LabVIEW WSN Error Code Family: Difference between revisions

Latest revision as of 15:45, 7 May 2023

Below are all of the Error Codes that belong to the LabVIEW WSN Error Code Family (see Error List for list of Families).

Code	Description
-25399	LabVIEW WSN: (Hex 0xFFFF9CC9) The last LV WSN Error. Turn back, padawan, there is no where else to go.
-25339	LabVIEW WSN: (Hex 0xFFFF9D05) You must enable the serial port receiver power before calling this function, or no new data can be read.
-25338	LabVIEW WSN: (Hex 0xFFFF9D06) The device does not support reading or writing the specified number of bytes from the serial port at one time.
-25337	LabVIEW WSN: (Hex 0xFFFF9D07) The specified number of bytes cannot be read or written within the specified timeout.
-25336	LabVIEW WSN: (Hex 0xFFFF9D08) The specified serial port configuration is unsupported on this device.
-25327	LabVIEW WSN: (Hex 0xFFFF9D11) Not enough user RAM.
-25326	LabVIEW WSN: (Hex 0xFFFF9D12) Invalid user RAM refnum.
-25325	LabVIEW WSN: (Hex 0xFFFF9D13) Verification of user memory failed.
-25324	LabVIEW WSN: (Hex 0xFFFF9D14) Failed to write to user memory.
-25323	LabVIEW WSN: (Hex 0xFFFF9D15) Failed to write to user memory because the location is not empty.
-25322	LabVIEW WSN: (Hex 0xFFFF9D16) User memory out of bounds. The operation specified a location outside the user memory sector.
-25321	LabVIEW WSN: (Hex 0xFFFF9D17) Failed to erase the specified user memory sector.
-25320	LabVIEW WSN: (Hex 0xFFFF9D18) Null pointer exception.
-25313	LabVIEW WSN: (Hex 0xFFFF9D1F) Internal error: Hardware failure.
-25312	LabVIEW WSN: (Hex 0xFFFF9D20) The node is not connected.
-25311	LabVIEW WSN: (Hex 0xFFFF9D21) Invalid argument.
-25310	LabVIEW WSN: (Hex 0xFFFF9D22) User message missed.
-25309	LabVIEW WSN: (Hex 0xFFFF9D23) Radio failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support.
-25308	LabVIEW WSN: (Hex 0xFFFF9D24) Flash failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support.
-25307	LabVIEW WSN: (Hex 0xFFFF9D25) Command queue overflow: An internal error has occurred. Please contact National Instruments technical support at ni.com/support.
-25306	LabVIEW WSN: (Hex 0xFFFF9D26) Digital output line failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support.
-25305	LabVIEW WSN: (Hex 0xFFFF9D27) ADC failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support.
-25304	LabVIEW WSN: (Hex 0xFFFF9D28) CJC failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support.
-25303	LabVIEW WSN: (Hex 0xFFFF9D29) SPI communication failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support.
-25302	LabVIEW WSN: (Hex 0xFFFF9D2A) Serial receiving failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support.
-25301	LabVIEW WSN: (Hex 0xFFFF9D2B) Serial transmission failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support.
-25300	LabVIEW WSN: (Hex 0xFFFF9D2C) An internal error has occurred in the LabVIEW Wireless Sensor Network Module. Please contact National Instruments technical support at ni.com/support.
-25283	LabVIEW WSN: (Hex 0xFFFF9D3D) The node ID does not exist in the gateway's node table.
-25282	LabVIEW WSN: (Hex 0xFFFF9D3E) Invalid message reference.
-25281	LabVIEW WSN: (Hex 0xFFFF9D3F) Invalid node reference.
-25280	LabVIEW WSN: (Hex 0xFFFF9D40) Invalid gateway reference.
-25254	LabVIEW WSN: (Hex 0xFFFF9D5A) Connection timed out. Gateway might be in a bad state.
