Jump to content

List of errors: Difference between revisions

From LabVIEW Wiki
Newer edit →
Visual
Started as {{stub}}
 
Started Page
Line 1: Line 1:
{{stub}}
{{stub}}
{{TOCright}}
Below is a list of every Error Code built into the [[LabVIEW]] IDE.  This list might not be complete.  Clicking on the Error Codes with an attached page will have more information about the error.  (If pages exist the link appears blue. If a page does not exist the page appears red.)
{| class="wikitable sortable"
! Code
! Message
|-
| [[Error Code -2147483638|-2147483638]]
| LabVIEW: (Hex 0x8000000A) The data necessary to complete this operation is not yet available.
|-
| [[Error Code -2147467263|-2147467263]]
| LabVIEW: (Hex 0x80004001) Not implemented.
<nowiki>=========================</nowiki>
NI System Configuration: This operation is not implemented for this target or resource.
|-
| [[Error Code -2147467262|-2147467262]]
| LabVIEW: (Hex 0x80004002) No such interface supported.
|-
| [[Error Code -2147467261|-2147467261]]
| LabVIEW: (Hex 0x80004003) Invalid pointer.
<nowiki>=========================</nowiki>
NI System Configuration: A required pointer parameter was NULL.
|-
| [[Error Code -2147467260|-2147467260]]
| LabVIEW: (Hex 0x80004004) Operation aborted.
|-
| [[Error Code -2147467259|-2147467259]]
| LabVIEW: (Hex 0x80004005) Unspecified error.
<nowiki>=========================</nowiki>
NI System Configuration: Miscellaneous operation failure.
|-
| [[Error Code -2147418113|-2147418113]]
| LabVIEW: (Hex 0x8000FFFF) Catastrophic failure.
<nowiki>=========================</nowiki>
NI System Configuration: A critical unexpected error occurred. Please report this error to NI.
|-
| [[Error Code -2147220735|-2147220735]]
| MAX:  (Hex 0x80040301) Internal error: The specified class could not be found in the configuration database. Your installation may need to be repaired.
|-
| [[Error Code -2147220733|-2147220733]]
| MAX:  (Hex 0x80040303) Internal error: The requested object was not found in the configuration database. Please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
|-
| [[Error Code -2147220731|-2147220731]]
| MAX:  (Hex 0x80040305) Internal error: The attribute does not exist on the class or object. Please note the steps you performed that led to this error and contact technical support  at http://ni.com/support.
|-
| [[Error Code -2147220730|-2147220730]]
| MAX:  (Hex 0x80040306) Internal error: The requested attribute change does not match the type of the attribute. Please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
|-
| [[Error Code -2147220727|-2147220727]]
| MAX:  (Hex 0x80040309) The client process cannot communicate with the configuration server process. If this problem persists, please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
|-
| [[Error Code -2147220725|-2147220725]]
| MAX:  (Hex 0x8004030B) Internal error: A client attempted to modify an object that is static or constant or tried to modify a class. Please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
|-
| [[Error Code -2147220724|-2147220724]]
| MAX:  (Hex 0x8004030C) Internal error: An expected interface was not implemented or was called into incorrectly. Please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
|-
| [[Error Code -2147220723|-2147220723]]
| MAX:  (Hex 0x8004030D) The specified configuration file is not writeable by the current user. Please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
|-
| [[Error Code -2147220721|-2147220721]]
| MAX:  (Hex 0x8004030F) The configuration database cannot be opened, possibly due to corruption. Please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
|-
| [[Error Code -2147220719|-2147220719]]
| MAX:  (Hex 0x80040311) The client process has been disconnected from the configuration server. If this problem persists, please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
|-
| [[Error Code -2147220717|-2147220717]]
| MAX:  (Hex 0x80040313) The Remote Procedure Call connecting the client to the configuration server failed to be initialized. Your installation may need to be repaired.
|-
| [[Error Code -2147220712|-2147220712]]
| MAX:  (Hex 0x80040318) Internal error: The client has failed to connect to the configuration server, possibly because the server is too busy or has run into a communication error. Please note the steps you performed that led to this error and contact technical support.
|-
| [[Error Code -2147220705|-2147220705]]
| MAX:  (Hex 0x8004031F) Internal error: The client failed to reconnect to the remote system. Rebooting the remote system may fix this problem.
|-
| [[Error Code -2147220704|-2147220704]]
| MAX:  (Hex 0x80040320) Internal error: An unexpected error occurred with the configuration. Please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
|-
| [[Error Code -2147220701|-2147220701]]
| MAX:  (Hex 0x80040323) Failed to reconnect to the remote system because it appears to be a different one than the one originally connected to. To fix this issue, exit and restart the application.
|-
| [[Error Code -2147220699|-2147220699]]
| MAX:  (Hex 0x80040325) Failed to load Remote Procedure Call library. Your installation may need to be repaired.
|-
| [[Error Code -2147220698|-2147220698]]
| MAX:  (Hex 0x80040326) Failed to find Remote Procedure Call library's GUID function. Your installation may need to be repaired.
|-
| [[Error Code -2147220697|-2147220697]]
| MAX:  (Hex 0x80040327) The string is too long for the export operation to handle.
|-
| [[Error Code -2147220695|-2147220695]]
| MAX:  (Hex 0x80040329) The system does not have enough free disk space to write to the configuration database. Please free up some disk space and retry the operation.
|-
| [[Error Code -2147220694|-2147220694]]
| MAX:  (Hex 0x8004032A) Unable to access the configuration database because an incompatible data dictionary has been detected. This error may have been caused by a recently installed component. Note the steps you performed that led to this error and contact technical support at http://ni.com/support.
|-
| [[Error Code -2147220693|-2147220693]]
| MAX:  (Hex 0x8004032B) The configuration database is not running. Restart your system and try again. Visit ni.com/info and enter the Info Code MAXStoppedServiceError if the problem persists.
|-
| [[Error Code -2147220692|-2147220692]]
| MAX:  (Hex 0x8004032C) The configuration database exited abnormally. Visit ni.com/info and enter the Info Code MAXTerminatedServiceError if the problem persists.
|-
| [[Error Code -2147220691|-2147220691]]
| MAX:  (Hex 0x8004032D) The operation timed out while waiting on the configuration database to start. Visit ni.com/info and enter the Info Code MAXServiceNotStartingError if the problem persists.
|-
| [[Error Code -2147220690|-2147220690]]
| MAX:  (Hex 0x8004032E) The configuration database is not installed on the system. Visit ni.com/info and enter the Info Code MAXServiceNotInstalledError for more information.
|-
| [[Error Code -2147220689|-2147220689]]
| MAX:  (Hex 0x8004032F) The configuration database encountered an unexpected error. Visit ni.com/info and enter the Info Code MAXSvcLocError for more information.
|-
| [[Error Code -2147220688|-2147220688]]
| MAX:  (Hex 0x80040330) The configuration database timed out while waiting on a driver. Visit ni.com/info and enter the Info Code MAXGeneralTimeoutError if the problem persists.
|-
| [[Error Code -2147220624|-2147220624]]
| NI System Configuration: The property already exists with a different type or value.
|-
| [[Error Code -2147220623|-2147220623]]
| NI System Configuration: The property does not exist for this resource.
|-
| [[Error Code -2147220622|-2147220622]]
| NI System Configuration: The name of the target or expert contains illegal characters or has an invalid format. Each label of the hostname must be between 1 and 63 characters long, and the entire hostname, including delimiting dots, must be 255 characters or less.
|-
| [[Error Code -2147220621|-2147220621]]
| NI System Configuration: Could not contact the System Configuration API at the specified target address. Ensure that the system is online.
|-
| [[Error Code -2147220620|-2147220620]]
| NI System Configuration: A specified expert is not installed.
|-
| [[Error Code -2147220619|-2147220619]]
| NI System Configuration: The specified resource name does not exist.
|-
| [[Error Code -2147220618|-2147220618]]
| NI System Configuration: The specified mode is invalid.
|-
| [[Error Code -2147220617|-2147220617]]
| NI System Configuration: The value 'allowAsyncNotification' is TRUE and the attribute is not ready.
|-
| [[Error Code -2147220616|-2147220616]]
| NI System Configuration: The NI System Configuration API is not installed at the specified target.
|-
| [[Error Code -2147220615|-2147220615]]
| NI System Configuration: You cannot install more than one callback handler per framework instance.
|-
| [[Error Code -2147220614|-2147220614]]
| NI System Configuration: The suggested name contains illegal characters.
|-
| [[Error Code -2147220613|-2147220613]]
| NI System Configuration: Another resource already has the suggested name.
|-
| [[Error Code -2147220612|-2147220612]]
| NI System Configuration: None of the changed properties can be validated.
|-
| [[Error Code -2147220611|-2147220611]]
| NI System Configuration: The current user does not have permission for the requested operation.
|-
| [[Error Code -2147220610|-2147220610]]
| NI System Configuration: The resource being renamed has dependencies, and the 'updateDependencies' flag was false.
|-
| [[Error Code -2147220609|-2147220609]]
