Jump to content

List of errors: Difference between revisions

From LabVIEW Wiki
← Older editNewer edit →
Visual
added more
added more
Line 1,248: Line 1,248:
| [[Error Code -1967345147|-1967345147]]
| [[Error Code -1967345147|-1967345147]]
| LabVIEW: (Hex 0x8ABCB205) Entry not found.
| LabVIEW: (Hex 0x8ABCB205) Entry not found.
|-
| [[Error Code -1950679041|-1950679041]]
| LabVIEW: (Hex 0x8BBAFFFF) The prototype of a shared variable whose data type is custom cannot be an empty variant.
|-
| [[Error Code -1950679040|-1950679040]]
| LabVIEW: (Hex 0x8BBB0000) The value from this shared variable might not be the most current value from the data source.
|-
| [[Error Code -1950679039|-1950679039]]
| LabVIEW: (Hex 0x8BBB0001) Sensor failure
|-
| [[Error Code -1950679038|-1950679038]]
| LabVIEW: (Hex 0x8BBB0002) General device error response.
|-
| [[Error Code -1950679037|-1950679037]]
| LabVIEW: (Hex 0x8BBB0003) The shared variable specified in the binding URL does not exist in the process. Ensure that all shared variables are deployed and the variable identifier URL is correct.
|-
| [[Error Code -1950679036|-1950679036]]
| LabVIEW: (Hex 0x8BBB0004) General communications failure.
|-
| [[Error Code -1950679035|-1950679035]]
| LabVIEW: (Hex 0x8BBB0005) Unable to locate the shared variable in the Shared Variable Engine (SVE). Deployment of this shared variable may have failed, the SVE has not started, or the SVE is too busy to respond to this request.
|-
| [[Error Code -1950679034|-1950679034]]
| LabVIEW: (Hex 0x8BBB0006) The shared variable has no value.
|-
| [[Error Code -1950679033|-1950679033]]
| LabVIEW: (Hex 0x8BBB0007) The shared variable is inactive.
|-
| [[Error Code -1950679032|-1950679032]]
| LabVIEW: (Hex 0x8BBB0008) Sensor inaccurate
|-
| [[Error Code -1950679031|-1950679031]]
| LabVIEW: (Hex 0x8BBB0009) Engineering unit limits exceeded.
|-
| [[Error Code -1950679030|-1950679030]]
| LabVIEW: (Hex 0x8BBB000A) Unspecified error
|-
| [[Error Code -1950679029|-1950679029]]
| LabVIEW: (Hex 0x8BBB000B) Math error
|-
| [[Error Code -1950679028|-1950679028]]
| LabVIEW: (Hex 0x8BBB000C) Communications link failure
|-
| [[Error Code -1950679027|-1950679027]]
| LabVIEW: (Hex 0x8BBB000D) NI-PSP has not connected to the server yet
|-
| [[Error Code -1950679026|-1950679026]]
| LabVIEW: (Hex 0x8BBB000E) DNS lookup failed for the server.
|-
| [[Error Code -1950679025|-1950679025]]
| LabVIEW: (Hex 0x8BBB000F) The server is not reachable.
|-
| [[Error Code -1950679024|-1950679024]]
| LabVIEW: (Hex 0x8BBB0010) Service lookup failed for the server.
|-
| [[Error Code -1950679023|-1950679023]]
| LabVIEW: (Hex 0x8BBB0011) The process specified in the binding URL does not exist. Ensure that all shared variables are deployed and the variable identifier URL is correct.
|-
| [[Error Code -1950679022|-1950679022]]
| LabVIEW: (Hex 0x8BBB0012) The process was not found or is not responding.
|-
| [[Error Code -1950679021|-1950679021]]
| LabVIEW: (Hex 0x8BBB0013) Failed to resolve URL for this shared variable.
|-
| [[Error Code -1950679020|-1950679020]]
| LabVIEW: (Hex 0x8BBB0014) Unable to access the shared variable. This error can occur if you attempt to read from a write-only variable or write to a read-only variable, or if you do not have permission to access the variable.
|-
| [[Error Code -1950679019|-1950679019]]
| LabVIEW: (Hex 0x8BBB0015) Subscribe failed. This error can occur when a client attempts to connect to a host using Logos, when the host only supports LogosXT.
|-
| [[Error Code -1950679018|-1950679018]]
| LabVIEW: (Hex 0x8BBB0016) Invalid URL for this shared variable.
|-
| [[Error Code -1950679017|-1950679017]]
| LabVIEW: (Hex 0x8BBB0017) Invalid combination of feature packs
|-
| [[Error Code -1950679016|-1950679016]]
| LabVIEW: (Hex 0x8BBB0018) Invalid float value.
|-
| [[Error Code -1950679015|-1950679015]]
| LabVIEW: (Hex 0x8BBB0019) Invalid Boolean value.
|-
| [[Error Code -1950679014|-1950679014]]
| LabVIEW: (Hex 0x8BBB001A) Value attribute not found.
|-
| [[Error Code -1950679013|-1950679013]]
| LabVIEW: (Hex 0x8BBB001B) Invalid access type.
|-
| [[Error Code -1950679012|-1950679012]]
| LabVIEW: (Hex 0x8BBB001C) Missing access type.
|-
| [[Error Code -1950679011|-1950679011]]
| LabVIEW: (Hex 0x8BBB001D) Invalid URL syntax.
|-
| [[Error Code -1950679010|-1950679010]]
| LabVIEW: (Hex 0x8BBB001E) Shared variable is bound but the path or URL is not specified.
|-
| [[Error Code -1950679009|-1950679009]]
| LabVIEW: (Hex 0x8BBB001F) A path and URL are both specified.
|-
| [[Error Code -1950679008|-1950679008]]
| LabVIEW: (Hex 0x8BBB0020) Invalid value for the Enable Aliasing option.
|-
| [[Error Code -1950679007|-1950679007]]
| LabVIEW: (Hex 0x8BBB0021) A value is missing for the Enable Aliasing option.
|-
| [[Error Code -1950679006|-1950679006]]
| LabVIEW: (Hex 0x8BBB0022) Invalid value for Single Writer option.
|-
| [[Error Code -1950679005|-1950679005]]
| LabVIEW: (Hex 0x8BBB0023) You must select a name for the shared variable.
|-
| [[Error Code -1950679004|-1950679004]]
| LabVIEW: (Hex 0x8BBB0024) Two var type feature packs are selected
|-
| [[Error Code -1950679003|-1950679003]]
| LabVIEW: (Hex 0x8BBB0025) No var type feature pack is selected
|-
| [[Error Code -1950679002|-1950679002]]
| LabVIEW: (Hex 0x8BBB0026) Var type feature packs must be required
|-
| [[Error Code -1950679001|-1950679001]]
| LabVIEW: (Hex 0x8BBB0027) Buffer size must be greater than 1.
|-
| [[Error Code -1950679000|-1950679000]]
| LabVIEW: (Hex 0x8BBB0028) Array length must be greater than or equal to 2.
|-
| [[Error Code -1950678999|-1950678999]]
| LabVIEW: (Hex 0x8BBB0029) Data points in waveform must be greater than or equal to 1.
|-
| [[Error Code -1950678998|-1950678998]]
| LabVIEW: (Hex 0x8BBB002A) Global variables can only be accessed from the local machine.
|-
| [[Error Code -1950678997|-1950678997]]
| LabVIEW: (Hex 0x8BBB002B) You cannot use a Variable Node of this type on this target.
|-
| [[Error Code -1950678996|-1950678996]]
| LabVIEW: (Hex 0x8BBB002C) The variable configuration is invalid.  Edit the variable properties to correct the configuration.
|-
| [[Error Code -1950678995|-1950678995]]
| LabVIEW: (Hex 0x8BBB002D) Variable has undefined data type.
|-
| [[Error Code -1950678994|-1950678994]]
| LabVIEW: (Hex 0x8BBB002E) Variable has invalid data type.
|-
| [[Error Code -1950678993|-1950678993]]
| LabVIEW: (Hex 0x8BBB002F) The Raw Full Scale value must be greater than the Raw Zero Scale value.
|-
| [[Error Code -1950678992|-1950678992]]
| LabVIEW: (Hex 0x8BBB0030) The Raw Scale and/or Engineering Scale is invalid.
|-
| [[Error Code -1950678991|-1950678991]]
| LabVIEW: (Hex 0x8BBB0031) The Engineering Full Scale value should not be equal to Engineering Zero Scale value.
|-
| [[Error Code -1950678990|-1950678990]]
| LabVIEW: (Hex 0x8BBB0032) Scaling type attribute not specified.
|-
| [[Error Code -1950678989|-1950678989]]
| LabVIEW: (Hex 0x8BBB0033) Scaling ranges not fully specified.
|-
| [[Error Code -1950678988|-1950678988]]
| LabVIEW: (Hex 0x8BBB0034) The number of arrays, elements, and points per waveform must be greater than or equal to 1.
|-
| [[Error Code -1950678987|-1950678987]]
| LabVIEW: (Hex 0x8BBB0035) This piece of configuration does not exist for this type of variable.
|-
| [[Error Code -1950678986|-1950678986]]
| LabVIEW: (Hex 0x8BBB0036) Unspecified shared variable error.
|-
| [[Error Code -1950678985|-1950678985]]
| LabVIEW: (Hex 0x8BBB0037) Invalid variable name. The name of a variable cannot start with a single quote ('), start or end with a space, or contain a backslash, forward slash, or any of the following backslash '\' codes: \r \n \t \b \s.
|-
| [[Error Code -1950678984|-1950678984]]
| LabVIEW: (Hex 0x8BBB0038) Variable names can have a maximum of 255 characters.
|-
| [[Error Code -1950678983|-1950678983]]
| LabVIEW: (Hex 0x8BBB0039) The array sizes in the network buffer must be greater than or equal to the array sizes in the real-time FIFO buffer. The waveform sizes in the network buffer must be greater than or equal to the waveform sizes in the real-time FIFO buffer.
|-
| [[Error Code -1950678982|-1950678982]]
| LabVIEW: (Hex 0x8BBB003A) The shared variable client-side read buffer is full.
|-
| [[Error Code -1950678981|-1950678981]]
| LabVIEW: (Hex 0x8BBB003B) The shared variable client-side read buffer overflowed.
|-
| [[Error Code -1950678980|-1950678980]]
| LabVIEW: (Hex 0x8BBB003C) The shared variable server-side write buffer is full.
|-
| [[Error Code -1950678979|-1950678979]]
| LabVIEW: (Hex 0x8BBB003D) The shared variable server-side write buffer overflowed.
|-
| [[Error Code -1950678978|-1950678978]]
| LabVIEW: (Hex 0x8BBB003E) The project that contains the project library you want to add a shared variable to must be open.
|-
| [[Error Code -1950678977|-1950678977]]