-25253	LabVIEW WSN: (Hex 0xFFFF9D5B) Double interface registration: An internal error has occurred. Please contact National Instruments technical support at ni.com/support.
-25252	LabVIEW WSN: (Hex 0xFFFF9D5C) Incompatible or corrupted data was received from the gateway.
-25251	LabVIEW WSN: (Hex 0xFFFF9D5D) Memory error. Unable to deallocate used memory.
-25250	LabVIEW WSN: (Hex 0xFFFF9D5E) Memory allocation failed.
-25230	LabVIEW WSN: (Hex 0xFFFF9D72) The request processor failed to deserialize a request. This error can occur if protocol versions are incompatible or data is corrupt.
-25229	LabVIEW WSN: (Hex 0xFFFF9D73) The request processor failed to deserialize a request. This error can occur if protocol versions are incompatible.
-25228	LabVIEW WSN: (Hex 0xFFFF9D74) The request terminated due to an unhandled exception.
-25227	LabVIEW WSN: (Hex 0xFFFF9D75) Memory allocation failed.
-25226	LabVIEW WSN: (Hex 0xFFFF9D76) The client was denied access.
-25225	LabVIEW WSN: (Hex 0xFFFF9D77) The client aborted the connection.
-25224	LabVIEW WSN: (Hex 0xFFFF9D78) Network communication failed.
-25223	LabVIEW WSN: (Hex 0xFFFF9D79) Connection timed out.
-25222	LabVIEW WSN: (Hex 0xFFFF9D7A) Unable to connect to the named service.
-25221	LabVIEW WSN: (Hex 0xFFFF9D7B) Unable to connect to the named gateway.
-25220	LabVIEW WSN: (Hex 0xFFFF9D7C) Generic connection error.
-25200	LabVIEW WSN: (Hex 0xFFFF9D90) First LV WSN Error
21100	LabVIEW WSN: (Hex 0x526C) First LV WSN Warning
21240	LabVIEW WSN: (Hex 0x52F8) The serial port receiver received a break condition on the line.
21241	LabVIEW WSN: (Hex 0x52F9) The specified number of bytes were read from the serial port before the specified termination string was detected.
21299	LabVIEW WSN: (Hex 0x5333) The last LV WSN Warning.

@@ Line 5: / Line 5: @@
 ! Description
 |-
-| [[Error Code -25399|-25399]]
+| -25399
 | LabVIEW WSN: (Hex 0xFFFF9CC9) The last LV WSN Error. Turn back, padawan, there is no where else to go.
 |-
-| [[Error Code -25339|-25339]]
+| -25339
 | LabVIEW WSN: (Hex 0xFFFF9D05) You must enable the serial port receiver power before calling this function, or no new data can be read.
 |-
-| [[Error Code -25338|-25338]]
+| -25338
 | LabVIEW WSN: (Hex 0xFFFF9D06) The device does not support reading or writing the specified number of bytes from the serial port at one time.
 |-
-| [[Error Code -25337|-25337]]
+| -25337
 | LabVIEW WSN: (Hex 0xFFFF9D07) The specified number of bytes cannot be read or written within the specified timeout.
 |-
-| [[Error Code -25336|-25336]]
+| -25336
 | LabVIEW WSN: (Hex 0xFFFF9D08) The specified serial port configuration is unsupported on this device.
 |-
-| [[Error Code -25327|-25327]]
+| -25327
 | LabVIEW WSN: (Hex 0xFFFF9D11) Not enough user RAM.
 |-
-| [[Error Code -25326|-25326]]
+| -25326
 | LabVIEW WSN: (Hex 0xFFFF9D12) Invalid user RAM refnum.
 |-
-| [[Error Code -25325|-25325]]
+| -25325
 | LabVIEW WSN: (Hex 0xFFFF9D13) Verification of user memory failed.
