NI Instr CLIP Adapters Error Code Family: Difference between revisions
Added page |
(No difference)
|
Revision as of 02:54, 20 September 2021
Below are all of the Error Codes that belong to the NI Instr CLIP Adapters Error Code Family (see Error List for list of Families).
| Code | Description |
|---|---|
| -250514 | An AXI4-Lite address map element cannot fit in the specified address collection. Make sure that each address map elements' offset plus size does not exceed the address collection's total size. |
| -250513 | TUSER's size and its specified width do not match. Check that you have connected the TUSER input, and that it is the proper size. |
| -250512 | TKEEP's size and its specified width do not match. Check that you have connected the TKEEP input, and that it is the proper size. |
| -250511 | TSTRB's size and its specified width do not match. Check that you have connected the TSTRB input, and that it is the proper size. |
| -250510 | TDATA's size and its specified width do not match. Check that you have connected the TDATA input, and that it is the proper size. |
| -250504 | If TUSER is not enabled, you cannot wire anything to it. |
| -250503 | If TKEEP is not enabled, you cannot wire anything to it. |
| -250502 | If TSTRB is not enabled, you cannot wire anything to it. |
| -250501 | You must enable TLAST in order for AXI4-Stream to work. |
| -250500 | You must enable TREADY in order for AXI4-Stream to work. |