| LabVIEW: (Hex 0x8BBB003F) Unable to deploy the library because the name is reserved. You cannot deploy a library named "System", "LV", or "FP". You also cannot deploy a library with a name that starts with "NI_".
|-
| [[Error Code -1950678976|-1950678976]]
| LabVIEW: (Hex 0x8BBB0040) Attempted to load, replace, or remove a configuration from a different source. Your configuration might conflict with the NI Scan Engine configuration.
|-
| [[Error Code -1950678975|-1950678975]]
| LabVIEW: (Hex 0x8BBB0041) Invalid Integer value.
|-
| [[Error Code -1950678974|-1950678974]]
| LabVIEW: (Hex 0x8BBB0042) Invalid Logging String Format
|-
| [[Error Code -1950678972|-1950678972]]
| LabVIEW: (Hex 0x8BBB0044) LabVIEW failed to load Logos.
|-
| [[Error Code -1950678971|-1950678971]]
| LabVIEW: (Hex 0x8BBB0045) LabVIEW could not resolve the machine alias for this Shared Variable and is using a cached IP Address instead.
|-
| [[Error Code -1950678970|-1950678970]]
| LabVIEW: (Hex 0x8BBB0046) Failed to load rtvarsup, which is required for Shared Variables with the Real-Time FIFO enabled.
|-
| [[Error Code -1950678969|-1950678969]]
| LabVIEW: (Hex 0x8BBB0047) Failed to load rtvarnet, which is required for Network-Published Shared Variables with the Real-Time FIFO enabled.
|-
| [[Error Code -1950678968|-1950678968]]
| LabVIEW: (Hex 0x8BBB0048) Failed to load nitaglv, which is required for Network-Published Shared Variables.
|-
| [[Error Code -1950678967|-1950678967]]
| LabVIEW: (Hex 0x8BBB0049) Aliasee is missing.
|-
| [[Error Code -1950678966|-1950678966]]
| LabVIEW: (Hex 0x8BBB004A) Cannot access I/O variables in Direct mode remotely.
|-
| [[Error Code -1950678965|-1950678965]]
| LabVIEW: (Hex 0x8BBB004B) The value read is of a data type that cannot be converted to the data type of this Shared Variable node.
|-
| [[Error Code -1950678964|-1950678964]]
| LabVIEW: (Hex 0x8BBB004C) Failed to load NI Scan Engine software required for I/O Variable access.  If you are hosting I/O variables on an RT target, ensure that the NI Scan Engine is installed on the RT target. If you are hosting I/O variables on Windows, you must install a Windows I/O driver, such as DeviceNet, that includes NI Scan Engine support. If you are hosting I/O variables in a Windows VI, the VI must be part of an open LabVIEW project. If you are hosting I/O variables in a Windows-built application, the application must be configured to include hardware configuration.
|-
| [[Error Code -1950678963|-1950678963]]
| LabVIEW: (Hex 0x8BBB004D) Unable to open the variable connection. A connection to the specified variable is already open using a different data type.
|-
| [[Error Code -1950678962|-1950678962]]
| LabVIEW: (Hex 0x8BBB004E) The specified variable does not support the specified read, write, or open operation.
|-
| [[Error Code -1950678961|-1950678961]]
| LabVIEW: (Hex 0x8BBB004F) The connection to the variable has been closed.
|-
| [[Error Code -1950678960|-1950678960]]
| LabVIEW: (Hex 0x8BBB0050) The specified variable connection is not configured to read timestamps.
|-
| [[Error Code -1950678959|-1950678959]]
| LabVIEW: (Hex 0x8BBB0051) The specified I/O Variable is configured with a timeout, but timeouts are not supported when accessing an I/O variable locally.
|-
| [[Error Code -1950678958|-1950678958]]
| LabVIEW: (Hex 0x8BBB0052) This property can be called only on an I/O alias.
|-
| [[Error Code -1950678957|-1950678957]]
| LabVIEW: (Hex 0x8BBB0053) This property can be called only on an I/O variable.
|-
| [[Error Code -1950678956|-1950678956]]
| LabVIEW: (Hex 0x8BBB0054) The property cannot be set when the variable is reserved.
|-
| [[Error Code -1950678955|-1950678955]]
| LabVIEW: (Hex 0x8BBB0055) Invalid URL. The URL cannot contain # or ? characters.
|-
| [[Error Code -1950678954|-1950678954]]
| LabVIEW: (Hex 0x8BBB0056) The string for the Variable Engine or protocol portion of the URL is invalid.
|-
| [[Error Code -1950678953|-1950678953]]
| LabVIEW: (Hex 0x8BBB0057) The URL is invalid.
|-
| [[Error Code -1950678952|-1950678952]]
| LabVIEW: (Hex 0x8BBB0058) The URL is invalid.  The URL contains the User Information subcomponent within the Authority which isn't supported by this scheme.  If you included the "@" character as part of the Authority and didn't intend for it to signify the User Information field, replace the "@" character with its percent encode UTF-8 equivalent form of "%40".
|-
| [[Error Code -1950678951|-1950678951]]
| LabVIEW: (Hex 0x8BBB0059) The host name specified in the URL is invalid.  It contains one or more of the characters ":/?#[]@" which are illegal to use in their decoded form.  If the host name contains one of these characters, replace it with its percent encoded UTF-8 equivalent form.  For example, to specify the host name "My Machine?" you must use the string "My Machine%3F".
|-
| [[Error Code -1950678950|-1950678950]]
| LabVIEW: (Hex 0x8BBB005A) The port specified in the Authority component of the URL is invalid.  The port must consist of only numeric characters.
|-
| [[Error Code -1950678949|-1950678949]]
| LabVIEW: (Hex 0x8BBB005B) The URL contains one or more unsupported path segments.  Path segments of the form "/./", "/../", and empty path segments "//" are not supported.
|-
| [[Error Code -1950678948|-1950678948]]
| LabVIEW: (Hex 0x8BBB005C) The path in the URL is invalid.
|-
| [[Error Code -1950678947|-1950678947]]
| LabVIEW: (Hex 0x8BBB005D) The specified URL is invalid.  The URL specifies a host name that includes a port.  However, ports are not supported by the specified variable engine.
|-
| [[Error Code -1950678946|-1950678946]]
| LabVIEW: (Hex 0x8BBB005E) The specified URL contains a relative path reference, but LabVIEW does not support relative paths in Variable URLs. To correct the problem, use absolute path references instead of relative references. Variable URLs must take one of the following three forms: (1) [Variable Engine]://[Host Name]/[Container Name]/[Variable Name] or (2) //[Host Name]/[Container Name]/[Variable Name] or (3) /[Container Name]/[Variable Name].
|-
| [[Error Code -1950678945|-1950678945]]
| LabVIEW: (Hex 0x8BBB005F) The host name specified in the variable identifier URL does not correspond to the local host, but the specified variable engine URL only supports an operation on the local host. You cannot perform the specified operation on a remotely hosted variable or stream endpoint. Use the PSP Variable Engine URL (ni.var.psp) to read or write a network-published I/O variable or I/O alias remotely.
|-
| [[Error Code -1950678944|-1950678944]]
| LabVIEW: (Hex 0x8BBB0060) The Class Identifier property of the variable object specified in the variable identifier URL is incompatible with the refnum configuration. The class of the variable object is not equivalent to or does not derive from the class you configured for the refnum. This error might occur if you try to reference a Variable object, but the specified variable identifier URL does not reference a Variable.
|-
| [[Error Code -1950678943|-1950678943]]
| LabVIEW: (Hex 0x8BBB0061) Timed out while attempting to open a connection to the variable.
|-
| [[Error Code -1950678942|-1950678942]]
| LabVIEW: (Hex 0x8BBB0062) Scaling coerce attribute not specified.
|-
| [[Error Code -1950678941|-1950678941]]
| LabVIEW: (Hex 0x8BBB0063) An empty string is not a valid URL.  If you want to reference the root container within a variable engine, you need to specify the path explicitly using one of the following URL formats: "[Variable Engine]://[Host Name]", "[Variable Engine]:", or "/".
|-
| [[Error Code -1950678940|-1950678940]]
| LabVIEW: (Hex 0x8BBB0064) The remote configuration web service is not installed on the host specified in the URL.
|-
| [[Error Code -1950678939|-1950678939]]
| LabVIEW: (Hex 0x8BBB0065) The version of the remote configuration web service installed on the host specified in the URL is not compatible with this version of LabVIEW.
|-
| [[Error Code -1950678938|-1950678938]]
| LabVIEW: (Hex 0x8BBB0066) The NI Vision software is not installed.  This datatype can only be used when NI Vision is installed.
|-
| [[Error Code -1950678937|-1950678937]]
| LabVIEW: (Hex 0x8BBB0067) An attempt was made to read or write a property that is only valid for readable variable objects.
|-
| [[Error Code -1950678936|-1950678936]]
| LabVIEW: (Hex 0x8BBB0068) The specified buffer size is invalid.  Valid values are zero and sizes greater than two.  A buffer size of zero will disable buffering and cause the connection to maintain only the latest value.
|-
| [[Error Code -1950678935|-1950678935]]
| LabVIEW: (Hex 0x8BBB0069) The scheme specified in the URL is not supported.
|-
| [[Error Code -1950678934|-1950678934]]
| LabVIEW: (Hex 0x8BBB006A) Requires an open variable connection to read or write the specified property.
|}
|}
More to Come
More to Come