| NI System Configuration: A property contained a value that is not valid or is out of range.
|-
| [[Error Code -2147220608|-2147220608]]
| NI System Configuration: Multiple properties contained values that are inconsistent with each other.
|-
| [[Error Code -2147220607|-2147220607]]
| NI System Configuration: The operation was canceled.
|-
| [[Error Code -2147220606|-2147220606]]
| NI System Configuration: Could not parse the response from the NI System Configuration API at the specified target address.
|-
| [[Error Code -2147220605|-2147220605]]
| NI System Configuration: The resource name is valid but the operation requires the resource to be present.
|-
| [[Error Code -2147220604|-2147220604]]
| NI System Configuration: The resource name is valid but the operation is not supported on simulated resources.
|-
| [[Error Code -2147220603|-2147220603]]
| NI System Configuration: The resource requires being in the firmware update state to perform this operation.
|-
| [[Error Code -2147220602|-2147220602]]
| NI System Configuration: The uploaded firmware image does not work with this resource.
|-
| [[Error Code -2147220601|-2147220601]]
| NI System Configuration: The uploaded firmware image is corrupt or incomplete.
|-
| [[Error Code -2147220600|-2147220600]]
| NI System Configuration: The specified firmware version does not exist.
|-
| [[Error Code -2147220599|-2147220599]]
| NI System Configuration: The specified firmware version is older than what is currently installed.
|-
| [[Error Code -2147220598|-2147220598]]
| NI System Configuration: The username or password is incorrect.
|-
| [[Error Code -2147220597|-2147220597]]
| NI System Configuration: The specified firmware was not successfully installed. See the output parameters for more information.
|-
| [[Error Code -2147220596|-2147220596]]
| NI System Configuration: The data could not be encrypted.
|-
| [[Error Code -2147220595|-2147220595]]
| NI System Configuration: The changes were not saved. Some of the modified properties were not validated because they do not apply to this item.
|-
| [[Error Code -2147220594|-2147220594]]
| NI System Configuration: The calibration password is incorrect.
|-
| [[Error Code -2147220593|-2147220593]]
| NI System Configuration: Could not delete the specified resource because it is present.
|-
| [[Error Code -2147220592|-2147220592]]
| NI System Configuration: Failed transmitting data to or from the web server at the specified target address.
|-
| [[Error Code -2147220591|-2147220591]]
| NI System Configuration: The NI System Configuration API at the specified target address could not decrypt the data.
|-
| [[Error Code -2147220590|-2147220590]]
| NI System Configuration: The specified firmware requires a newer version of the expert than what is currently installed.
|-
| [[Error Code -2147220589|-2147220589]]
| NI System Configuration: There was uncertainty regarding what action to take during an import.
|-
| [[Error Code -2147220588|-2147220588]]
| NI System Configuration: A required item could not be imported.
|-
| [[Error Code -2147220587|-2147220587]]
| NI System Configuration: Could not perform the specified operation because the item is currently in use.
|-
| [[Error Code -2147220586|-2147220586]]
| NI System Configuration: Could not perform the specified operation because the item type is unknown or not supported.
|-
| [[Error Code -2147220560|-2147220560]]
| NI System Configuration: Unable to write to file or folder. Permission denied.
|-
| [[Error Code -2147220559|-2147220559]]
| NI System Configuration: Unable to connect to the specified system. Ensure that the system is online.
|-
| [[Error Code -2147220558|-2147220558]]
| NI System Configuration: Error running transform to generate report
|-
| [[Error Code -2147220557|-2147220557]]
| NI System Configuration: Unable to find NI MAX on the system. Please reinstall.
|-
| [[Error Code -2147220556|-2147220556]]
| NI System Configuration: Unexpected error launching nimax.exe
|-
| [[Error Code -2147220555|-2147220555]]
| NI System Configuration: Launched nimax.exe but it did not complete in a reasonable time.
|-
| [[Error Code -2147220554|-2147220554]]
| NI System Configuration: Unable to find XSL transform to generate report
|-
| [[Error Code -2147220553|-2147220553]]
| NI System Configuration: Incorrect report file extension provided
|-
| [[Error Code -2147220552|-2147220552]]
| NI System Configuration: Report file is read-only. Unable to generate report.
|-
| [[Error Code -2147220551|-2147220551]]
| NI System Configuration: Report file exists and the NIMAX_FailIfOverwritingReport flag was set
|-
| [[Error Code -2147220550|-2147220550]]
| NI System Configuration: Error creating directory for report files
|-
| [[Error Code -2147220480|-2147220480]]
| NI System Configuration: Error opening a file
|-
| [[Error Code -2147220479|-2147220479]]
| NI System Configuration: The object cannot be accessed because of insufficient permissions
|-
| [[Error Code -2147220478|-2147220478]]
| NI System Configuration: Error with the object copier
|-
| [[Error Code -2147220477|-2147220477]]
| NI System Configuration: Error performing a file operation
|-
| [[Error Code -2147220476|-2147220476]]
| NI System Configuration: Names from one expert have collided with another expert
|-
| [[Error Code -2147220475|-2147220475]]
| NI System Configuration: Unexpected error has occurred
|-
| [[Error Code -2147220474|-2147220474]]
| NI System Configuration: The expert requested its stream for import but one does not exist because it did not export a stream.
|-
| [[Error Code -2147220473|-2147220473]]
| NI System Configuration: Error compressing or decompressing file
|-
| [[Error Code -2147220472|-2147220472]]
| NI System Configuration: Error reading from a stream
|-
| [[Error Code -2147220471|-2147220471]]
| NI System Configuration: Error writing to a stream
|-
| [[Error Code -2147220470|-2147220470]]
| NI System Configuration: Error seeking to a position in a stream
|-
| [[Error Code -2147220469|-2147220469]]
| NI System Configuration: Repository not ready to be exported
|-
| [[Error Code -2147220468|-2147220468]]
| NI System Configuration: The file or stream chosen to import the repository from is not a valid repository
|-
| [[Error Code -2147220467|-2147220467]]
| NI System Configuration: The repository was exported with a newer version of MAX than what is on the importing machine
|-
| [[Error Code -2147220466|-2147220466]]
| NI System Configuration: The import storage could not be opened
|-
| [[Error Code -2147220465|-2147220465]]
| NI System Configuration: The export storage could not be created
|-
| [[Error Code -2147220464|-2147220464]]
| NI System Configuration: The object copier could not be created
|-
| [[Error Code -2147220463|-2147220463]]
| NI System Configuration: A copy operation is already in progress
|-
| [[Error Code -2147220462|-2147220462]]
| NI System Configuration: The custom file does not belong to a given expert
|-
| [[Error Code -2147220461|-2147220461]]
| NI System Configuration: A specified system is not supported by this expert.
|-
| [[Error Code -2147220460|-2147220460]]
| NI System Configuration: A specified system is presumably supported, but network errors prevent connection.
|-
| [[Error Code -2147220459|-2147220459]]
| NI System Configuration: The product is not installed on the specified system.
|-
| [[Error Code -2147220458|-2147220458]]
| NI System Configuration: The product is installed on the remote system, but is too old
|-
| [[Error Code -2147220457|-2147220457]]
| NI System Configuration: The product is installed on the remote system, but is too new
|-
| [[Error Code -2147220456|-2147220456]]
| NI System Configuration: The import data is too old. The product is not backward-compatible with this data.
|-
| [[Error Code -2147220455|-2147220455]]
| NI System Configuration: The import data is too new. The product is not forward-compatible with this data.
|-
| [[Error Code -2147220454|-2147220454]]
| NI System Configuration: The operation failed because no source items were specified
|-
| [[Error Code -2147220453|-2147220453]]
| NI System Configuration: The operation failed because some items were orphans
|-
| [[Error Code -2147220452|-2147220452]]
| NI System Configuration: The operation failed because some items were in-edit and not saved
|-
| [[Error Code -2147220451|-2147220451]]
| NI System Configuration: The operation failed because it would overwrite a file
|-
| [[Error Code -2147220450|-2147220450]]
| NI System Configuration: The operation failed because it would overwrite items.
|-
| [[Error Code -2147220449|-2147220449]]
| NI System Configuration: The operation failed because of missing dependency items.
|-
| [[Error Code -2147220448|-2147220448]]
| NI System Configuration: The operation timed out.
|-
| [[Error Code -2147220447|-2147220447]]
| NI System Configuration: The operation was canceled by the client
|-
| [[Error Code -2147220446|-2147220446]]
| NI System Configuration: The operation failed because of warning conflicts
|-
| [[Error Code -2147220445|-2147220445]]
| NI System Configuration: The operation failed because of general conflicts.
|-
| [[Error Code -2147220444|-2147220444]]
| NI System Configuration: The operation failed because of unresolved conflicts requiring user input
|-
| [[Error Code -2147220443|-2147220443]]
| NI System Configuration: An expert is not ready to accept the specified source or destination, but may become ready in the future
|-
| [[Error Code -2147220442|-2147220442]]
| NI System Configuration: The operation failed because some files were orphans
