatchedPaths	CheckMathScriptWatchedPaths	MathScript:Check Watched Paths			X	X
937	LoadMSCompiler	LoadMSCompiler	MathScript:Load MathScript Compiler				X
980	LoadMSCompilerComponent	LoadMSCompilerComponent	MathScript:Load MathScript Compiler Component				X
945	LocateMSTargetSyntaxVI	LocateMSTargetSyntaxVI	MathScript:Locate Math Script Target Syntax VI				X
991	DSObserverCmd	DSObserverCmd	Memory Profiling:DSObserver Command	X			X
981	Refresh Menus	Refresh Menus	Menus:Refresh		X
933	Move VIs	Move VIs	Move VIs	X			X
903	MultiPwdPromptOperation.Begin	MultiPwdPromptOperation.Begin	Multi Pwd Prompt Operation:Begin			X	X
904	MultiPwdPromptOperation.End	MultiPwdPromptOperation.End	Multi Pwd Prompt Operation:End			X	X
84b	NI Sec.ChangePassword	NI Sec.ChangePassword	NI Security:Change Password	X			X
82a	NI Security.Get Access Rights	NI Security.Get Access Rights	NI Security:Get Access Rights	X	X
84c	NI Sec.GetDomains	NI Sec.GetDomains	NI Security:Get Domains	X			X
829	NI Security.Invoke Login Dialog	NI Security.Invoke Login Dialog	NI Security:Invoke Login Dialog	X	X
827	NI Security.Login	NI Security.Login	NI Security:Login	X	X
828	NI Security.Logout	NI Security.Logout	NI Security:Logout	X	X
865	NI Security.SVE Login	NI Security.SVE Login	NI Security:Shared Variable Engine Login	X			X
866	NI Security.SVE Logout	NI Security.SVE Logout	NI Security:Shared Variable Engine Logout	X			X
867	NI Security.SVE User	NI Security.SVE User	NI Security:Shared Variable Engine User	X			X
949	OpenVIInNXTContext	OpenVIInNXTContext	NXT:Open VI In Context				X
941	UpdateNXTContextName	UpdateNXTContextName	NXT:Update Context Name				X
99a	NativeEventTracingSetup	NativeEventTracingSetup	NativeEventTracing:Setup	X			X
7ff	New LabVIEW Document	New LabVIEW Document	New LabVIEW Document			X
88d	Notify LV SCC Enabled	Notify LV SCC Enabled	Notify LV SCC Enabled	X			X
986	Object Manager:Get Classes	Object Manager:Get Classes	Object Manager:Get Classes	X			X
985	Object Manager:Get Managers	Object Manager:Get Managers	Object Manager:Get Managers	X			X
987	Object Manager:Get Properties	Object Manager:Get Properties	Object Manager:Get Properties	X			X
988	Object Manager:Show Help	Object Manager:Show Help	Object Manager:Show Help	X			X
81b	Open.LV Document	Open.LV Document	Open:LabVIEW Document			X
919	Open.LV Documents	Open.LV Documents	Open:LabVIEW Documents				X
830	Open.Recently Opened File	Open.Recently Opened File	Open:Recently Opened File	X		X
854	Open.Recently Opened Project	Open.Recently Opened Project	Open:Recently Opened Project	X		X
90d	OpenVIAsSystemVI	OpenVIAsSystemVI	Open:VI As System VI	X			X
901	OpenVIAsTemplate	OpenVIAsTemplate	Open:VI As Template	X			X
962	Open.VI Without Refees	Open.VI Without Refees	Open:VI Without Refees	X			X
992	OpenBinaryLibrary	OpenBinaryLibrary	OpenBinaryLibrary	X			X
95f	Packed Library.Enable Caching	Packed Library.Enable Caching	Packed Library:Enable Caching	X			X
95c	Packed Library.Get Exported File List	Packed Library.Get Exported File List	Packed Library:Get Exported File List	X			X
995	PackedLibrary.IsLoadableInBinaryCompatibleLV	PackedLibrary.IsLoadableInBinaryCompatibleLV	Packed Library:Is Packed Library Loadable In Binary Compatible LabVIEW	X			X
930	Close All Palettes	Close All Palettes	Palettes:Close All Palettes		X
966	Force Finsh Load All Palettes	Force Finsh Load All Palettes	Palettes:Force Finsh Load All Palettes				X
80e	Get Pal Menu Info	Get Pal Menu Info	Palettes:Get Menu Information				X
94c	Get Pal Item Icon	Get Pal Item Icon	Palettes:Get Palette Item Icon				X
959	Get Pal Item Path	Get Pal Item Path	Palettes:Get Palette Item Path	X	X
965	Get Palette Statistics	Get Palette Statistics	Palettes:Get Palette Statistics				X
861	Refresh Palettes	Refresh Palettes	Palettes:Refresh		X
801	Pwd.Add To Cache	Pwd.Add To Cache	Password:Add To Cache	X			X
800	Pwd.Clear Cache	Pwd.Clear Cache	Password:Clear Cache	X			X
858	Pwd.Del From Cache	Pwd.Del From Cache	Password:Delete From Cache	X			X
94b	App.PrepareToLoadFiles	App.PrepareToLoadFiles	Prepare to Load Files	X			X
7d0	Print.Function To Printer	Print.Function To Printer	Print:Function To Printer				X