Revision as of 01:50, 17 September 2021

This article is a stub. You can help LabVIEW Wiki by expanding it.
Please improve this article if you can.

Below is a list of every Error Code built into the LabVIEW IDE. This list might not be complete. Clicking on the Error Codes with an attached page will have more information about the error. (If pages exist the link appears blue. If a page does not exist the page appears red.)

Code Message
-2147483638 LabVIEW: (Hex 0x8000000A) The data necessary to complete this operation is not yet available.
-2147467263 LabVIEW: (Hex 0x80004001) Not implemented.

=========================

NI System Configuration: This operation is not implemented for this target or resource.

-2147467262 LabVIEW: (Hex 0x80004002) No such interface supported.
-2147467261 LabVIEW: (Hex 0x80004003) Invalid pointer.

=========================

NI System Configuration: A required pointer parameter was NULL.

-2147467260 LabVIEW: (Hex 0x80004004) Operation aborted.
-2147467259 LabVIEW: (Hex 0x80004005) Unspecified error.

=========================

NI System Configuration: Miscellaneous operation failure.

-2147418113 LabVIEW: (Hex 0x8000FFFF) Catastrophic failure.

=========================

NI System Configuration: A critical unexpected error occurred. Please report this error to NI.

-2147220735 MAX: (Hex 0x80040301) Internal error: The specified class could not be found in the configuration database. Your installation may need to be repaired.
-2147220733 MAX: (Hex 0x80040303) Internal error: The requested object was not found in the configuration database. Please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
-2147220731 MAX: (Hex 0x80040305) Internal error: The attribute does not exist on the class or object. Please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
-2147220730 MAX: (Hex 0x80040306) Internal error: The requested attribute change does not match the type of the attribute. Please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
-2147220727 MAX: (Hex 0x80040309) The client process cannot communicate with the configuration server process. If this problem persists, please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
-2147220725 MAX: (Hex 0x8004030B) Internal error: A client attempted to modify an object that is static or constant or tried to modify a class. Please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
-2147220724 MAX: (Hex 0x8004030C) Internal error: An expected interface was not implemented or was called into incorrectly. Please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
-2147220723 MAX: (Hex 0x8004030D) The specified configuration file is not writeable by the current user. Please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
-2147220721 MAX: (Hex 0x8004030F) The configuration database cannot be opened, possibly due to corruption. Please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
-2147220719 MAX: (Hex 0x80040311) The client process has been disconnected from the configuration server. If this problem persists, please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
-2147220717 MAX: (Hex 0x80040313) The Remote Procedure Call connecting the client to the configuration server failed to be initialized. Your installation may need to be repaired.
-2147220712 MAX: (Hex 0x80040318) Internal error: The client has failed to connect to the configuration server, possibly because the server is too busy or has run into a communication error. Please note the steps you performed that led to this error and contact technical support.
-2147220705 MAX: (Hex 0x8004031F) Internal error: The client failed to reconnect to the remote system. Rebooting the remote system may fix this problem.
-2147220704 MAX: (Hex 0x80040320) Internal error: An unexpected error occurred with the configuration. Please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
-2147220701 MAX: (Hex 0x80040323) Failed to reconnect to the remote system because it appears to be a different one than the one originally connected to. To fix this issue, exit and restart the application.
-2147220699 MAX: (Hex 0x80040325) Failed to load Remote Procedure Call library. Your installation may need to be repaired.
-2147220698 MAX: (Hex 0x80040326) Failed to find Remote Procedure Call library's GUID function. Your installation may need to be repaired.
-2147220697 MAX: (Hex 0x80040327) The string is too long for the export operation to handle.
-2147220695 MAX: (Hex 0x80040329) The system does not have enough free disk space to write to the configuration database. Please free up some disk space and retry the operation.
-2147220694 MAX: (Hex 0x8004032A) Unable to access the configuration database because an incompatible data dictionary has been detected. This error may have been caused by a recently installed component. Note the steps you performed that led to this error and contact technical support at http://ni.com/support.
-2147220693 MAX: (Hex 0x8004032B) The configuration database is not running. Restart your system and try again. Visit ni.com/info and enter the Info Code MAXStoppedServiceError if the problem persists.
-2147220692 MAX: (Hex 0x8004032C) The configuration database exited abnormally. Visit ni.com/info and enter the Info Code MAXTerminatedServiceError if the problem persists.
-2147220691 MAX: (Hex 0x8004032D) The operation timed out while waiting on the configuration database to start. Visit ni.com/info and enter the Info Code MAXServiceNotStartingError if the problem persists.
-2147220690 MAX: (Hex 0x8004032E) The configuration database is not installed on the system. Visit ni.com/info and enter the Info Code MAXServiceNotInstalledError for more information.
-2147220689 MAX: (Hex 0x8004032F) The configuration database encountered an unexpected error. Visit ni.com/info and enter the Info Code MAXSvcLocError for more information.
-2147220688 MAX: (Hex 0x80040330) The configuration database timed out while waiting on a driver. Visit ni.com/info and enter the Info Code MAXGeneralTimeoutError if the problem persists.
-2147220624 NI System Configuration: The property already exists with a different type or value.
-2147220623 NI System Configuration: The property does not exist for this resource.
-2147220622 NI System Configuration: The name of the target or expert contains illegal characters or has an invalid format. Each label of the hostname must be between 1 and 63 characters long, and the entire hostname, including delimiting dots, must be 255 characters or less.
-2147220621 NI System Configuration: Could not contact the System Configuration API at the specified target address. Ensure that the system is online.
-2147220620 NI System Configuration: A specified expert is not installed.
-2147220619 NI System Configuration: The specified resource name does not exist.
-2147220618 NI System Configuration: The specified mode is invalid.
-2147220617 NI System Configuration: The value 'allowAsyncNotification' is TRUE and the attribute is not ready.
-2147220616 NI System Configuration: The NI System Configuration API is not installed at the specified target.
-2147220615 NI System Configuration: You cannot install more than one callback handler per framework instance.
-2147220614 NI System Configuration: The suggested name contains illegal characters.
-2147220613 NI System Configuration: Another resource already has the suggested name.
-2147220612 NI System Configuration: None of the changed properties can be validated.
-2147220611 NI System Configuration: The current user does not have permission for the requested operation.
-2147220610 NI System Configuration: The resource being renamed has dependencies, and the 'updateDependencies' flag was false.
-2147220609 NI System Configuration: A property contained a value that is not valid or is out of range.
-2147220608 NI System Configuration: Multiple properties contained values that are inconsistent with each other.
-2147220607 NI System Configuration: The operation was canceled.
-2147220606 NI System Configuration: Could not parse the response from the NI System Configuration API at the specified target address.
-2147220605 NI System Configuration: The resource name is valid but the operation requires the resource to be present.
-2147220604 NI System Configuration: The resource name is valid but the operation is not supported on simulated resources.
-2147220603 NI System Configuration: The resource requires being in the firmware update state to perform this operation.
-2147220602 NI System Configuration: The uploaded firmware image does not work with this resource.
-2147220601 NI System Configuration: The uploaded firmware image is corrupt or incomplete.
-2147220600 NI System Configuration: The specified firmware version does not exist.
-2147220599 NI System Configuration: The specified firmware version is older than what is currently installed.
-2147220598 NI System Configuration: The username or password is incorrect.
-2147220597 NI System Configuration: The specified firmware was not successfully installed. See the output parameters for more information.
-2147220596 NI System Configuration: The data could not be encrypted.
-2147220595 NI System Configuration: The changes were not saved. Some of the modified properties were not validated because they do not apply to this item.
-2147220594 NI System Configuration: The calibration password is incorrect.
-2147220593 NI System Configuration: Could not delete the specified resource because it is present.
-2147220592 NI System Configuration: Failed transmitting data to or from the web server at the specified target address.
-2147220591 NI System Configuration: The NI System Configuration API at the specified target address could not decrypt the data.
-2147220590 NI System Configuration: The specified firmware requires a newer version of the expert than what is currently installed.
-2147220589 NI System Configuration: There was uncertainty regarding what action to take during an import.
-2147220588 NI System Configuration: A required item could not be imported.
-2147220587 NI System Configuration: Could not perform the specified operation because the item is currently in use.
-2147220586 NI System Configuration: Could not perform the specified operation because the item type is unknown or not supported.
-2147220560 NI System Configuration: Unable to write to file or folder. Permission denied.
-2147220559 NI System Configuration: Unable to connect to the specified system. Ensure that the system is online.
-2147220558 NI System Configuration: Error running transform to generate report
-2147220557 NI System Configuration: Unable to find NI MAX on the system. Please reinstall.
-2147220556 NI System Configuration: Unexpected error launching nimax.exe
-2147220555 NI System Configuration: Launched nimax.exe but it did not complete in a reasonable time.
-2147220554 NI System Configuration: Unable to find XSL transform to generate report
-2147220553 NI System Configuration: Incorrect report file extension provided
-2147220552 NI System Configuration: Report file is read-only. Unable to generate report.
-2147220551 NI System Configuration: Report file exists and the NIMAX_FailIfOverwritingReport flag was set
-2147220550 NI System Configuration: Error creating directory for report files
-2147220480 NI System Configuration: Error opening a file
-2147220479 NI System Configuration: The object cannot be accessed because of insufficient permissions
-2147220478 NI System Configuration: Error with the object copier
-2147220477 NI System Configuration: Error performing a file operation
-2147220476 NI System Configuration: Names from one expert have collided with another expert
-2147220475 NI System Configuration: Unexpected error has occurred
-2147220474 NI System Configuration: The expert requested its stream for import but one does not exist because it did not export a stream.
-2147220473 NI System Configuration: Error compressing or decompressing file
-2147220472 NI System Configuration: Error reading from a stream
-2147220471 NI System Configuration: Error writing to a stream
-2147220470 NI System Configuration: Error seeking to a position in a stream
-2147220469 NI System Configuration: Repository not ready to be exported
-2147220468 NI System Configuration: The file or stream chosen to import the repository from is not a valid repository
-2147220467 NI System Configuration: The repository was exported with a newer version of MAX than what is on the importing machine
-2147220466 NI System Configuration: The import storage could not be opened
-2147220465 NI System Configuration: The export storage could not be created
-2147220464 NI System Configuration: The object copier could not be created
-2147220463 NI System Configuration: A copy operation is already in progress
-2147220462 NI System Configuration: The custom file does not belong to a given expert
-2147220461 NI System Configuration: A specified system is not supported by this expert.