|-
| [[Error Code -2147220441|-2147220441]]
| NI System Configuration: Caller called a non-const method on an object that is logically const
|-
| [[Error Code -2147220440|-2147220440]]
| NI System Configuration: A product does not support the attempted copy mode (e.g. merge to file, etc)
|-
| [[Error Code -2147220388|-2147220388]]
| NI System Configuration: The image you are applying is not supported by the boot flow installed on the target. Boot flow migration is not supported when running locally.
|-
| [[Error Code -2147220387|-2147220387]]
| NI System Configuration: The image you are applying is not supported by the boot flow installed on the target. Make sure the target has access to ni.com or install boot flow migration support packages on the host.
|-
| [[Error Code -2147220386|-2147220386]]
| NI System Configuration: You must allow the target to reboot to perform the specified operation.
|-
| [[Error Code -2147220385|-2147220385]]
| NI System Configuration: The target requires newer functionality not supported by the software on your computer. Update NI System Configuration to the latest version to configure this target. See www.ni.com/r/rtconfigerror for more information.
|-
| [[Error Code -2147220384|-2147220384]]
| NI System Configuration: Running 'opkg update' failed to access at least one enabled feed. Consider disabling unnecessary feeds.
|-
| [[Error Code -2147220383|-2147220383]]
| NI System Configuration: The specified software feed was not found.
|-
| [[Error Code -2147220382|-2147220382]]
| NI System Configuration: Could not add the specified software feed because it already exists.
|-
| [[Error Code -2147220381|-2147220381]]
| NI System Configuration: The target does not support one of the specified installation options.
|-
| [[Error Code -2147220380|-2147220380]]
| NI System Configuration: The target does not include the functionality this operation requires. Update the firmware to the latest version.
|-
| [[Error Code -2147220379|-2147220379]]
| NI System Configuration: The target does not include the functionality this operation requires. Update the software to the latest version.
|-
| [[Error Code -2147220378|-2147220378]]
| NI System Configuration: SSH must be enabled on the target.
|-
| [[Error Code -2147220377|-2147220377]]
| NI System Configuration: Could not parse the response from opkg at the specified target address.
|-
| [[Error Code -2147220376|-2147220376]]
| NI System Configuration: The specified software set is the wrong type for this operation.
|-
| [[Error Code -2147220375|-2147220375]]
| NI System Configuration: The target requires using opkg to modify installed software.
|-
| [[Error Code -2147220374|-2147220374]]
| NI System Configuration: Disk encryption is not supported by the target.
|-
| [[Error Code -2147220373|-2147220373]]
| NI System Configuration: Could not find a device suitable for storing the encrypted disk recovery key. Format a USB drive with the appropriate filesystem label and insert it into the target.
|-
| [[Error Code -2147220372|-2147220372]]
| NI System Configuration: To restart your system, either specify 'localhost' on the front panel for Session in, or call Initialize Session first.
|-
| [[Error Code -2147220371|-2147220371]]
| NI System Configuration: The image is corrupt or the file type is invalid.
|-
| [[Error Code -2147220370|-2147220370]]
| NI System Configuration: Can only perform this action in safe or install mode, and the 'auto restart' flag was false.
|-
| [[Error Code -2147220369|-2147220369]]
| NI System Configuration: The encryption passphrase when applying an image was not the same as when the image was created.
|-
| [[Error Code -2147220368|-2147220368]]
| NI System Configuration: The IP address is invalid.
|-
| [[Error Code -2147220367|-2147220367]]
| NI System Configuration: The gateway address is invalid.
|-
| [[Error Code -2147220366|-2147220366]]
| NI System Configuration: The DNS server address is invalid.
|-
| [[Error Code -2147220365|-2147220365]]
| NI System Configuration: The subnet mask is invalid.
|-
| [[Error Code -2147220364|-2147220364]]
| NI System Configuration: Command is not supported by given protocol.
|-
| [[Error Code -2147220363|-2147220363]]
| NI System Configuration: Remote system replied with failure to config command.
|-
| [[Error Code -2147220362|-2147220362]]
| NI System Configuration: The remote system is locked. A password is required to configure.
|-
| [[Error Code -2147220361|-2147220361]]
| NI System Configuration: Password supplied for operation is invalid.
|-
| [[Error Code -2147220360|-2147220360]]
| NI System Configuration: The remote device is not configurable for some reason other than password.
|-
| [[Error Code -2147220359|-2147220359]]
| NI System Configuration: Failed to unlock the system.
|-
| [[Error Code -2147220358|-2147220358]]
| NI System Configuration: Failed to lock the system.
|-
| [[Error Code -2147220357|-2147220357]]
| NI System Configuration: General installation failure.
|-
| [[Error Code -2147220356|-2147220356]]
| NI System Configuration: Installation files were corrupt or not found in the repository.
|-
| [[Error Code -2147220355|-2147220355]]
| NI System Configuration: The installation file is empty.
|-
| [[Error Code -2147220354|-2147220354]]
| NI System Configuration: The system must have a valid IP address before certain operations such as installation. The IP address cannot be 0.0.0.0.
|-
| [[Error Code -2147220352|-2147220352]]
| NI System Configuration: General install error.
|-
| [[Error Code -2147220350|-2147220350]]
| NI System Configuration: Installation to the specified target has already begun. Multiple installations are not allowed at the same time.
|-
| [[Error Code -2147220349|-2147220349]]
| NI System Configuration: Remote action aborted.
|-
| [[Error Code -2147220338|-2147220338]]
| NI System Configuration: Hard drive on the remote system is either full or encountered an I/O error.
|-
| [[Error Code -2147220337|-2147220337]]
| NI System Configuration: Hard drive format failed. The disk on the target may be unrecoverable.
|-
| [[Error Code -2147220336|-2147220336]]
| NI System Configuration: System must be in safe mode before attempting a hard drive format. Restart the target into safe mode and attempt the command again.
|-
| [[Error Code -2147220335|-2147220335]]
| NI System Configuration: System failed to restart after the hard drive was formatted. The system is in an unknown state. You may have to manually restart the target.
|-
| [[Error Code -2147220334|-2147220334]]
| NI System Configuration: The server refused the network connection.
|-
| [[Error Code -2147220331|-2147220331]]
| NI System Configuration: Failed to get one or more files while creating system image. The image is incomplete or invalid.
|-
| [[Error Code -2147220330|-2147220330]]
| NI System Configuration: Failed to put one or more files while applying system image. The system may be in a corrupt state.
|-
| [[Error Code -2147220329|-2147220329]]
| NI System Configuration: The specified path does not contain a valid image.
|-
| [[Error Code -2147220328|-2147220328]]
| NI System Configuration: The image is for a different device class and is incompatible with the target.
|-
| [[Error Code -2147220327|-2147220327]]
| NI System Configuration: The image was not created from the specified target.
|-
| [[Error Code -2147220326|-2147220326]]
| NI System Configuration: The requested file system is not supported on the specified target.
|-
| [[Error Code -2147220325|-2147220325]]
| NI System Configuration: The specified target does not support custom software installations.
|-
| [[Error Code -2147220324|-2147220324]]
| NI System Configuration: A file transfer error (FTP or WebDAV) occurred.
|-
| [[Error Code -2147220323|-2147220323]]
| NI System Configuration: Operation timed out.
|-
| [[Error Code -2147220322|-2147220322]]
| NI System Configuration: The specified file was not found.
|-
| [[Error Code -2147220321|-2147220321]]
| NI System Configuration: The specified directory was not found.
|-
| [[Error Code -2147220320|-2147220320]]
| NI System Configuration: The specified file or directory path was not found.
|-
| [[Error Code -2147220319|-2147220319]]
| NI System Configuration: No software is available for installation to this target.
|-
| [[Error Code -2147220318|-2147220318]]
| NI System Configuration: The file or directory exists and the overwrite flag was false.
|-
| [[Error Code -2147220317|-2147220317]]
| NI System Configuration: The target was not formatted because the option to keep configuration after a format is supported only for targets on the local subnet. To format the target, repeat the operation without requesting to keep the configuration.
|-
| [[Error Code -2147220316|-2147220316]]
| NI System Configuration: Filename or pathname is longer than what the server supports.
|-
| [[Error Code -2147220315|-2147220315]]
| NI System Configuration: Failed when communicating with the system. This issue is usually caused by a high latency in the network. Refer to KnowledgeBase article 42GH3O00 on ni.com for possible solutions.
|-
| [[Error Code -2147220314|-2147220314]]
| NI System Configuration: The operation failed because of insufficient permissions.
|-
| [[Error Code -2147220313|-2147220313]]
| NI System Configuration: The operation failed because the path already exists.
|-
| [[Error Code -2147220312|-2147220312]]
| NI System Configuration: The execution of an external command, script, or application failed.
|-
| [[Error Code -2147220311|-2147220311]]