94e	CreateProbeVIFromVariant	CreateProbeVIFromVariant	Probes:Create Probe VI From Variant			X	X
94f	GetProbePathListFromVariant	GetProbePathListFromVariant	Probes:Get Probe Path List From Variant			X	X
893	Project.Close Refs	Project.Close Refs	Project:Close Refs	X			X
818	Project.Do New Item	Project.Do New Item	Project:Do New Item				X
90f	Project.DoingAutosaveRecovery	Project.DoingAutosaveRecovery	Project:Doing Auto Save Recovery	X			X
954	Project.GetFileLVVersion	Project.GetFileLVVersion	Project:Get File LabVIEW Version	X	X
837	Project.Get Icon Of Type	Project.Get Icon Of Type	Project:Get Icon Of Type	X			X
817	Project.Get New Items	Project.Get New Items	Project:Get New Items	X			X
835	Project.Load Default Project	Project.Load Default Project	Project:Load Default Project	X			X
814	Project.New	Project.New	Project:New		X
97b	Project.NewWithPrompts	Project.NewWithPrompts	Project:New with Prompts			X
813	Project.Open	Project.Open	Project:Open	X	X
999	Project.Open And Suppress Source-Only	Project.Open And Suppress Source-Only	Project:Open And Suppress Source-Only			X
899	Project.OpenAsUntitled	Project.OpenAsUntitled	Project:Open As Untitled				X
871	Project.OpenPrivCtxts	Project.OpenPrivCtxts	Project:Open With Private Contexts	X			X
90b	Project.Register Debug VI	Project.Register Debug VI	Project:Register Debug VI	X			X
82f	Project.Reg Proj Ref For Cleanup Proc	Project.Reg Proj Ref For Cleanup Proc	Project:Register Proj Ref For Cleanup Proc				X
90c	Project.Simulate File Open	Project.Simulate File Open	Project:Simulate File Open	X			X
7e7	Query Internal Operation Tracking Data	Query Internal Operation Tracking Data	Query Internal Operation Tracking Data	X			X
81c	RecentOpen.LV Files	RecentOpen.LV Files	Recently Opened:LV Files			X
853	RecentOpen.LVProjects	RecentOpen.LVProjects	Recently Opened:LV Projects			X
7f2	RP.Client Network Load	RP.Client Network Load	Remote Panel:Client Network Load	X			X
804	RP.Client Release Control	RP.Client Release Control	Remote Panel:Client Release Control	X	X
803	RP.Client Request Control	RP.Client Request Control	Remote Panel:Client Request Control	X	X
802	RP.Close Connection To Server	RP.Close Connection To Server	Remote Panel:Close Connection To Server	X	X
7f1	RP.Open Connection To Server	RP.Open Connection To Server	Remote Panel:Open Connection To Server	X	X
7ee	RP.Server Network Load	RP.Server Network Load	Remote Panel:Server Network Load	X			X
97c	ResetCrossCompileCount	ResetCrossCompileCount	Reset Cross Compile Count				X
969	Restart	Restart	Restart	X	X
955	Save All	Save All	Save All	X			X
84d	Save Stock Objects	Save Stock Objects	Save Stock Objects				X
877	Scene.Drawable.Geometry.New Box	Scene.Drawable.Geometry.New Box	Scene:Drawable:Geometry:New Box	X	X
878	Scene.Drawable.Geometry.New Cone	Scene.Drawable.Geometry.New Cone	Scene:Drawable:Geometry:New Cone	X	X
879	Scene.Drawable.Geometry.New Cylinder	Scene.Drawable.Geometry.New Cylinder	Scene:Drawable:Geometry:New Cylinder	X	X
87a	Scene.Drawable.Geometry.New Height Field	Scene.Drawable.Geometry.New Height Field	Scene:Drawable:Geometry:New Height Field	X	X
87c	Scene.Drawable.Geometry.New Mesh	Scene.Drawable.Geometry.New Mesh	Scene:Drawable:Geometry:New Mesh	X	X
87b	Scene.Drawable.Geometry.New Sphere	Scene.Drawable.Geometry.New Sphere	Scene:Drawable:Geometry:New Sphere	X	X
900	Scene.Drawable.New Text	Scene.Drawable.New Text	Scene:Drawable:New Text	X	X
87e	Scene.New Clip Plane	Scene.New Clip Plane	Scene:New Clip Plane	X	X
889	Scene.New Light	Scene.New Light	Scene:New Light	X	X
873	Scene.New Object	Scene.New Object	Scene:New Object	X	X
874	Scene.New Texture	Scene.New Texture	Scene:New Texture	X	X
87f	Scene.New Window	Scene.New Window	Scene:New Window	X	X
881	Scene.Read Scene File	Scene.Read Scene File	Scene:Read Scene File	X	X
880	Scene.Write Scene File	Scene.Write Scene File	Scene:Write Scene File	X	X
93a	SearchCloseSession	SearchCloseSession	Search:Close Session				X
93c	SearchInitSession	SearchInitSession	Search:Init Session				X
93b	SearchLoadPlugin	SearchLoadPlugin	Search:Load Plugin				X
939	SearchOpenSession	SearchOpenSession	Search:Open Session				X
93e	SearchSyncSearchForQD	SearchSyncSearchForQD	Search:Sync Search For QD				X