-2147220460 NI System Configuration: A specified system is presumably supported, but network errors prevent connection.
-2147220459 NI System Configuration: The product is not installed on the specified system.
-2147220458 NI System Configuration: The product is installed on the remote system, but is too old
-2147220457 NI System Configuration: The product is installed on the remote system, but is too new
-2147220456 NI System Configuration: The import data is too old. The product is not backward-compatible with this data.
-2147220455 NI System Configuration: The import data is too new. The product is not forward-compatible with this data.
-2147220454 NI System Configuration: The operation failed because no source items were specified
-2147220453 NI System Configuration: The operation failed because some items were orphans
-2147220452 NI System Configuration: The operation failed because some items were in-edit and not saved
-2147220451 NI System Configuration: The operation failed because it would overwrite a file
-2147220450 NI System Configuration: The operation failed because it would overwrite items.
-2147220449 NI System Configuration: The operation failed because of missing dependency items.
-2147220448 NI System Configuration: The operation timed out.
-2147220447 NI System Configuration: The operation was canceled by the client
-2147220446 NI System Configuration: The operation failed because of warning conflicts
-2147220445 NI System Configuration: The operation failed because of general conflicts.
-2147220444 NI System Configuration: The operation failed because of unresolved conflicts requiring user input
-2147220443 NI System Configuration: An expert is not ready to accept the specified source or destination, but may become ready in the future
-2147220442 NI System Configuration: The operation failed because some files were orphans
-2147220441 NI System Configuration: Caller called a non-const method on an object that is logically const
-2147220440 NI System Configuration: A product does not support the attempted copy mode (e.g. merge to file, etc)
-2147220388 NI System Configuration: The image you are applying is not supported by the boot flow installed on the target. Boot flow migration is not supported when running locally.
-2147220387 NI System Configuration: The image you are applying is not supported by the boot flow installed on the target. Make sure the target has access to ni.com or install boot flow migration support packages on the host.
-2147220386 NI System Configuration: You must allow the target to reboot to perform the specified operation.
-2147220385 NI System Configuration: The target requires newer functionality not supported by the software on your computer. Update NI System Configuration to the latest version to configure this target. See www.ni.com/r/rtconfigerror for more information.
-2147220384 NI System Configuration: Running 'opkg update' failed to access at least one enabled feed. Consider disabling unnecessary feeds.
-2147220383 NI System Configuration: The specified software feed was not found.
-2147220382 NI System Configuration: Could not add the specified software feed because it already exists.
-2147220381 NI System Configuration: The target does not support one of the specified installation options.
-2147220380 NI System Configuration: The target does not include the functionality this operation requires. Update the firmware to the latest version.
-2147220379 NI System Configuration: The target does not include the functionality this operation requires. Update the software to the latest version.
-2147220378 NI System Configuration: SSH must be enabled on the target.
-2147220377 NI System Configuration: Could not parse the response from opkg at the specified target address.
-2147220376 NI System Configuration: The specified software set is the wrong type for this operation.
-2147220375 NI System Configuration: The target requires using opkg to modify installed software.
-2147220374 NI System Configuration: Disk encryption is not supported by the target.
-2147220373 NI System Configuration: Could not find a device suitable for storing the encrypted disk recovery key. Format a USB drive with the appropriate filesystem label and insert it into the target.
-2147220372 NI System Configuration: To restart your system, either specify 'localhost' on the front panel for Session in, or call Initialize Session first.
-2147220371 NI System Configuration: The image is corrupt or the file type is invalid.
-2147220370 NI System Configuration: Can only perform this action in safe or install mode, and the 'auto restart' flag was false.
-2147220369 NI System Configuration: The encryption passphrase when applying an image was not the same as when the image was created.
-2147220368 NI System Configuration: The IP address is invalid.
-2147220367 NI System Configuration: The gateway address is invalid.
-2147220366 NI System Configuration: The DNS server address is invalid.
-2147220365 NI System Configuration: The subnet mask is invalid.
-2147220364 NI System Configuration: Command is not supported by given protocol.
-2147220363 NI System Configuration: Remote system replied with failure to config command.
-2147220362 NI System Configuration: The remote system is locked. A password is required to configure.
-2147220361 NI System Configuration: Password supplied for operation is invalid.
-2147220360 NI System Configuration: The remote device is not configurable for some reason other than password.
-2147220359 NI System Configuration: Failed to unlock the system.
-2147220358 NI System Configuration: Failed to lock the system.
-2147220357 NI System Configuration: General installation failure.
-2147220356 NI System Configuration: Installation files were corrupt or not found in the repository.
-2147220355 NI System Configuration: The installation file is empty.
-2147220354 NI System Configuration: The system must have a valid IP address before certain operations such as installation. The IP address cannot be 0.0.0.0.
-2147220352 NI System Configuration: General install error.
-2147220350 NI System Configuration: Installation to the specified target has already begun. Multiple installations are not allowed at the same time.
-2147220349 NI System Configuration: Remote action aborted.
-2147220338 NI System Configuration: Hard drive on the remote system is either full or encountered an I/O error.
-2147220337 NI System Configuration: Hard drive format failed. The disk on the target may be unrecoverable.
-2147220336 NI System Configuration: System must be in safe mode before attempting a hard drive format. Restart the target into safe mode and attempt the command again.
-2147220335 NI System Configuration: System failed to restart after the hard drive was formatted. The system is in an unknown state. You may have to manually restart the target.
-2147220334 NI System Configuration: The server refused the network connection.
-2147220331 NI System Configuration: Failed to get one or more files while creating system image. The image is incomplete or invalid.
-2147220330 NI System Configuration: Failed to put one or more files while applying system image. The system may be in a corrupt state.
-2147220329 NI System Configuration: The specified path does not contain a valid image.
-2147220328 NI System Configuration: The image is for a different device class and is incompatible with the target.
-2147220327 NI System Configuration: The image was not created from the specified target.
-2147220326 NI System Configuration: The requested file system is not supported on the specified target.
-2147220325 NI System Configuration: The specified target does not support custom software installations.
-2147220324 NI System Configuration: A file transfer error (FTP or WebDAV) occurred.
-2147220323 NI System Configuration: Operation timed out.
-2147220322 NI System Configuration: The specified file was not found.
-2147220321 NI System Configuration: The specified directory was not found.
-2147220320 NI System Configuration: The specified file or directory path was not found.
-2147220319 NI System Configuration: No software is available for installation to this target.
-2147220318 NI System Configuration: The file or directory exists and the overwrite flag was false.
-2147220317 NI System Configuration: The target was not formatted because the option to keep configuration after a format is supported only for targets on the local subnet. To format the target, repeat the operation without requesting to keep the configuration.
-2147220316 NI System Configuration: Filename or pathname is longer than what the server supports.
-2147220315 NI System Configuration: Failed when communicating with the system. This issue is usually caused by a high latency in the network. Refer to KnowledgeBase article 42GH3O00 on ni.com for possible solutions.
-2147220314 NI System Configuration: The operation failed because of insufficient permissions.
-2147220313 NI System Configuration: The operation failed because the path already exists.
-2147220312 NI System Configuration: The execution of an external command, script, or application failed.
-2147220311 NI System Configuration: Failed to download the file from the 'RT Images' repository.
-2147220309 NI System Configuration: Failure to send command.
-2147220308 NI System Configuration: Could not contact remote target. Ensure that the system is online.
-2147220307 NI System Configuration: Could not access network.
-2147220306 NI System Configuration: Command was not confirmed, result of operation is uncertain.
-2147220305 NI System Configuration: Hostname could not be resolved by DNS.
-2147220304 NI System Configuration: Timeout while waiting for restart. The system is offline.
-2147220303 NI System Configuration: The sending new configuration operation returned a failure. However, the operation might not have failed.
-2147220300 NI System Configuration: Cannot install more than one startup component.
-2147220299 NI System Configuration: Invalid argument.
-2147220298 NI System Configuration: Cannot uninstall a specified software component from the target because there are dependencies.
-2147220297 NI System Configuration: Cannot install multiple packages of the same component.
-2147220296 NI System Configuration: Cannot install a specified software component to the target because there are dependencies.
-2147220295 NI System Configuration: A specified software component is incompatible with this target.
-2147220294 NI System Configuration: A specified software component is incompatible with this target's operating system.
-2147220293 NI System Configuration: A firmware update is required before installing.
-2147220292 NI System Configuration: Cannot open file or folder.
-2147220291 NI System Configuration: Duplicate or missing components on target installation.
-2147220290 NI System Configuration: Buffer overflow, size is too small.
-2147220289 NI System Configuration: The software installed on the target uses a CDF format not supported by the software on your computer. Update NI System Configuration or NI MAX to the latest version to configure this target.
-2147220288 NI System Configuration: The specified software set or base system image cannot be installed to the target because it is invalid or cannot be found.
-2147220287 NI System Configuration: The specified software set definition is incomplete and cannot be installed to the target. Some hidden dependencies were added.
-2147220286 NI System Configuration: One or more software set items could not be found in the repository.
-2147220285 NI System Configuration: There is a top-level hidden component installed.
-2147220284 NI System Configuration: A component was passed in that is not an installable add-on. It may be an unknown ID, a defined item that is not an add-on, a missing add-on, or a non-installable add-on.
-2147220283 NI System Configuration: Could not find the 'RT Images' repository location.
-2147220282 NI System Configuration: Could not read the 'RT Images' registry key.
-2147220281 NI System Configuration: Could not find the rts2cdf conversion utility.
-2147220280 NI System Configuration: The operating system is not supported.
-2147220279 NI System Configuration: Unspecified version while trying to install exact version of a component.
-2147220278 NI System Configuration: Unsupported MAC address format. Supply the MAC address as a colon separated string of characters instead of Hex display.
-2147220277 NI System Configuration: A component was passed in that is not a startup.
-2147024891 LabVIEW: (Hex 0x80070005) Access denied. This error can occur if you attempt to write a single writer shared variable that is already connected to a subscriber with write access. Ensure that you connect only one target with write access to this shared variable at a time.
-2147024890 LabVIEW: (Hex 0x80070006) Invalid handle.
-2147024882 LabVIEW: (Hex 0x8007000E) Ran out of memory.