| NI System Configuration: Failed to download the file from the 'RT Images' repository.
|-
| [[Error Code -2147220309|-2147220309]]
| NI System Configuration: Failure to send command.
|-
| [[Error Code -2147220308|-2147220308]]
| NI System Configuration: Could not contact remote target. Ensure that the system is online.
|-
| [[Error Code -2147220307|-2147220307]]
| NI System Configuration: Could not access network.
|-
| [[Error Code -2147220306|-2147220306]]
| NI System Configuration: Command was not confirmed, result of operation is uncertain.
|-
| [[Error Code -2147220305|-2147220305]]
| NI System Configuration: Hostname could not be resolved by DNS.
|-
| [[Error Code -2147220304|-2147220304]]
| NI System Configuration: Timeout while waiting for restart. The system is offline.
|-
| [[Error Code -2147220303|-2147220303]]
| NI System Configuration: The sending new configuration operation returned a failure. However, the operation might not have failed.
|-
| [[Error Code -2147220300|-2147220300]]
| NI System Configuration: Cannot install more than one startup component.
|-
| [[Error Code -2147220299|-2147220299]]
| NI System Configuration: Invalid argument.
|-
| [[Error Code -2147220298|-2147220298]]
| NI System Configuration: Cannot uninstall a specified software component from the target because there are dependencies.
|-
| [[Error Code -2147220297|-2147220297]]
| NI System Configuration: Cannot install multiple packages of the same component.
|-
| [[Error Code -2147220296|-2147220296]]
| NI System Configuration: Cannot install a specified software component to the target because there are dependencies.
|-
| [[Error Code -2147220295|-2147220295]]
| NI System Configuration: A specified software component is incompatible with this target.
|-
| [[Error Code -2147220294|-2147220294]]
| NI System Configuration: A specified software component is incompatible with this target's operating system.
|-
| [[Error Code -2147220293|-2147220293]]
| NI System Configuration: A firmware update is required before installing.
|-
| [[Error Code -2147220292|-2147220292]]
| NI System Configuration: Cannot open file or folder.
|-
| [[Error Code -2147220291|-2147220291]]
| NI System Configuration: Duplicate or missing components on target installation.
|-
| [[Error Code -2147220290|-2147220290]]
| NI System Configuration: Buffer overflow, size is too small.
|-
| [[Error Code -2147220289|-2147220289]]
| NI System Configuration: The software installed on the target uses a CDF format not supported by the software on your computer. Update NI System Configuration or NI MAX to the latest version to configure this target.
|-
| [[Error Code -2147220288|-2147220288]]
| NI System Configuration: The specified software set or base system image cannot be installed to the target because it is invalid or cannot be found.
|-
| [[Error Code -2147220287|-2147220287]]
| NI System Configuration: The specified software set definition is incomplete and cannot be installed to the target. Some hidden dependencies were added.
|-
| [[Error Code -2147220286|-2147220286]]
| NI System Configuration: One or more software set items could not be found in the repository.
|-
| [[Error Code -2147220285|-2147220285]]
| NI System Configuration: There is a top-level hidden component installed.
|-
| [[Error Code -2147220284|-2147220284]]
| NI System Configuration: A component was passed in that is not an installable add-on. It may be an unknown ID, a defined item that is not an add-on, a missing add-on, or a non-installable add-on.
|-
| [[Error Code -2147220283|-2147220283]]
| NI System Configuration: Could not find the 'RT Images' repository location.
|-
| [[Error Code -2147220282|-2147220282]]
| NI System Configuration: Could not read the 'RT Images' registry key.
|-
| [[Error Code -2147220281|-2147220281]]
| NI System Configuration: Could not find the rts2cdf conversion utility.
|-
| [[Error Code -2147220280|-2147220280]]
| NI System Configuration: The operating system is not supported.
|-
| [[Error Code -2147220279|-2147220279]]
| NI System Configuration: Unspecified version while trying to install exact version of a component.
|-
| [[Error Code -2147220278|-2147220278]]
| NI System Configuration: Unsupported MAC address format. Supply the MAC address as a colon separated string of characters instead of Hex display.
|-
| [[Error Code -2147220277|-2147220277]]
| NI System Configuration: A component was passed in that is not a startup.
|-
| [[Error Code -2147024891|-2147024891]]
| LabVIEW: (Hex 0x80070005) Access denied. This error can occur if you attempt to write a single writer shared variable that is already connected to a subscriber with write access. Ensure that you connect only one target with write access to this shared variable at a time.
|-
| [[Error Code -2147024890|-2147024890]]
| LabVIEW: (Hex 0x80070006) Invalid handle.
|-
| [[Error Code -2147024882|-2147024882]]
| LabVIEW: (Hex 0x8007000E) Ran out of memory.
<nowiki>=========================</nowiki>
NI System Configuration: Out of memory.
|-
| [[Error Code -2147024809|-2147024809]]
| LabVIEW: (Hex 0x80070057) One or more arguments are invalid.
<nowiki>=========================</nowiki>
NI System Configuration: Invalid parameter.
|-
| [[Error Code -2132869120|-2132869120]]
| LabVIEW: (Hex 0x80DF0000) The assembly you are deploying is bad.
|-
| [[Error Code -2132869119|-2132869119]]
| LabVIEW: (Hex 0x80DF0001) The assembly handler does not support the sent command.
|-
| [[Error Code -2132869118|-2132869118]]
| LabVIEW: (Hex 0x80DF0002) A file I/O error occurred.
|-
| [[Error Code -2132869117|-2132869117]]
| LabVIEW: (Hex 0x80DF0003) The resource you are deploying is bad.
|-
| [[Error Code -2132869116|-2132869116]]
| LabVIEW: (Hex 0x80DF0004) The item cannot read the assembly.
|-
| [[Error Code -2132869115|-2132869115]]
| LabVIEW: (Hex 0x80DF0005) The item cannot create the assembly handler.
|-
| [[Error Code -2132869114|-2132869114]]
| LabVIEW: (Hex 0x80DF0006) A module cannot load.
|-
| [[Error Code -2132869113|-2132869113]]
| LabVIEW: (Hex 0x80DF0007) The item encountered an invalid pointer argument.
|-
| [[Error Code -2132869112|-2132869112]]
| LabVIEW: (Hex 0x80DF0008) The item cannot be found.
|-
| [[Error Code -2132869111|-2132869111]]
| LabVIEW: (Hex 0x80DF0009) The item is out of memory.
|-
| [[Error Code -2132869110|-2132869110]]
| LabVIEW: (Hex 0x80DF000A) A communication error between the host and target occurred.
|-
| [[Error Code -2132869109|-2132869109]]
| LabVIEW: (Hex 0x80DF000B) The system is in a bad state.
|-
| [[Error Code -2132869108|-2132869108]]
| LabVIEW: (Hex 0x80DF000C) The deploy header is bad.
|-
| [[Error Code -2132869107|-2132869107]]
| LabVIEW: (Hex 0x80DF000D) An unknown error occurred during deployment.
|-
| [[Error Code -2132869106|-2132869106]]
| LabVIEW: (Hex 0x80DF000E) An XML parsing error occurred.
|-
| [[Error Code -2132869105|-2132869105]]
| LabVIEW: (Hex 0x80DF000F) The deployment command failed.
|-
| [[Error Code -2132869104|-2132869104]]
| LabVIEW: (Hex 0x80DF0010) The current deployment operation has a missing dependency.
|-
| [[Error Code -2132869103|-2132869103]]
| LabVIEW: (Hex 0x80DF0011) The item encountered an invalid argument.
|-
| [[Error Code -2132869102|-2132869102]]
| LabVIEW: (Hex 0x80DF0012) The specified file cannot be found.
|-
| [[Error Code -2132869101|-2132869101]]
| LabVIEW: (Hex 0x80DF0013) The deployment operation caused a rollback operation, and the rollback operation failed.
|-
| [[Error Code -2132869100|-2132869100]]
| LabVIEW: (Hex 0x80DF0014) Logging an entry to the rollback log causes an error.
|-
| [[Error Code -2132869099|-2132869099]]
| LabVIEW: (Hex 0x80DF0015) A deployment transaction is in progress.
|-
| [[Error Code -2132869098|-2132869098]]
| LabVIEW: (Hex 0x80DF0016) A deployment transaction has not started.
|-
| [[Error Code -2132869096|-2132869096]]
| LabVIEW: (Hex 0x80DF0018) The deployment operation causes a rollback operation.
|-
| [[Error Code -2132869095|-2132869095]]
| LabVIEW: (Hex 0x80DF0019) The deployment connection timed out.
|-
| [[Error Code -2132869094|-2132869094]]
| LabVIEW: (Hex 0x80DF001A) The current transaction has no items to process.
|-
| [[Error Code -2132869093|-2132869093]]
| LabVIEW: (Hex 0x80DF001B) The current state does not allow the deployment operation.
|-
| [[Error Code -2132869092|-2132869092]]
| LabVIEW: (Hex 0x80DF001C) No items are left to deploy.
|-
| [[Error Code -2132869091|-2132869091]]
| LabVIEW: (Hex 0x80DF001D) No items are left to undeploy.
|-
| [[Error Code -2132869090|-2132869090]]
| LabVIEW: (Hex 0x80DF001E) The deployment plug-in for this item cannot be found. Verify the proper software is installed.
|-
| [[Error Code -2132869089|-2132869089]]
| LabVIEW: (Hex 0x80DF001F) An instance of the target-side deployment endpoint already exists.
|-
| [[Error Code -2132869088|-2132869088]]
| LabVIEW: (Hex 0x80DF0020) This item cannot upload because another item with the same name exists in the project.
|-
| [[Error Code -2067353911|-2067353911]]
| LabVIEW: (Hex 0x84C6AEC9) The data type of a process variable in the EPICS Client I/O server does not match the data type of the corresponding process variable in the IOC.
|-
| [[Error Code -2067353910|-2067353910]]
| LabVIEW: (Hex 0x84C6AECA) The connection to the IOC was lost due to a network failure or an IOC error.
|-
| [[Error Code -2067353909|-2067353909]]
| LabVIEW: (Hex 0x84C6AECB) The EPICS Server I/O Server cannot be deployed because one or more PV source variables do not exist. Open the configuration dialog to check and correct broken source variables.
|}
More to Come