93d	SearchSyncSearch	SearchSyncSearch	Search:SyncSearch				X
888	Sig.GetSignatureFromVIFile	Sig.GetSignatureFromVIFile	Signature:Get Signature From VI File	X			X
887	Sig.GetUserCodeGUIDFromVIFile	Sig.GetUserCodeGUIDFromVIFile	Signature:Get User Code GUID From VI File	X			X
960	Simulation.GetParamOffsets	Simulation.GetParamOffsets	Simulation:Get Parameter Offsets	X			X
898	Statechart.Create	Statechart.Create	Statechart:Create		X
897	Statechart.Open	Statechart.Open	Statechart:Open		X
90e	Statechart.Open Private	Statechart.Open Private	Statechart:Open Private	X			X
914	Symbols.GetValue	Symbols.GetValue	Symbols:Get Value				X
890	SyncEverything	SyncEverything	Synchronize Everything	X			X
85b	Tag.Get Tag	Tag.Get Tag	Tag:Get Tag	X			X
85d	Tag.Remove All Tags	Tag.Remove All Tags	Tag:Remove All Tags	X			X
85e	Tag.Remove Tag	Tag.Remove Tag	Tag:Remove Tag	X			X
85c	Tag.Set Tag	Tag.Set Tag	Tag:Set Tag	X			X
884	Get VI Tag	Get VI Tag	Tag:VI:Get VI Tag	X			X
896	Get VI Tag Names	Get VI Tag Names	Tag:VI:Get VI Tag Names	X			X
885	Set VI Tag	Set VI Tag	Tag:VI:Set VI Tag				X
972	TracingTimerEnable	TracingTimerEnable	Tracing Timer Enable				X
973	TracingTimerHarvestLogAndReset	TracingTimerHarvestLogAndReset	Tracing Timer Harvest Log And Reset				X
869	TD.AddPathInfo	TD.AddPathInfo	Type Descriptor:Add Path Info			X	X
86a	TD.CleanPathInfo	TD.CleanPathInfo	Type Descriptor:Clean Path Info			X	X
86f	TD.HasCompletePathInfo	TD.HasCompletePathInfo	Type Descriptor:Has Complete Path Info			X	X
86b	TD.RecTypedefDisconnect	TD.RecTypedefDisconnect	Type Descriptor:Recursive Typedef Disconnect			X	X
88a	Update Launch Message	Update Launch Message	Update Launch Message	X			X
924	UI:Abort Merge VIs	UI:Abort Merge VIs	User Interaction:Abort Merge VIs				X
7d6	UI.Cmp VIs	UI.Cmp VIs	User Interaction:Compare VIs				X
983	UI.Cmp VIs XML	UI.Cmp VIs XML	User Interaction:Compare VIs XML				X
931	UI.Edit Icon	UI.Edit Icon	User Interaction:Edit Icon				X
7fd	UI.Hilight Pal Menu Item	UI.Hilight Pal Menu Item	User Interaction:Hilight Palette Menu Item			X
81a	UI.Invoke Menu Item	UI.Invoke Menu Item	User Interaction:Invoke Menu Item	X		X
839	UI.Invoke Prefs Dlg	UI.Invoke Prefs Dlg	User Interaction:Invoke Preferences Dialog	X			X
92b	UI:Merge Clean Up Context	UI:Merge Clean Up Context	User Interaction:Merge Clean Up Context				X
92a	UI:Merge Close Library	UI:Merge Close Library	User Interaction:Merge Close Library				X
928	UI:Merge Close VI	UI:Merge Close VI	User Interaction:Merge Close VI				X
927	UI:Merge Cross Load VI	UI:Merge Cross Load VI	User Interaction:Merge Cross Load VI				X
929	UI:Merge Load Library	UI:Merge Load Library	User Interaction:Merge Load Library				X
92e	UI:Merge Load Refees	UI:Merge Load Refees	User Interaction:Merge Load Refees				X
925	UI:Merge Load VI	UI:Merge Load VI	User Interaction:Merge Load VI				X
92c	UI:Merge Save Library	UI:Merge Save Library	User Interaction:Merge Save Library				X
926	UI:Merge Save VI	UI:Merge Save VI	User Interaction:Merge Save VI				X
894	UI.Merge VIs	UI.Merge VIs	User Interaction:Merge VIs				X
93f	UI.PlaceObjectOnCursor	UI.PlaceObjectOnCursor	User Interaction:Place Object On Cursor			X
7fa	UI.PlacePaletteObjOnCursor	UI.PlacePaletteObjOnCursor	User Interaction:Place Palette Object on Cursor			X
940	UI.Drop Proj Item Copy	UI.Drop Proj Item Copy	User Interaction:Place Project Item On Cursor				X
81d	UI.Search LabVIEW Help	UI.Search LabVIEW Help	User Interaction:Search LabVIEW Help				X
7f4	UI.Show Inplaceness Terminals	UI.Show Inplaceness Terminals	User Interaction:Show Inplaceness Terminals				X
98f	UI.ShowPaletteObjContextHelp	UI.ShowPaletteObjContextHelp	User Interaction:Show Palette Object Context Help			X
855	VIs Strings.Export	VIs Strings.Export	VIs Strings:Export		X
857	VIs Strings.Export Private	VIs Strings.Export Private	VIs Strings:Export Private				X
856	VIs Strings.Import	VIs Strings.Import	VIs Strings:Import	X	X
917	WebSrvr.Conf	WebSrvr.Conf	Web Server:Configure	X	X
831	XControl.Create	XControl.Create	XControl:Create		X
833	XControl.Open	XControl.Open	XControl:Open		X
832	XNode.Create	XNode.Create	XNode:Create				X
834	XNode.Open	XNode.Open	XNode:Open				X