=========================

NI System Configuration: Out of memory.

-2147024809 LabVIEW: (Hex 0x80070057) One or more arguments are invalid.

=========================

NI System Configuration: Invalid parameter.

-2132869120 LabVIEW: (Hex 0x80DF0000) The assembly you are deploying is bad.
-2132869119 LabVIEW: (Hex 0x80DF0001) The assembly handler does not support the sent command.
-2132869118 LabVIEW: (Hex 0x80DF0002) A file I/O error occurred.
-2132869117 LabVIEW: (Hex 0x80DF0003) The resource you are deploying is bad.
-2132869116 LabVIEW: (Hex 0x80DF0004) The item cannot read the assembly.
-2132869115 LabVIEW: (Hex 0x80DF0005) The item cannot create the assembly handler.
-2132869114 LabVIEW: (Hex 0x80DF0006) A module cannot load.
-2132869113 LabVIEW: (Hex 0x80DF0007) The item encountered an invalid pointer argument.
-2132869112 LabVIEW: (Hex 0x80DF0008) The item cannot be found.
-2132869111 LabVIEW: (Hex 0x80DF0009) The item is out of memory.
-2132869110 LabVIEW: (Hex 0x80DF000A) A communication error between the host and target occurred.
-2132869109 LabVIEW: (Hex 0x80DF000B) The system is in a bad state.
-2132869108 LabVIEW: (Hex 0x80DF000C) The deploy header is bad.
-2132869107 LabVIEW: (Hex 0x80DF000D) An unknown error occurred during deployment.
-2132869106 LabVIEW: (Hex 0x80DF000E) An XML parsing error occurred.
-2132869105 LabVIEW: (Hex 0x80DF000F) The deployment command failed.
-2132869104 LabVIEW: (Hex 0x80DF0010) The current deployment operation has a missing dependency.
-2132869103 LabVIEW: (Hex 0x80DF0011) The item encountered an invalid argument.
-2132869102 LabVIEW: (Hex 0x80DF0012) The specified file cannot be found.
-2132869101 LabVIEW: (Hex 0x80DF0013) The deployment operation caused a rollback operation, and the rollback operation failed.
-2132869100 LabVIEW: (Hex 0x80DF0014) Logging an entry to the rollback log causes an error.
-2132869099 LabVIEW: (Hex 0x80DF0015) A deployment transaction is in progress.
-2132869098 LabVIEW: (Hex 0x80DF0016) A deployment transaction has not started.
-2132869096 LabVIEW: (Hex 0x80DF0018) The deployment operation causes a rollback operation.
-2132869095 LabVIEW: (Hex 0x80DF0019) The deployment connection timed out.
-2132869094 LabVIEW: (Hex 0x80DF001A) The current transaction has no items to process.
-2132869093 LabVIEW: (Hex 0x80DF001B) The current state does not allow the deployment operation.
-2132869092 LabVIEW: (Hex 0x80DF001C) No items are left to deploy.
-2132869091 LabVIEW: (Hex 0x80DF001D) No items are left to undeploy.
-2132869090 LabVIEW: (Hex 0x80DF001E) The deployment plug-in for this item cannot be found. Verify the proper software is installed.
-2132869089 LabVIEW: (Hex 0x80DF001F) An instance of the target-side deployment endpoint already exists.
-2132869088 LabVIEW: (Hex 0x80DF0020) This item cannot upload because another item with the same name exists in the project.
-2067353911 LabVIEW: (Hex 0x84C6AEC9) The data type of a process variable in the EPICS Client I/O server does not match the data type of the corresponding process variable in the IOC.
-2067353910 LabVIEW: (Hex 0x84C6AECA) The connection to the IOC was lost due to a network failure or an IOC error.
-2067353909 LabVIEW: (Hex 0x84C6AECB) The EPICS Server I/O Server cannot be deployed because one or more PV source variables do not exist. Open the configuration dialog to check and correct broken source variables.
-2000000013 LabVIEW: (Hex 0x88CA6BF3) Input Sprockets Failure. The Mac Input Sprockets Toolkit is not properly installed on the machine.
-2000000012 LabVIEW: (Hex 0x88CA6BF4) Close failure. Make sure the device is currently open.
-2000000011 LabVIEW: (Hex 0x88CA6BF5) Read failure. Failed to read the device.
-2000000010 LabVIEW: (Hex 0x88CA6BF6) The device ID being passed in is incorrect. Please connect the device ID parameter from the Initialize VI to the input parameter of the Close Input Device VI.
-2000000009 LabVIEW: (Hex 0x88CA6BF7) The operation cannot be performed while the device is being acquired.
-2000000008 LabVIEW: (Hex 0x88CA6BF8) Invalid device index. Please check to see if the device is attached correctly. Please verify that the device index you passed in to the Initialize Device VI is correct.
-2000000007 LabVIEW: (Hex 0x88CA6BF9) Data is not yet available.
-2000000006 LabVIEW: (Hex 0x88CA6BFA) The operation cannot be performed unless the device is acquired.
-2000000005 LabVIEW: (Hex 0x88CA6BFB) Access to the input device has been lost. You must reacquire access to the input device.
-2000000004 LabVIEW: (Hex 0x88CA6BFC) This object has not been initialized.
-2000000003 LabVIEW: (Hex 0x88CA6BFD) The DirectInput subsystem could not allocate sufficient memory to complete the call. This value is equal to the E_OUTOFMEMORY standard COM return value.
-2000000002 LabVIEW: (Hex 0x88CA6BFE) The application requires a newer version of DirectInput.
-2000000001 LabVIEW: (Hex 0x88CA6BFF) An invalid parameter was passed to the returning function, or the object was not in a state that permitted the function to be called. This value is equal to the E_INVALIDARG standard COM return value.
-2000000000 LabVIEW: (Hex 0x88CA6C00) The application was written for an unsupported prerelease version of DirectInput.
-1967390719 LabVIEW: (Hex 0x8ABC0001) Packet is too short or too long.
-1967390717 LabVIEW: (Hex 0x8ABC0003) Command not allowed in this particular context.
-1967390716 LabVIEW: (Hex 0x8ABC0004) Duplicate item already exists.
-1967390715 LabVIEW: (Hex 0x8ABC0005) Item not found.
-1967390714 LabVIEW: (Hex 0x8ABC0006) Interface object not valid.
-1967390713 LabVIEW: (Hex 0x8ABC0007) Target of Modify() already has an input connection.
-1967390712 LabVIEW: (Hex 0x8ABC0008) Cannot resolve name to a network address.
-1967390711 LabVIEW: (Hex 0x8ABC0009) Network operation timed out.
-1967390704 LabVIEW: (Hex 0x8ABC0010) Socket has been disconnected by its peer.
-1967390703 LabVIEW: (Hex 0x8ABC0011) Could not resolve service to a port address.
-1967390702 LabVIEW: (Hex 0x8ABC0012) Timed out while trying to connect to peer.
-1967390701 LabVIEW: (Hex 0x8ABC0013) Socket startup (WSAStartup) failed.
-1967390687 LabVIEW: (Hex 0x8ABC0021) The URL is to short to contain the minimum amount of information or the pointer is invalid.
-1967390686 LabVIEW: (Hex 0x8ABC0022) Computer name is not present in the URL.
-1967390685 LabVIEW: (Hex 0x8ABC0023) Computer name starts with a non-alphabetic character.
-1967390684 LabVIEW: (Hex 0x8ABC0024) Computer name contains an invalid character.
-1967390683 LabVIEW: (Hex 0x8ABC0025) Process name is not present in the URL.
-1967390682 LabVIEW: (Hex 0x8ABC0026) Process name contains an invalid character.
-1967390681 LabVIEW: (Hex 0x8ABC0027) Point or tag name is not present in the URL.
-1967390680 LabVIEW: (Hex 0x8ABC0028) Point or tag name contains an invalid character.
-1967390679 LabVIEW: (Hex 0x8ABC0029) URL is not properly formatted: not enough '\' characters at the beginning.
-1967390672 LabVIEW: (Hex 0x8ABC0030) Empty component in point or tag name.
-1967390671 LabVIEW: (Hex 0x8ABC0031) Invalid update rate.
-1967390670 LabVIEW: (Hex 0x8ABC0032) Invalid deadband.
-1967390669 LabVIEW: (Hex 0x8ABC0033) Key conflict for map collection on insert.
-1967390668 LabVIEW: (Hex 0x8ABC0034) Thread initiation failed.
-1967390667 LabVIEW: (Hex 0x8ABC0035) Process manager server is down.
-1967390666 LabVIEW: (Hex 0x8ABC0036) Time stamp at RealTimeTQ not ready.
-1967390655 LabVIEW: (Hex 0x8ABC0041) Object environment server has already shut down.
-1967390638 LabVIEW: (Hex 0x8ABC0052) Item not found.
-1967390623 LabVIEW: (Hex 0x8ABC0061) Attempted to resolve an incomplete URL.
-1967390622 LabVIEW: (Hex 0x8ABC0062) Attempted to resolve an unrecognized URL type.
