NI PXI Routing Matrix Error Code Family: Difference between revisions
Added page |
m Remove redlinks for individual error code pages. |
||
| Line 5: | Line 5: | ||
! Description | ! Description | ||
|- | |- | ||
| | | -1074101707 | ||
| Version check error. The trigger routing topography on the FPGA is too old. Upgrade your firmware, or recompile your FPGA bitfile with a newer version of the trigger routing topography. | | Version check error. The trigger routing topography on the FPGA is too old. Upgrade your firmware, or recompile your FPGA bitfile with a newer version of the trigger routing topography. | ||
|- | |- | ||
| | | -1074101706 | ||
| Version check error. The trigger routing topography on the FPGA is too new. Upgrade your software, or use a compatible FPGA bitfile. | | Version check error. The trigger routing topography on the FPGA is too new. Upgrade your software, or use a compatible FPGA bitfile. | ||
|- | |- | ||
| | | -1074101705 | ||
| The FPGA reported an unknown routing topography identifier, which is not supported by the driver. | | The FPGA reported an unknown routing topography identifier, which is not supported by the driver. | ||
|- | |- | ||
| | | -1074101704 | ||
| Internal software error. The number of terminals specified in FPGA bitfile is not supported by the driver. | | Internal software error. The number of terminals specified in FPGA bitfile is not supported by the driver. | ||
|- | |- | ||
| | | -1074101703 | ||
| Device timed out while waiting for output enable to settle. | | Device timed out while waiting for output enable to settle. | ||
|- | |- | ||
| | | -1074101702 | ||
| Internal software error. Requested address is outside PXI trigger routing address space. | | Internal software error. Requested address is outside PXI trigger routing address space. | ||
|- | |- | ||
| | | -1074101701 | ||
| Internal software error. Requested address is outside register port window. | | Internal software error. Requested address is outside register port window. | ||
|- | |- | ||
| | | -1074101700 | ||
| Software for trigger routing is too old compared to the FPGA bitfile. Update driver. | | Software for trigger routing is too old compared to the FPGA bitfile. Update driver. | ||
|- | |- | ||
| | | -1074101699 | ||
| Revision for trigger routing component(s) on the FPGA bitfile is too old. Update bitfile. | | Revision for trigger routing component(s) on the FPGA bitfile is too old. Update bitfile. | ||
|- | |- | ||
| | | -1074101698 | ||
| An invalid topography base address was found on FPGA bitfile. | | An invalid topography base address was found on FPGA bitfile. | ||
|- | |- | ||
| | | -1074101697 | ||
| FPGA bitfile loaded on device does not contain the necessary components for trigger routing. | | FPGA bitfile loaded on device does not contain the necessary components for trigger routing. | ||
|} | |} | ||
[[Category:Error Handling]] | [[Category:Error Handling]] | ||
Latest revision as of 16:01, 7 May 2023
Below are all of the Error Codes that belong to the NI PXI Routing Matrix Error Code Family (see Error List for list of Families).
| Code | Description |
|---|---|
| -1074101707 | Version check error. The trigger routing topography on the FPGA is too old. Upgrade your firmware, or recompile your FPGA bitfile with a newer version of the trigger routing topography. |
| -1074101706 | Version check error. The trigger routing topography on the FPGA is too new. Upgrade your software, or use a compatible FPGA bitfile. |
| -1074101705 | The FPGA reported an unknown routing topography identifier, which is not supported by the driver. |
| -1074101704 | Internal software error. The number of terminals specified in FPGA bitfile is not supported by the driver. |
| -1074101703 | Device timed out while waiting for output enable to settle. |
| -1074101702 | Internal software error. Requested address is outside PXI trigger routing address space. |
| -1074101701 | Internal software error. Requested address is outside register port window. |
| -1074101700 | Software for trigger routing is too old compared to the FPGA bitfile. Update driver. |
| -1074101699 | Revision for trigger routing component(s) on the FPGA bitfile is too old. Update bitfile. |
| -1074101698 | An invalid topography base address was found on FPGA bitfile. |
| -1074101697 | FPGA bitfile loaded on device does not contain the necessary components for trigger routing. |