 |-
-| [[Error Code -25324|-25324]]
+| -25324
 | LabVIEW WSN: (Hex 0xFFFF9D14) Failed to write to user memory.
 |-
-| [[Error Code -25323|-25323]]
+| -25323
 | LabVIEW WSN: (Hex 0xFFFF9D15) Failed to write to user memory because the location is not empty.
 |-
-| [[Error Code -25322|-25322]]
+| -25322
 | LabVIEW WSN: (Hex 0xFFFF9D16) User memory out of bounds. The operation specified a location outside the user memory sector.
 |-
-| [[Error Code -25321|-25321]]
+| -25321
 | LabVIEW WSN: (Hex 0xFFFF9D17) Failed to erase the specified user memory sector.
 |-
-| [[Error Code -25320|-25320]]
+| -25320
 | LabVIEW WSN: (Hex 0xFFFF9D18) Null pointer exception.
 |-
-| [[Error Code -25313|-25313]]
+| -25313
 | LabVIEW WSN: (Hex 0xFFFF9D1F) Internal error: Hardware failure.
 |-
-| [[Error Code -25312|-25312]]
+| -25312
 | LabVIEW WSN: (Hex 0xFFFF9D20) The node is not connected.
 |-
-| [[Error Code -25311|-25311]]
+| -25311
 | LabVIEW WSN: (Hex 0xFFFF9D21) Invalid argument.
 |-
-| [[Error Code -25310|-25310]]
+| -25310
 | LabVIEW WSN: (Hex 0xFFFF9D22) User message missed.
 |-
-| [[Error Code -25309|-25309]]
+| -25309
 | LabVIEW WSN: (Hex 0xFFFF9D23) Radio failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support.
 |-
-| [[Error Code -25308|-25308]]
+| -25308
 | LabVIEW WSN: (Hex 0xFFFF9D24) Flash failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support.
 |-
-| [[Error Code -25307|-25307]]
+| -25307
 | LabVIEW WSN: (Hex 0xFFFF9D25) Command queue overflow: An internal error has occurred. Please contact National Instruments technical support at ni.com/support.
 |-
-| [[Error Code -25306|-25306]]
+| -25306
 | LabVIEW WSN: (Hex 0xFFFF9D26) Digital output line failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support.
 |-
-| [[Error Code -25305|-25305]]
+| -25305
 | LabVIEW WSN: (Hex 0xFFFF9D27) ADC failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support.
 |-
-| [[Error Code -25304|-25304]]
+| -25304
 | LabVIEW WSN: (Hex 0xFFFF9D28) CJC failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support.
 |-
-| [[Error Code -25303|-25303]]
+| -25303
 | LabVIEW WSN: (Hex 0xFFFF9D29) SPI communication failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support.
 |-
-| [[Error Code -25302|-25302]]
+| -25302
 | LabVIEW WSN: (Hex 0xFFFF9D2A) Serial receiving failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support.
 |-
-| [[Error Code -25301|-25301]]
+| -25301
 | LabVIEW WSN: (Hex 0xFFFF9D2B) Serial transmission failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support.
 |-
-| [[Error Code -25300|-25300]]
+| -25300
 | LabVIEW WSN: (Hex 0xFFFF9D2C) An internal error has occurred in the LabVIEW Wireless Sensor Network Module. Please contact National Instruments technical support at ni.com/support.
 |-
-| [[Error Code -25283|-25283]]
+| -25283
 | LabVIEW WSN: (Hex 0xFFFF9D3D) The node ID does not exist in the gateway's node table.
 |-
-| [[Error Code -25282|-25282]]
+| -25282
 | LabVIEW WSN: (Hex 0xFFFF9D3E) Invalid message reference.
 |-
-| [[Error Code -25281|-25281]]
+| -25281
 | LabVIEW WSN: (Hex 0xFFFF9D3F) Invalid node reference.