-1967390621 LabVIEW: (Hex 0x8ABC0063) Process server has already shut down.
-1967390620 LabVIEW: (Hex 0x8ABC0064) Access request denied.
-1967390591 LabVIEW: (Hex 0x8ABC0081) Unable to resolve the host name.
-1967390590 LabVIEW: (Hex 0x8ABC0082) Unable to resolve the IP address returned from gethostbyname().
-1967390575 LabVIEW: (Hex 0x8ABC0091) Unrecognized attribute name.
-1967390574 LabVIEW: (Hex 0x8ABC0092) Invalid attribute value.
-1967390573 LabVIEW: (Hex 0x8ABC0093) Failed to get or set attribute.
-1967390464 LabVIEW: (Hex 0x8ABC0100) URL does not start with two slashes.
-1967390463 LabVIEW: (Hex 0x8ABC0101) URL starts with more than two slashes.
-1967390462 LabVIEW: (Hex 0x8ABC0102) URL contains two consecutive delimiters.
-1967390461 LabVIEW: (Hex 0x8ABC0103) URL contains a bad machine name.
-1967390460 LabVIEW: (Hex 0x8ABC0104) Unbalanced quotation marks in URL.
-1967370240 OS and Network Services: (Hex 0x8ABC5000) Internal Networking Error
-1967370239 OS and Network Services: (Hex 0x8ABC5001) Out of memory error when executing the requested network operation.
-1967370238 OS and Network Services: (Hex 0x8ABC5002) The application has exceeded the number of available PSP subscription handles
-1967370237 OS and Network Services: (Hex 0x8ABC5003) The connection to the server has been lost
-1967370236 OS and Network Services: (Hex 0x8ABC5004) The network transmit buffer is full.
-1967370235 OS and Network Services: (Hex 0x8ABC5005) The requested operation was not supported by the server.
-1967370234 OS and Network Services: (Hex 0x8ABC5006) The server was unable to bind a TCP port.
-1967370233 OS and Network Services: (Hex 0x8ABC5007) Operation failed because the network layer is in the process of shutting down.
-1967370232 OS and Network Services: (Hex 0x8ABC5008) The network layer was unable to schedule an asynchronous operation
-1967370231 OS and Network Services: (Hex 0x8ABC5009) The server does not support the requested data format.
-1967370224 OS and Network Services: (Hex 0x8ABC5010) Service registration failed. A service with the given name has already been registered.
-1967362047 OS and Network Services: (Hex 0x8ABC7001) Installed library is the wrong version.
-1967362046 OS and Network Services: (Hex 0x8ABC7002) Client attempted to call a function on an unregistered library.
-1967362045 OS and Network Services: (Hex 0x8ABC7003) Operation timed out.
-1967362044 OS and Network Services: (Hex 0x8ABC7004) Syntax error.
-1967362043 OS and Network Services: (Hex 0x8ABC7005) Stack overflowed.
-1967362042 OS and Network Services: (Hex 0x8ABC7006) Unable to start service.
-1967362041 OS and Network Services: (Hex 0x8ABC7007) Out of range.
-1967362040 OS and Network Services: (Hex 0x8ABC7008) Object not found.
-1967362039 OS and Network Services: (Hex 0x8ABC7009) Object already exists.
-1967362038 OS and Network Services: (Hex 0x8ABC700A) Object not found. Please check the if the specificied name or URL exists for the object, which could be a computer, process, shared variable, Citadel database, or NI domain.
-1967362037 OS and Network Services: (Hex 0x8ABC700B) Object or collection is not empty.
-1967362036 OS and Network Services: (Hex 0x8ABC700C) Client attempted to call a registration function more than once.
-1967362035 OS and Network Services: (Hex 0x8ABC700D) Invalid result type.
-1967362034 OS and Network Services: (Hex 0x8ABC700E) Invalid operation.
-1967362033 OS and Network Services: (Hex 0x8ABC700F) Invalid argument(s).
-1967362032 OS and Network Services: (Hex 0x8ABC7010) Initialization failed.
-1967362031 OS and Network Services: (Hex 0x8ABC7011) Write file operation failed.
-1967362030 OS and Network Services: (Hex 0x8ABC7012) Read file operation failed.
-1967362029 OS and Network Services: (Hex 0x8ABC7013) End of file.
-1967362028 OS and Network Services: (Hex 0x8ABC7014) Failed to de-serialize.
-1967362027 OS and Network Services: (Hex 0x8ABC7015) Unable to complete request. Connection failed.
-1967362026 OS and Network Services: (Hex 0x8ABC7016) Operation cancelled.
-1967362025 OS and Network Services: (Hex 0x8ABC7017) Buffer overflowed.
-1967362024 OS and Network Services: (Hex 0x8ABC7018) Attempt to advertise service to Logos Classified Ads failed.
-1967362023 OS and Network Services: (Hex 0x8ABC7019) Access denied.
-1967362022 OS and Network Services: (Hex 0x8ABC701A) Buffer underflowed.
-1967362021 OS and Network Services: (Hex 0x8ABC701B) File already exists.
-1967362020 OS and Network Services: (Hex 0x8ABC701C) The provided refnum is invalid.
-1967362019 OS and Network Services: (Hex 0x8ABC701D) A null refnum was provided as input.
-1967362016 OS and Network Services: (Hex 0x8ABC7020) Unexpected OS exception occurred.
-1967362015 OS and Network Services: (Hex 0x8ABC7021) Failed to load library.
-1967362014 OS and Network Services: (Hex 0x8ABC7022) Class not found.
-1967362013 OS and Network Services: (Hex 0x8ABC7023) No known value.
-1967362012 OS and Network Services: (Hex 0x8ABC7024) Invalid locale.
-1967362000 OS and Network Services: (Hex 0x8ABC7030) Invalid UTF8 encoding sequence.
-1967361999 OS and Network Services: (Hex 0x8ABC7031) Citadel ran out of shared memory.
-1967361998 OS and Network Services: (Hex 0x8ABC7032) Badly formatted GUID string.
-1967361997 OS and Network Services: (Hex 0x8ABC7033) The data type of the shared variable does not support the property value you specified. Refer to the LabVIEW Help for information about how to determine the supported shared variable properties.
-1967361996 OS and Network Services: (Hex 0x8ABC7034) Unable to convert.
-1967361995 OS and Network Services: (Hex 0x8ABC7035) Corruptions were detected in shared memory.
-1967357951 OS and Network Services: (Hex 0x8ABC8001) The Network Variable Engine, has not been setup to use MXS. This should happen the first time you run the service. This error is often the result of not restarting your computer after an install. Please verify that the "National Instruments Variable Engine" service is running.
-1967357950 OS and Network Services: (Hex 0x8ABC8002) The I\O Server is not setup in MXS. The first time the "Network Variable Engine" service launches it will do so. Please verify that the "Network Variable Engine" service is running.
-1967357949 OS and Network Services: (Hex 0x8ABC8003) Unable to query Measurement & Automation Explorer for the Network Variable Engine. Make sure the Network Variable Engine (which installs support for network-published shared variables) exists on the RT target and check that the network connection is valid.
-1967345663 OS and Network Services: (Hex 0x8ABCB001) Generic security error.
-1967345662 OS and Network Services: (Hex 0x8ABCB002) Version is not supported by peer.
-1967345661 OS and Network Services: (Hex 0x8ABCB003) Account is locked.
-1967345660 OS and Network Services: (Hex 0x8ABCB004) Logos session timed out or is locked out by other users.
-1967345659 OS and Network Services: (Hex 0x8ABCB005) The specified user does not exist.
-1967345658 OS and Network Services: (Hex 0x8ABCB006) The specified group does not exist.
-1967345657 OS and Network Services: (Hex 0x8ABCB007) Duplicate name.
-1967345656 OS and Network Services: (Hex 0x8ABCB008) Message is corrupted.
-1967345655 OS and Network Services: (Hex 0x8ABCB009) The domain server failed to complete a function.
-1967345654 OS and Network Services: (Hex 0x8ABCB00A) Cannot delete built-in principals.
-1967345653 OS and Network Services: (Hex 0x8ABCB00B) Invalid password.
-1967345652 OS and Network Services: (Hex 0x8ABCB00C) Not a local computer.
-1967345651 OS and Network Services: (Hex 0x8ABCB00D) Not an administrator.
-1967345650 OS and Network Services: (Hex 0x8ABCB00E) Domain is not defined.
-1967345649 OS and Network Services: (Hex 0x8ABCB00F) Domain already exists.