[[Category:Development Environment]]
[[Category:Development Environment]]
[[Category:Error Handling]]

Revision as of 19:26, 16 September 2021

This article is a stub. You can help LabVIEW Wiki by expanding it.
Please improve this article if you can.

Below is a list of every Error Code built into the LabVIEW IDE. This list might not be complete. Clicking on the Error Codes with an attached page will have more information about the error. (If pages exist the link appears blue. If a page does not exist the page appears red.)

Code Message
-2147483638 LabVIEW: (Hex 0x8000000A) The data necessary to complete this operation is not yet available.
-2147467263 LabVIEW: (Hex 0x80004001) Not implemented.

=========================

NI System Configuration: This operation is not implemented for this target or resource.

-2147467262 LabVIEW: (Hex 0x80004002) No such interface supported.
-2147467261 LabVIEW: (Hex 0x80004003) Invalid pointer.

=========================

NI System Configuration: A required pointer parameter was NULL.

-2147467260 LabVIEW: (Hex 0x80004004) Operation aborted.
-2147467259 LabVIEW: (Hex 0x80004005) Unspecified error.

=========================

NI System Configuration: Miscellaneous operation failure.

-2147418113 LabVIEW: (Hex 0x8000FFFF) Catastrophic failure.

=========================

NI System Configuration: A critical unexpected error occurred. Please report this error to NI.