 |-
-| [[Error Code -25280|-25280]]
+| -25280
 | LabVIEW WSN: (Hex 0xFFFF9D40) Invalid gateway reference.
 |-
-| [[Error Code -25254|-25254]]
+| -25254
 | LabVIEW WSN: (Hex 0xFFFF9D5A) Connection timed out. Gateway might be in a bad state.
 |-
-| [[Error Code -25253|-25253]]
+| -25253
 | LabVIEW WSN: (Hex 0xFFFF9D5B) Double interface registration: An internal error has occurred. Please contact National Instruments technical support at ni.com/support.
 |-
-| [[Error Code -25252|-25252]]
+| -25252
 | LabVIEW WSN: (Hex 0xFFFF9D5C) Incompatible or corrupted data was received from the gateway.
 |-
-| [[Error Code -25251|-25251]]
+| -25251
 | LabVIEW WSN: (Hex 0xFFFF9D5D) Memory error. Unable to deallocate used memory.
 |-
-| [[Error Code -25250|-25250]]
+| -25250
 | LabVIEW WSN: (Hex 0xFFFF9D5E) Memory allocation failed.
 |-
-| [[Error Code -25230|-25230]]
+| -25230
 | LabVIEW WSN: (Hex 0xFFFF9D72) The request processor failed to deserialize a request. This error can occur if protocol versions are incompatible or data is corrupt.
 |-
-| [[Error Code -25229|-25229]]
+| -25229
 | LabVIEW WSN: (Hex 0xFFFF9D73) The request processor failed to deserialize a request. This error can occur if protocol versions are incompatible.
 |-
-| [[Error Code -25228|-25228]]
+| -25228
 | LabVIEW WSN: (Hex 0xFFFF9D74) The request terminated due to an unhandled exception.
 |-
-| [[Error Code -25227|-25227]]
+| -25227
 | LabVIEW WSN: (Hex 0xFFFF9D75) Memory allocation failed.
 |-
-| [[Error Code -25226|-25226]]
+| -25226
 | LabVIEW WSN: (Hex 0xFFFF9D76) The client was denied access.
 |-
-| [[Error Code -25225|-25225]]
+| -25225
 | LabVIEW WSN: (Hex 0xFFFF9D77) The client aborted the connection.
 |-
-| [[Error Code -25224|-25224]]
+| -25224
 | LabVIEW WSN: (Hex 0xFFFF9D78) Network communication failed.
 |-
-| [[Error Code -25223|-25223]]
+| -25223
 | LabVIEW WSN: (Hex 0xFFFF9D79) Connection timed out.
 |-
-| [[Error Code -25222|-25222]]
+| -25222
 | LabVIEW WSN: (Hex 0xFFFF9D7A) Unable to connect to the named service.
 |-
-| [[Error Code -25221|-25221]]
+| -25221
 | LabVIEW WSN: (Hex 0xFFFF9D7B) Unable to connect to the named gateway.
 |-
-| [[Error Code -25220|-25220]]
+| -25220
 | LabVIEW WSN: (Hex 0xFFFF9D7C) Generic connection error.
 |-
-| [[Error Code -25200|-25200]]
+| -25200
 | LabVIEW WSN: (Hex 0xFFFF9D90) First LV WSN Error
 |-
-| [[Error Code 21100|21100]]
+| 21100
 | LabVIEW WSN: (Hex 0x526C) First LV WSN Warning
 |-
-| [[Error Code 21240|21240]]
+| 21240
 | LabVIEW WSN: (Hex 0x52F8) The serial port receiver received a break condition on the line.
 |-
-| [[Error Code 21241|21241]]
+| 21241
 | LabVIEW WSN: (Hex 0x52F9) The specified number of bytes were read from the serial port before the specified termination string was detected.
 |-
-| [[Error Code 21299|21299]]
+| 21299
 | LabVIEW WSN: (Hex 0x5333) The last LV WSN Warning.
 |}
 [[Category:Error Handling]]