-1967345648 OS and Network Services: (Hex 0x8ABCB010) Password is too short or too long.
-1967345647 OS and Network Services: (Hex 0x8ABCB011) Machine is denied access.
-1967345646 OS and Network Services: (Hex 0x8ABCB012) Requested data denied.
-1967345632 OS and Network Services: (Hex 0x8ABCB020) Cannot lock account.
-1967345631 OS and Network Services: (Hex 0x8ABCB021) Network connection timed out.
-1967345630 OS and Network Services: (Hex 0x8ABCB022) File corrupted.
-1967345629 OS and Network Services: (Hex 0x8ABCB023) Network is disconnected.
-1967345628 OS and Network Services: (Hex 0x8ABCB024) Requested data not found.
-1967345627 OS and Network Services: (Hex 0x8ABCB025) Operation cancelled by user.
-1967345626 OS and Network Services: (Hex 0x8ABCB026) Attempt to advertise service to NI PSP Service Locator failed.
-1967345616 OS and Network Services: (Hex 0x8ABCB030) Message size less than one block.
-1967345615 OS and Network Services: (Hex 0x8ABCB031) Failed to generate random number.
-1967345614 OS and Network Services: (Hex 0x8ABCB032) Passwords do not match.
-1967345612 OS and Network Services: (Hex 0x8ABCB034) Password too short.
-1967345611 OS and Network Services: (Hex 0x8ABCB035) Password too long.
-1967345610 OS and Network Services: (Hex 0x8ABCB036) Domain already added.
-1967345609 OS and Network Services: (Hex 0x8ABCB037) No more principals.
-1967345152 LabVIEW: (Hex 0x8ABCB200) Invalid refnum.
-1967345151 LabVIEW: (Hex 0x8ABCB201) Invalid property code.
-1967345150 LabVIEW: (Hex 0x8ABCB202) Invalid privilege ID.
-1967345149 LabVIEW: (Hex 0x8ABCB203) Invalid access type.
-1967345148 LabVIEW: (Hex 0x8ABCB204) Invalid argument.
-1967345147 LabVIEW: (Hex 0x8ABCB205) Entry not found.
-1950679041 LabVIEW: (Hex 0x8BBAFFFF) The prototype of a shared variable whose data type is custom cannot be an empty variant.
-1950679040 LabVIEW: (Hex 0x8BBB0000) The value from this shared variable might not be the most current value from the data source.
-1950679039 LabVIEW: (Hex 0x8BBB0001) Sensor failure
-1950679038 LabVIEW: (Hex 0x8BBB0002) General device error response.
-1950679037 LabVIEW: (Hex 0x8BBB0003) The shared variable specified in the binding URL does not exist in the process. Ensure that all shared variables are deployed and the variable identifier URL is correct.
-1950679036 LabVIEW: (Hex 0x8BBB0004) General communications failure.
-1950679035 LabVIEW: (Hex 0x8BBB0005) Unable to locate the shared variable in the Shared Variable Engine (SVE). Deployment of this shared variable may have failed, the SVE has not started, or the SVE is too busy to respond to this request.
-1950679034 LabVIEW: (Hex 0x8BBB0006) The shared variable has no value.
-1950679033 LabVIEW: (Hex 0x8BBB0007) The shared variable is inactive.
-1950679032 LabVIEW: (Hex 0x8BBB0008) Sensor inaccurate
-1950679031 LabVIEW: (Hex 0x8BBB0009) Engineering unit limits exceeded.
-1950679030 LabVIEW: (Hex 0x8BBB000A) Unspecified error
-1950679029 LabVIEW: (Hex 0x8BBB000B) Math error
-1950679028 LabVIEW: (Hex 0x8BBB000C) Communications link failure
-1950679027 LabVIEW: (Hex 0x8BBB000D) NI-PSP has not connected to the server yet
-1950679026 LabVIEW: (Hex 0x8BBB000E) DNS lookup failed for the server.
-1950679025 LabVIEW: (Hex 0x8BBB000F) The server is not reachable.
-1950679024 LabVIEW: (Hex 0x8BBB0010) Service lookup failed for the server.
-1950679023 LabVIEW: (Hex 0x8BBB0011) The process specified in the binding URL does not exist. Ensure that all shared variables are deployed and the variable identifier URL is correct.
-1950679022 LabVIEW: (Hex 0x8BBB0012) The process was not found or is not responding.
-1950679021 LabVIEW: (Hex 0x8BBB0013) Failed to resolve URL for this shared variable.
-1950679020 LabVIEW: (Hex 0x8BBB0014) Unable to access the shared variable. This error can occur if you attempt to read from a write-only variable or write to a read-only variable, or if you do not have permission to access the variable.
-1950679019 LabVIEW: (Hex 0x8BBB0015) Subscribe failed. This error can occur when a client attempts to connect to a host using Logos, when the host only supports LogosXT.
-1950679018 LabVIEW: (Hex 0x8BBB0016) Invalid URL for this shared variable.
-1950679017 LabVIEW: (Hex 0x8BBB0017) Invalid combination of feature packs
-1950679016 LabVIEW: (Hex 0x8BBB0018) Invalid float value.
-1950679015 LabVIEW: (Hex 0x8BBB0019) Invalid Boolean value.
-1950679014 LabVIEW: (Hex 0x8BBB001A) Value attribute not found.
-1950679013 LabVIEW: (Hex 0x8BBB001B) Invalid access type.
-1950679012 LabVIEW: (Hex 0x8BBB001C) Missing access type.
-1950679011 LabVIEW: (Hex 0x8BBB001D) Invalid URL syntax.
-1950679010 LabVIEW: (Hex 0x8BBB001E) Shared variable is bound but the path or URL is not specified.
-1950679009 LabVIEW: (Hex 0x8BBB001F) A path and URL are both specified.
-1950679008 LabVIEW: (Hex 0x8BBB0020) Invalid value for the Enable Aliasing option.
-1950679007 LabVIEW: (Hex 0x8BBB0021) A value is missing for the Enable Aliasing option.
-1950679006 LabVIEW: (Hex 0x8BBB0022) Invalid value for Single Writer option.
-1950679005 LabVIEW: (Hex 0x8BBB0023) You must select a name for the shared variable.
-1950679004 LabVIEW: (Hex 0x8BBB0024) Two var type feature packs are selected
-1950679003 LabVIEW: (Hex 0x8BBB0025) No var type feature pack is selected
-1950679002 LabVIEW: (Hex 0x8BBB0026) Var type feature packs must be required
-1950679001 LabVIEW: (Hex 0x8BBB0027) Buffer size must be greater than 1.
-1950679000 LabVIEW: (Hex 0x8BBB0028) Array length must be greater than or equal to 2.
-1950678999 LabVIEW: (Hex 0x8BBB0029) Data points in waveform must be greater than or equal to 1.
-1950678998 LabVIEW: (Hex 0x8BBB002A) Global variables can only be accessed from the local machine.
-1950678997 LabVIEW: (Hex 0x8BBB002B) You cannot use a Variable Node of this type on this target.
-1950678996 LabVIEW: (Hex 0x8BBB002C) The variable configuration is invalid. Edit the variable properties to correct the configuration.
-1950678995 LabVIEW: (Hex 0x8BBB002D) Variable has undefined data type.
-1950678994 LabVIEW: (Hex 0x8BBB002E) Variable has invalid data type.
-1950678993 LabVIEW: (Hex 0x8BBB002F) The Raw Full Scale value must be greater than the Raw Zero Scale value.
-1950678992 LabVIEW: (Hex 0x8BBB0030) The Raw Scale and/or Engineering Scale is invalid.
-1950678991 LabVIEW: (Hex 0x8BBB0031) The Engineering Full Scale value should not be equal to Engineering Zero Scale value.
-1950678990 LabVIEW: (Hex 0x8BBB0032) Scaling type attribute not specified.
-1950678989 LabVIEW: (Hex 0x8BBB0033) Scaling ranges not fully specified.
-1950678988 LabVIEW: (Hex 0x8BBB0034) The number of arrays, elements, and points per waveform must be greater than or equal to 1.
-1950678987 LabVIEW: (Hex 0x8BBB0035) This piece of configuration does not exist for this type of variable.
-1950678986 LabVIEW: (Hex 0x8BBB0036) Unspecified shared variable error.
-1950678985 LabVIEW: (Hex 0x8BBB0037) Invalid variable name. The name of a variable cannot start with a single quote ('), start or end with a space, or contain a backslash, forward slash, or any of the following backslash '\' codes: \r \n \t \b \s.
-1950678984 LabVIEW: (Hex 0x8BBB0038) Variable names can have a maximum of 255 characters.
-1950678983 LabVIEW: (Hex 0x8BBB0039) The array sizes in the network buffer must be greater than or equal to the array sizes in the real-time FIFO buffer. The waveform sizes in the network buffer must be greater than or equal to the waveform sizes in the real-time FIFO buffer.
-1950678982 LabVIEW: (Hex 0x8BBB003A) The shared variable client-side read buffer is full.
-1950678981 LabVIEW: (Hex 0x8BBB003B) The shared variable client-side read buffer overflowed.
-1950678980 LabVIEW: (Hex 0x8BBB003C) The shared variable server-side write buffer is full.