-2147220735 MAX: (Hex 0x80040301) Internal error: The specified class could not be found in the configuration database. Your installation may need to be repaired.
-2147220733 MAX: (Hex 0x80040303) Internal error: The requested object was not found in the configuration database. Please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
-2147220731 MAX: (Hex 0x80040305) Internal error: The attribute does not exist on the class or object. Please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
-2147220730 MAX: (Hex 0x80040306) Internal error: The requested attribute change does not match the type of the attribute. Please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
-2147220727 MAX: (Hex 0x80040309) The client process cannot communicate with the configuration server process. If this problem persists, please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
-2147220725 MAX: (Hex 0x8004030B) Internal error: A client attempted to modify an object that is static or constant or tried to modify a class. Please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
-2147220724 MAX: (Hex 0x8004030C) Internal error: An expected interface was not implemented or was called into incorrectly. Please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
-2147220723 MAX: (Hex 0x8004030D) The specified configuration file is not writeable by the current user. Please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
-2147220721 MAX: (Hex 0x8004030F) The configuration database cannot be opened, possibly due to corruption. Please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
-2147220719 MAX: (Hex 0x80040311) The client process has been disconnected from the configuration server. If this problem persists, please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
-2147220717 MAX: (Hex 0x80040313) The Remote Procedure Call connecting the client to the configuration server failed to be initialized. Your installation may need to be repaired.
-2147220712 MAX: (Hex 0x80040318) Internal error: The client has failed to connect to the configuration server, possibly because the server is too busy or has run into a communication error. Please note the steps you performed that led to this error and contact technical support.
-2147220705 MAX: (Hex 0x8004031F) Internal error: The client failed to reconnect to the remote system. Rebooting the remote system may fix this problem.
-2147220704 MAX: (Hex 0x80040320) Internal error: An unexpected error occurred with the configuration. Please note the steps you performed that led to this error and contact technical support at http://ni.com/support.
-2147220701 MAX: (Hex 0x80040323) Failed to reconnect to the remote system because it appears to be a different one than the one originally connected to. To fix this issue, exit and restart the application.
-2147220699 MAX: (Hex 0x80040325) Failed to load Remote Procedure Call library. Your installation may need to be repaired.
-2147220698 MAX: (Hex 0x80040326) Failed to find Remote Procedure Call library's GUID function. Your installation may need to be repaired.
-2147220697 MAX: (Hex 0x80040327) The string is too long for the export operation to handle.
-2147220695 MAX: (Hex 0x80040329) The system does not have enough free disk space to write to the configuration database. Please free up some disk space and retry the operation.
-2147220694 MAX: (Hex 0x8004032A) Unable to access the configuration database because an incompatible data dictionary has been detected. This error may have been caused by a recently installed component. Note the steps you performed that led to this error and contact technical support at http://ni.com/support.
-2147220693 MAX: (Hex 0x8004032B) The configuration database is not running. Restart your system and try again. Visit ni.com/info and enter the Info Code MAXStoppedServiceError if the problem persists.
-2147220692 MAX: (Hex 0x8004032C) The configuration database exited abnormally. Visit ni.com/info and enter the Info Code MAXTerminatedServiceError if the problem persists.
-2147220691 MAX: (Hex 0x8004032D) The operation timed out while waiting on the configuration database to start. Visit ni.com/info and enter the Info Code MAXServiceNotStartingError if the problem persists.
-2147220690 MAX: (Hex 0x8004032E) The configuration database is not installed on the system. Visit ni.com/info and enter the Info Code MAXServiceNotInstalledError for more information.
-2147220689 MAX: (Hex 0x8004032F) The configuration database encountered an unexpected error. Visit ni.com/info and enter the Info Code MAXSvcLocError for more information.
-2147220688 MAX: (Hex 0x80040330) The configuration database timed out while waiting on a driver. Visit ni.com/info and enter the Info Code MAXGeneralTimeoutError if the problem persists.
-2147220624 NI System Configuration: The property already exists with a different type or value.
-2147220623 NI System Configuration: The property does not exist for this resource.
-2147220622 NI System Configuration: The name of the target or expert contains illegal characters or has an invalid format. Each label of the hostname must be between 1 and 63 characters long, and the entire hostname, including delimiting dots, must be 255 characters or less.
-2147220621 NI System Configuration: Could not contact the System Configuration API at the specified target address. Ensure that the system is online.
-2147220620 NI System Configuration: A specified expert is not installed.
-2147220619 NI System Configuration: The specified resource name does not exist.
-2147220618 NI System Configuration: The specified mode is invalid.
-2147220617 NI System Configuration: The value 'allowAsyncNotification' is TRUE and the attribute is not ready.
-2147220616 NI System Configuration: The NI System Configuration API is not installed at the specified target.
-2147220615 NI System Configuration: You cannot install more than one callback handler per framework instance.
-2147220614 NI System Configuration: The suggested name contains illegal characters.
-2147220613 NI System Configuration: Another resource already has the suggested name.
-2147220612 NI System Configuration: None of the changed properties can be validated.
-2147220611 NI System Configuration: The current user does not have permission for the requested operation.
-2147220610 NI System Configuration: The resource being renamed has dependencies, and the 'updateDependencies' flag was false.
-2147220609 NI System Configuration: A property contained a value that is not valid or is out of range.
-2147220608 NI System Configuration: Multiple properties contained values that are inconsistent with each other.
-2147220607 NI System Configuration: The operation was canceled.
-2147220606 NI System Configuration: Could not parse the response from the NI System Configuration API at the specified target address.
-2147220605 NI System Configuration: The resource name is valid but the operation requires the resource to be present.
-2147220604 NI System Configuration: The resource name is valid but the operation is not supported on simulated resources.
-2147220603 NI System Configuration: The resource requires being in the firmware update state to perform this operation.
-2147220602 NI System Configuration: The uploaded firmware image does not work with this resource.
-2147220601 NI System Configuration: The uploaded firmware image is corrupt or incomplete.
-2147220600 NI System Configuration: The specified firmware version does not exist.
-2147220599 NI System Configuration: The specified firmware version is older than what is currently installed.
-2147220598 NI System Configuration: The username or password is incorrect.
-2147220597 NI System Configuration: The specified firmware was not successfully installed. See the output parameters for more information.
-2147220596 NI System Configuration: The data could not be encrypted.
-2147220595 NI System Configuration: The changes were not saved. Some of the modified properties were not validated because they do not apply to this item.
-2147220594 NI System Configuration: The calibration password is incorrect.
-2147220593 NI System Configuration: Could not delete the specified resource because it is present.
-2147220592 NI System Configuration: Failed transmitting data to or from the web server at the specified target address.
-2147220591 NI System Configuration: The NI System Configuration API at the specified target address could not decrypt the data.
-2147220590 NI System Configuration: The specified firmware requires a newer version of the expert than what is currently installed.
-2147220589 NI System Configuration: There was uncertainty regarding what action to take during an import.
-2147220588 NI System Configuration: A required item could not be imported.
-2147220587 NI System Configuration: Could not perform the specified operation because the item is currently in use.
-2147220586 NI System Configuration: Could not perform the specified operation because the item type is unknown or not supported.
-2147220560 NI System Configuration: Unable to write to file or folder. Permission denied.
-2147220559 NI System Configuration: Unable to connect to the specified system. Ensure that the system is online.
-2147220558 NI System Configuration: Error running transform to generate report
-2147220557 NI System Configuration: Unable to find NI MAX on the system. Please reinstall.
-2147220556 NI System Configuration: Unexpected error launching nimax.exe
-2147220555 NI System Configuration: Launched nimax.exe but it did not complete in a reasonable time.
-2147220554 NI System Configuration: Unable to find XSL transform to generate report
-2147220553 NI System Configuration: Incorrect report file extension provided
-2147220552 NI System Configuration: Report file is read-only. Unable to generate report.
-2147220551 NI System Configuration: Report file exists and the NIMAX_FailIfOverwritingReport flag was set
-2147220550 NI System Configuration: Error creating directory for report files
-2147220480 NI System Configuration: Error opening a file
-2147220479 NI System Configuration: The object cannot be accessed because of insufficient permissions
-2147220478 NI System Configuration: Error with the object copier
-2147220477 NI System Configuration: Error performing a file operation
-2147220476 NI System Configuration: Names from one expert have collided with another expert
-2147220475 NI System Configuration: Unexpected error has occurred
-2147220474 NI System Configuration: The expert requested its stream for import but one does not exist because it did not export a stream.
-2147220473 NI System Configuration: Error compressing or decompressing file
-2147220472 NI System Configuration: Error reading from a stream
-2147220471 NI System Configuration: Error writing to a stream
-2147220470 NI System Configuration: Error seeking to a position in a stream
-2147220469 NI System Configuration: Repository not ready to be exported
-2147220468 NI System Configuration: The file or stream chosen to import the repository from is not a valid repository
-2147220467 NI System Configuration: The repository was exported with a newer version of MAX than what is on the importing machine
-2147220466 NI System Configuration: The import storage could not be opened
-2147220465 NI System Configuration: The export storage could not be created
-2147220464 NI System Configuration: The object copier could not be created
-2147220463 NI System Configuration: A copy operation is already in progress
-2147220462 NI System Configuration: The custom file does not belong to a given expert
-2147220461 NI System Configuration: A specified system is not supported by this expert.
-2147220460 NI System Configuration: A specified system is presumably supported, but network errors prevent connection.
-2147220459 NI System Configuration: The product is not installed on the specified system.
-2147220458 NI System Configuration: The product is installed on the remote system, but is too old
-2147220457 NI System Configuration: The product is installed on the remote system, but is too new
-2147220456 NI System Configuration: The import data is too old. The product is not backward-compatible with this data.
-2147220455 NI System Configuration: The import data is too new. The product is not forward-compatible with this data.