Events

Show/Hide Application EventsTable

Application Events Table

Code	Name	Type	B	S	P	D
1073741888	Application Activation	Notify		X
1073741850	Application Instance Close	Notify	X
2147483652	Application Instance Close?	Filter	X
1073741908	Auto Error Notification	Notify			X
1073741906	Bookmark Info Change	Notify	X
1073741896	Context Help Window Updated	Notify		X
1073741883	NI Security User Change	Notify	X
1073741889	OS Open Document	Notify			X
2147483717	OS Open Document?	Filter			X
1073741897	Selection Change	Notify			X
1073741825	Timeout	Notify	X
1073741857	VI Activation	Notify		X
1073741907	VI Deactivation	Notify		X
1073741858	VI Redraw	Notify			X
1073741859	VI Scroll	Notify		X
1073741899	Window Opened	Notify			X
2147483722	Window Opened?	Filter			X

History

Version	Change(s)
	Linker:Read Info From File Exclude LVRT Shipped Libs property added. Application:SaveChangesAutoSelection method added.
	Application:ImageTableMaxCount, Application:Enable Binary Compatibility Load, Application:EnableExcursionFreeExecSystems, Application:IgnoreUnresolvedDLLRef, Application:ImageTableCount, Application:PPL LoadInCompatible LVVersion Default Value, and Application:Treat LV 2016 As Binary Compatible properties added. Application:ImageTableCount property deprecated. Build:BCRTEEnabledPackedLibrary, Packed Library:Is Packed Library Loadable In Binary Compatible LabVIEW, BCRTE:SetGlobalBackwardCompatibleLoadEnabled, and BCRTE:IsGlobalBackwardCompatibleLoadEnabled methods added.
	Application:Enable Inheritance LinkRef Addition, Application:Enable Inheritance LinkRefs, Application:Version Year Number Only, and Application:ImageTableCount Is Running Interactively properties added. Application:ImageTableSize property deprecated.

See Also

• VI Server Class Hierarchy
• VI Server
• VI Scripting
• Application reference
• Application instance