-1950678979 LabVIEW: (Hex 0x8BBB003D) The shared variable server-side write buffer overflowed.
-1950678978 LabVIEW: (Hex 0x8BBB003E) The project that contains the project library you want to add a shared variable to must be open.
-1950678977 LabVIEW: (Hex 0x8BBB003F) Unable to deploy the library because the name is reserved. You cannot deploy a library named "System", "LV", or "FP". You also cannot deploy a library with a name that starts with "NI_".
-1950678976 LabVIEW: (Hex 0x8BBB0040) Attempted to load, replace, or remove a configuration from a different source. Your configuration might conflict with the NI Scan Engine configuration.
-1950678975 LabVIEW: (Hex 0x8BBB0041) Invalid Integer value.
-1950678974 LabVIEW: (Hex 0x8BBB0042) Invalid Logging String Format
-1950678972 LabVIEW: (Hex 0x8BBB0044) LabVIEW failed to load Logos.
-1950678971 LabVIEW: (Hex 0x8BBB0045) LabVIEW could not resolve the machine alias for this Shared Variable and is using a cached IP Address instead.
-1950678970 LabVIEW: (Hex 0x8BBB0046) Failed to load rtvarsup, which is required for Shared Variables with the Real-Time FIFO enabled.
-1950678969 LabVIEW: (Hex 0x8BBB0047) Failed to load rtvarnet, which is required for Network-Published Shared Variables with the Real-Time FIFO enabled.
-1950678968 LabVIEW: (Hex 0x8BBB0048) Failed to load nitaglv, which is required for Network-Published Shared Variables.
-1950678967 LabVIEW: (Hex 0x8BBB0049) Aliasee is missing.
-1950678966 LabVIEW: (Hex 0x8BBB004A) Cannot access I/O variables in Direct mode remotely.
-1950678965 LabVIEW: (Hex 0x8BBB004B) The value read is of a data type that cannot be converted to the data type of this Shared Variable node.
-1950678964 LabVIEW: (Hex 0x8BBB004C) Failed to load NI Scan Engine software required for I/O Variable access. If you are hosting I/O variables on an RT target, ensure that the NI Scan Engine is installed on the RT target. If you are hosting I/O variables on Windows, you must install a Windows I/O driver, such as DeviceNet, that includes NI Scan Engine support. If you are hosting I/O variables in a Windows VI, the VI must be part of an open LabVIEW project. If you are hosting I/O variables in a Windows-built application, the application must be configured to include hardware configuration.
-1950678963 LabVIEW: (Hex 0x8BBB004D) Unable to open the variable connection. A connection to the specified variable is already open using a different data type.
-1950678962 LabVIEW: (Hex 0x8BBB004E) The specified variable does not support the specified read, write, or open operation.
-1950678961 LabVIEW: (Hex 0x8BBB004F) The connection to the variable has been closed.
-1950678960 LabVIEW: (Hex 0x8BBB0050) The specified variable connection is not configured to read timestamps.
-1950678959 LabVIEW: (Hex 0x8BBB0051) The specified I/O Variable is configured with a timeout, but timeouts are not supported when accessing an I/O variable locally.
-1950678958 LabVIEW: (Hex 0x8BBB0052) This property can be called only on an I/O alias.
-1950678957 LabVIEW: (Hex 0x8BBB0053) This property can be called only on an I/O variable.
-1950678956 LabVIEW: (Hex 0x8BBB0054) The property cannot be set when the variable is reserved.
-1950678955 LabVIEW: (Hex 0x8BBB0055) Invalid URL. The URL cannot contain # or ? characters.
-1950678954 LabVIEW: (Hex 0x8BBB0056) The string for the Variable Engine or protocol portion of the URL is invalid.
-1950678953 LabVIEW: (Hex 0x8BBB0057) The URL is invalid.
-1950678952 LabVIEW: (Hex 0x8BBB0058) The URL is invalid. The URL contains the User Information subcomponent within the Authority which isn't supported by this scheme. If you included the "@" character as part of the Authority and didn't intend for it to signify the User Information field, replace the "@" character with its percent encode UTF-8 equivalent form of "%40".
-1950678951 LabVIEW: (Hex 0x8BBB0059) The host name specified in the URL is invalid. It contains one or more of the characters ":/?#[]@" which are illegal to use in their decoded form. If the host name contains one of these characters, replace it with its percent encoded UTF-8 equivalent form. For example, to specify the host name "My Machine?" you must use the string "My Machine%3F".
-1950678950 LabVIEW: (Hex 0x8BBB005A) The port specified in the Authority component of the URL is invalid. The port must consist of only numeric characters.
-1950678949 LabVIEW: (Hex 0x8BBB005B) The URL contains one or more unsupported path segments. Path segments of the form "/./", "/../", and empty path segments "//" are not supported.
-1950678948 LabVIEW: (Hex 0x8BBB005C) The path in the URL is invalid.
-1950678947 LabVIEW: (Hex 0x8BBB005D) The specified URL is invalid. The URL specifies a host name that includes a port. However, ports are not supported by the specified variable engine.
-1950678946 LabVIEW: (Hex 0x8BBB005E) The specified URL contains a relative path reference, but LabVIEW does not support relative paths in Variable URLs. To correct the problem, use absolute path references instead of relative references. Variable URLs must take one of the following three forms: (1) [Variable Engine]://[Host Name]/[Container Name]/[Variable Name] or (2) //[Host Name]/[Container Name]/[Variable Name] or (3) /[Container Name]/[Variable Name].
-1950678945 LabVIEW: (Hex 0x8BBB005F) The host name specified in the variable identifier URL does not correspond to the local host, but the specified variable engine URL only supports an operation on the local host. You cannot perform the specified operation on a remotely hosted variable or stream endpoint. Use the PSP Variable Engine URL (ni.var.psp) to read or write a network-published I/O variable or I/O alias remotely.
-1950678944 LabVIEW: (Hex 0x8BBB0060) The Class Identifier property of the variable object specified in the variable identifier URL is incompatible with the refnum configuration. The class of the variable object is not equivalent to or does not derive from the class you configured for the refnum. This error might occur if you try to reference a Variable object, but the specified variable identifier URL does not reference a Variable.
-1950678943 LabVIEW: (Hex 0x8BBB0061) Timed out while attempting to open a connection to the variable.
-1950678942 LabVIEW: (Hex 0x8BBB0062) Scaling coerce attribute not specified.
-1950678941 LabVIEW: (Hex 0x8BBB0063) An empty string is not a valid URL. If you want to reference the root container within a variable engine, you need to specify the path explicitly using one of the following URL formats: "[Variable Engine]://[Host Name]", "[Variable Engine]:", or "/".
-1950678940 LabVIEW: (Hex 0x8BBB0064) The remote configuration web service is not installed on the host specified in the URL.
-1950678939 LabVIEW: (Hex 0x8BBB0065) The version of the remote configuration web service installed on the host specified in the URL is not compatible with this version of LabVIEW.
-1950678938 LabVIEW: (Hex 0x8BBB0066) The NI Vision software is not installed. This datatype can only be used when NI Vision is installed.
-1950678937 LabVIEW: (Hex 0x8BBB0067) An attempt was made to read or write a property that is only valid for readable variable objects.
-1950678936 LabVIEW: (Hex 0x8BBB0068) The specified buffer size is invalid. Valid values are zero and sizes greater than two. A buffer size of zero will disable buffering and cause the connection to maintain only the latest value.
-1950678935 LabVIEW: (Hex 0x8BBB0069) The scheme specified in the URL is not supported.
-1950678934 LabVIEW: (Hex 0x8BBB006A) Requires an open variable connection to read or write the specified property.

More to Come

Retrieved from "https://labviewwiki.org/w/index.php?title=List_of_errors&oldid=31246"