-2147220454 NI System Configuration: The operation failed because no source items were specified
-2147220453 NI System Configuration: The operation failed because some items were orphans
-2147220452 NI System Configuration: The operation failed because some items were in-edit and not saved
-2147220451 NI System Configuration: The operation failed because it would overwrite a file
-2147220450 NI System Configuration: The operation failed because it would overwrite items.
-2147220449 NI System Configuration: The operation failed because of missing dependency items.
-2147220448 NI System Configuration: The operation timed out.
-2147220447 NI System Configuration: The operation was canceled by the client
-2147220446 NI System Configuration: The operation failed because of warning conflicts
-2147220445 NI System Configuration: The operation failed because of general conflicts.
-2147220444 NI System Configuration: The operation failed because of unresolved conflicts requiring user input
-2147220443 NI System Configuration: An expert is not ready to accept the specified source or destination, but may become ready in the future
-2147220442 NI System Configuration: The operation failed because some files were orphans
-2147220441 NI System Configuration: Caller called a non-const method on an object that is logically const
-2147220440 NI System Configuration: A product does not support the attempted copy mode (e.g. merge to file, etc)
-2147220388 NI System Configuration: The image you are applying is not supported by the boot flow installed on the target. Boot flow migration is not supported when running locally.
-2147220387 NI System Configuration: The image you are applying is not supported by the boot flow installed on the target. Make sure the target has access to ni.com or install boot flow migration support packages on the host.
-2147220386 NI System Configuration: You must allow the target to reboot to perform the specified operation.
-2147220385 NI System Configuration: The target requires newer functionality not supported by the software on your computer. Update NI System Configuration to the latest version to configure this target. See www.ni.com/r/rtconfigerror for more information.
-2147220384 NI System Configuration: Running 'opkg update' failed to access at least one enabled feed. Consider disabling unnecessary feeds.
-2147220383 NI System Configuration: The specified software feed was not found.
-2147220382 NI System Configuration: Could not add the specified software feed because it already exists.
-2147220381 NI System Configuration: The target does not support one of the specified installation options.
-2147220380 NI System Configuration: The target does not include the functionality this operation requires. Update the firmware to the latest version.
-2147220379 NI System Configuration: The target does not include the functionality this operation requires. Update the software to the latest version.
-2147220378 NI System Configuration: SSH must be enabled on the target.
-2147220377 NI System Configuration: Could not parse the response from opkg at the specified target address.
-2147220376 NI System Configuration: The specified software set is the wrong type for this operation.
-2147220375 NI System Configuration: The target requires using opkg to modify installed software.
-2147220374 NI System Configuration: Disk encryption is not supported by the target.
-2147220373 NI System Configuration: Could not find a device suitable for storing the encrypted disk recovery key. Format a USB drive with the appropriate filesystem label and insert it into the target.
-2147220372 NI System Configuration: To restart your system, either specify 'localhost' on the front panel for Session in, or call Initialize Session first.
-2147220371 NI System Configuration: The image is corrupt or the file type is invalid.
-2147220370 NI System Configuration: Can only perform this action in safe or install mode, and the 'auto restart' flag was false.
-2147220369 NI System Configuration: The encryption passphrase when applying an image was not the same as when the image was created.
-2147220368 NI System Configuration: The IP address is invalid.
-2147220367 NI System Configuration: The gateway address is invalid.
-2147220366 NI System Configuration: The DNS server address is invalid.
-2147220365 NI System Configuration: The subnet mask is invalid.
-2147220364 NI System Configuration: Command is not supported by given protocol.
-2147220363 NI System Configuration: Remote system replied with failure to config command.
-2147220362 NI System Configuration: The remote system is locked. A password is required to configure.
-2147220361 NI System Configuration: Password supplied for operation is invalid.
-2147220360 NI System Configuration: The remote device is not configurable for some reason other than password.
-2147220359 NI System Configuration: Failed to unlock the system.
-2147220358 NI System Configuration: Failed to lock the system.
-2147220357 NI System Configuration: General installation failure.
-2147220356 NI System Configuration: Installation files were corrupt or not found in the repository.
-2147220355 NI System Configuration: The installation file is empty.
-2147220354 NI System Configuration: The system must have a valid IP address before certain operations such as installation. The IP address cannot be 0.0.0.0.
-2147220352 NI System Configuration: General install error.
-2147220350 NI System Configuration: Installation to the specified target has already begun. Multiple installations are not allowed at the same time.
-2147220349 NI System Configuration: Remote action aborted.
-2147220338 NI System Configuration: Hard drive on the remote system is either full or encountered an I/O error.
-2147220337 NI System Configuration: Hard drive format failed. The disk on the target may be unrecoverable.
-2147220336 NI System Configuration: System must be in safe mode before attempting a hard drive format. Restart the target into safe mode and attempt the command again.
-2147220335 NI System Configuration: System failed to restart after the hard drive was formatted. The system is in an unknown state. You may have to manually restart the target.
-2147220334 NI System Configuration: The server refused the network connection.
-2147220331 NI System Configuration: Failed to get one or more files while creating system image. The image is incomplete or invalid.
-2147220330 NI System Configuration: Failed to put one or more files while applying system image. The system may be in a corrupt state.
-2147220329 NI System Configuration: The specified path does not contain a valid image.
-2147220328 NI System Configuration: The image is for a different device class and is incompatible with the target.
-2147220327 NI System Configuration: The image was not created from the specified target.
-2147220326 NI System Configuration: The requested file system is not supported on the specified target.
-2147220325 NI System Configuration: The specified target does not support custom software installations.
-2147220324 NI System Configuration: A file transfer error (FTP or WebDAV) occurred.
-2147220323 NI System Configuration: Operation timed out.
-2147220322 NI System Configuration: The specified file was not found.
-2147220321 NI System Configuration: The specified directory was not found.
-2147220320 NI System Configuration: The specified file or directory path was not found.
-2147220319 NI System Configuration: No software is available for installation to this target.
-2147220318 NI System Configuration: The file or directory exists and the overwrite flag was false.
-2147220317 NI System Configuration: The target was not formatted because the option to keep configuration after a format is supported only for targets on the local subnet. To format the target, repeat the operation without requesting to keep the configuration.
-2147220316 NI System Configuration: Filename or pathname is longer than what the server supports.
-2147220315 NI System Configuration: Failed when communicating with the system. This issue is usually caused by a high latency in the network. Refer to KnowledgeBase article 42GH3O00 on ni.com for possible solutions.
-2147220314 NI System Configuration: The operation failed because of insufficient permissions.
-2147220313 NI System Configuration: The operation failed because the path already exists.
-2147220312 NI System Configuration: The execution of an external command, script, or application failed.
-2147220311 NI System Configuration: Failed to download the file from the 'RT Images' repository.
-2147220309 NI System Configuration: Failure to send command.
-2147220308 NI System Configuration: Could not contact remote target. Ensure that the system is online.
-2147220307 NI System Configuration: Could not access network.
-2147220306 NI System Configuration: Command was not confirmed, result of operation is uncertain.
-2147220305 NI System Configuration: Hostname could not be resolved by DNS.
-2147220304 NI System Configuration: Timeout while waiting for restart. The system is offline.
-2147220303 NI System Configuration: The sending new configuration operation returned a failure. However, the operation might not have failed.
-2147220300 NI System Configuration: Cannot install more than one startup component.
-2147220299 NI System Configuration: Invalid argument.
-2147220298 NI System Configuration: Cannot uninstall a specified software component from the target because there are dependencies.
-2147220297 NI System Configuration: Cannot install multiple packages of the same component.
-2147220296 NI System Configuration: Cannot install a specified software component to the target because there are dependencies.
-2147220295 NI System Configuration: A specified software component is incompatible with this target.
-2147220294 NI System Configuration: A specified software component is incompatible with this target's operating system.
-2147220293 NI System Configuration: A firmware update is required before installing.
-2147220292 NI System Configuration: Cannot open file or folder.
-2147220291 NI System Configuration: Duplicate or missing components on target installation.
-2147220290 NI System Configuration: Buffer overflow, size is too small.
-2147220289 NI System Configuration: The software installed on the target uses a CDF format not supported by the software on your computer. Update NI System Configuration or NI MAX to the latest version to configure this target.
-2147220288 NI System Configuration: The specified software set or base system image cannot be installed to the target because it is invalid or cannot be found.
-2147220287 NI System Configuration: The specified software set definition is incomplete and cannot be installed to the target. Some hidden dependencies were added.
-2147220286 NI System Configuration: One or more software set items could not be found in the repository.
-2147220285 NI System Configuration: There is a top-level hidden component installed.
-2147220284 NI System Configuration: A component was passed in that is not an installable add-on. It may be an unknown ID, a defined item that is not an add-on, a missing add-on, or a non-installable add-on.
-2147220283 NI System Configuration: Could not find the 'RT Images' repository location.
-2147220282 NI System Configuration: Could not read the 'RT Images' registry key.
-2147220281 NI System Configuration: Could not find the rts2cdf conversion utility.
-2147220280 NI System Configuration: The operating system is not supported.
-2147220279 NI System Configuration: Unspecified version while trying to install exact version of a component.
-2147220278 NI System Configuration: Unsupported MAC address format. Supply the MAC address as a colon separated string of characters instead of Hex display.
-2147220277 NI System Configuration: A component was passed in that is not a startup.
-2147024891 LabVIEW: (Hex 0x80070005) Access denied. This error can occur if you attempt to write a single writer shared variable that is already connected to a subscriber with write access. Ensure that you connect only one target with write access to this shared variable at a time.
-2147024890 LabVIEW: (Hex 0x80070006) Invalid handle.
-2147024882 LabVIEW: (Hex 0x8007000E) Ran out of memory.

=========================

NI System Configuration: Out of memory.

-2147024809 LabVIEW: (Hex 0x80070057) One or more arguments are invalid.

=========================

NI System Configuration: Invalid parameter.

-2132869120 LabVIEW: (Hex 0x80DF0000) The assembly you are deploying is bad.
-2132869119 LabVIEW: (Hex 0x80DF0001) The assembly handler does not support the sent command.
-2132869118 LabVIEW: (Hex 0x80DF0002) A file I/O error occurred.
-2132869117 LabVIEW: (Hex 0x80DF0003) The resource you are deploying is bad.
-2132869116 LabVIEW: (Hex 0x80DF0004) The item cannot read the assembly.
-2132869115 LabVIEW: (Hex 0x80DF0005) The item cannot create the assembly handler.
-2132869114 LabVIEW: (Hex 0x80DF0006) A module cannot load.
-2132869113 LabVIEW: (Hex 0x80DF0007) The item encountered an invalid pointer argument.
-2132869112 LabVIEW: (Hex 0x80DF0008) The item cannot be found.
-2132869111 LabVIEW: (Hex 0x80DF0009) The item is out of memory.
-2132869110 LabVIEW: (Hex 0x80DF000A) A communication error between the host and target occurred.
-2132869109 LabVIEW: (Hex 0x80DF000B) The system is in a bad state.
-2132869108 LabVIEW: (Hex 0x80DF000C) The deploy header is bad.
-2132869107 LabVIEW: (Hex 0x80DF000D) An unknown error occurred during deployment.
-2132869106 LabVIEW: (Hex 0x80DF000E) An XML parsing error occurred.
-2132869105 LabVIEW: (Hex 0x80DF000F) The deployment command failed.
-2132869104 LabVIEW: (Hex 0x80DF0010) The current deployment operation has a missing dependency.
-2132869103 LabVIEW: (Hex 0x80DF0011) The item encountered an invalid argument.
-2132869102 LabVIEW: (Hex 0x80DF0012) The specified file cannot be found.
-2132869101 LabVIEW: (Hex 0x80DF0013) The deployment operation caused a rollback operation, and the rollback operation failed.
-2132869100 LabVIEW: (Hex 0x80DF0014) Logging an entry to the rollback log causes an error.
-2132869099 LabVIEW: (Hex 0x80DF0015) A deployment transaction is in progress.
-2132869098 LabVIEW: (Hex 0x80DF0016) A deployment transaction has not started.
-2132869096 LabVIEW: (Hex 0x80DF0018) The deployment operation causes a rollback operation.
-2132869095 LabVIEW: (Hex 0x80DF0019) The deployment connection timed out.
-2132869094 LabVIEW: (Hex 0x80DF001A) The current transaction has no items to process.
-2132869093 LabVIEW: (Hex 0x80DF001B) The current state does not allow the deployment operation.
-2132869092 LabVIEW: (Hex 0x80DF001C) No items are left to deploy.
-2132869091 LabVIEW: (Hex 0x80DF001D) No items are left to undeploy.
-2132869090 LabVIEW: (Hex 0x80DF001E) The deployment plug-in for this item cannot be found. Verify the proper software is installed.
-2132869089 LabVIEW: (Hex 0x80DF001F) An instance of the target-side deployment endpoint already exists.
-2132869088 LabVIEW: (Hex 0x80DF0020) This item cannot upload because another item with the same name exists in the project.
-2067353911 LabVIEW: (Hex 0x84C6AEC9) The data type of a process variable in the EPICS Client I/O server does not match the data type of the corresponding process variable in the IOC.
-2067353910 LabVIEW: (Hex 0x84C6AECA) The connection to the IOC was lost due to a network failure or an IOC error.
-2067353909 LabVIEW: (Hex 0x84C6AECB) The EPICS Server I/O Server cannot be deployed because one or more PV source variables do not exist. Open the configuration dialog to check and correct broken source variables.

More to Come

Retrieved from "https://labviewwiki.org/w/index.php?title=List_of_errors&oldid=31243"