Template:VIServerPropsTable

Usage

This template contains a lookup table for all of the properties. It is used in the VI Server Class Hierarchy class pages to display the properties tables. The parameter is either the Class ID number where the list is then filtered to properties of that class, or the parameter is left blank to signify this class has no properties.

Parameter	Description	Default
{{{1}}}	The class ID.	Blank - Translates into message: No Properties for this class.

Example: No Properties Exists

{{VIServerPropsTable}}

No Properties for this class.

Example: Properties Exist - Application Class

{{VIServerPropsTable|1}}

Show/Hide Application Properties Table

Legend
R/W	Readable/Writable Permissions
RTE	Available in the Run-Time Engine
Basic Development Environment
VI Scripting
Private
Deprecated

Application Properties Table

Property ID	Long Name (English)	Description	Read/Write	Run-Time Engine
0	Application:Name	Filename of the application.	Read Only	Yes (Read Only)
1	Application:User Name	User name used to open the application.	Read/Write	Yes (Read Only)
2	Application:Version Number	Version number of the application. In a stand-alone application or shared library, this property returns the version of the LabVIEW Run-Time Engine.	Read Only	Yes (Read Only)
3	Application:Kind	Indicates the LabVIEW instance the VI is running in, including invalid application types.	Read Only	Yes (Read Only)
4	Application:Target:Operating System	Indicates the operating system for which the application was built. Mac OS refers to Mac OS versions 9 and 8. Carbon refers to Mac OS X (32-bit).	Read Only	Yes (Read Only)
5	Application:Target:CPU	Indicates the target CPU of an application.	Read Only	Yes (Read Only)
6	Operating System:Name	Name of the operating system where the application is actually running.	Read Only	Yes (Read Only)
7	Operating System:Version Number	Version number of the actual operating system.	Read Only	Yes (Read Only)
8	Application:Exported VIs In Memory	Returns a list of exported VIs in memory.	Read Only	Yes (Read Only)
9	Printing:File Wrap Text Length	Maximum number of characters on a single line in a file. Affects the Print:VI To HTML, Print:VI To RTF, and Print:VI To Text methods. Set this property to 0 to print all the characters on one line so the text does not wrap.	Read/Write	No
A	Printing:PNG Compression Level	Number between 0 and 9 that specifies the level of compression you want for the PNG file for graphics in VIs printed either interactively or with the Print:VI To HTML method. The quality of the graphic is not affected by the compression, but the graphic file size and speed of compression are affected by this value. Valid values range from 0 to 9 and balance file compression with speed. 0 designates no compression. 1 designates less compression, but faster speed. 9 designates high compression, but slower speed. If you enter –1, LabVIEW selects the best combination of speed and compression.	Read/Write	No
B	Printing:JPEG Quality	Percentage value from 0 to 100 specifying the level of quality you want for the JPEG graphic in VIs printed either interactively or with the Print:VI To HTML method. The scale balances image quality and file size. A value in the 75 to 95 range produces a compressed file with a high-quality image, and a value below 50 produces a smaller file size with a low-quality image. The default is 80.	Read/Write	No
C	Printing:Custom Connector?	Specifies whether to print the connector pane and icon of VIs when using the custom format with one of the print documentation VI methods.	Read/Write	No
D	Printing:Custom Description?	Specifies whether to print VI descriptions when using the custom format with one of the print documentation VI methods.	Read/Write	No
E	Printing:Custom Panel?	Specifies whether to print the front panel when using the custom format with one of the print documentation VI methods.	Read/Write	No
F	Printing:Custom Panel Border?	Specifies whether to print the front panel with a border when using the custom format with one of the print documentation VI methods.	Read/Write	No
10	Printing:Custom Controls?	Specifies whether to print front panel control information when using the custom format with one of the print documentation VI methods.	Read/Write	No
11	Printing:Custom Control Descriptions?	Specifies whether to print descriptions of front panel controls when using the custom format with one of the print documentation VI methods.	Read/Write	No
12	Printing:Custom Control Types?	Specifies whether to print data type information for front panel controls when using the custom format with one of the print documentation VI methods.	Read/Write	No
13	Printing:Custom Diagram?	Specifies whether to print block diagrams when using the custom format with one of the print documentation VI methods.	Read/Write	No
14	Printing:Custom Diagram Hidden?	Specifies whether to print the hidden frames in Case and Stacked Sequence structures that might be present on the block diagram when using the custom format with one of the print documentation VI methods.	Read/Write	No
15	Printing:Custom Diagram Repeat?	Specifies whether to print visible subdiagrams of each Case, Event, and Stacked Sequence structure in sequence with the non-visible subdiagrams when using the custom format with one of the print documentation VI methods. If you print the visible subdiagrams in sequence, those subdiagrams print twice.	Read/Write	No
16	Printing:Custom List of SubVIs?	Specifies whether to print a list of the subVIs and Express VIs including the icon, name, and path when using the custom format with one of the print documentation VI methods. If a polymorphic VI is a subVI, LabVIEW prints the instance used in the top-level VI including the icon, name, and path. If the top-level VI is polymorphic, LabVIEW prints a list of all the instances of the polymorphic VI including the icon, name, and path of each instance.	Read/Write	No
17	Printing:Custom Hierarchy?	Specifies whether to print the hierarchy of the VI in memory when using the custom format with one of the print documentation VI methods.	Read/Write	No
18	Printing:Custom History?	Specifies whether to print the VI revision history information when using the custom format with one of the print documentation VI methods.	Read/Write	No
19	Application:Directory Path	Absolute path to the directory where the application is located.	Read Only	Yes (Read Only)
1A	Server:VI Access List	List that describes which VIs on the VI server are accessible by remote clients.	Read/Write	Yes
1B	Server:TCP/IP Access List	List that describes which TCP/IP addresses of remote clients may access the VI server.	Read/Write	Yes
1C	Application:All VIs In Memory	Returns a list of VIs in memory for the specified application instance. This property returns an error if you wire a remote application reference to the reference input. For a remote application, use the Exported VIs in Memory property to return a list of exported VIs.	Read Only	Yes (Read Only)
1D	Application:Menu Launch:VI	Returns the name of the VI that launched the calling VI from a menu selection.	Read Only	Yes (Read Only)
1E	Application:All System VIs in Memory		Read Only	Yes
1F	Application:Menu Set		Read/Write	No
20	Server:TCP Listener Active	Specifies whether the TCP interface to the VI Server is currently accepting connections.	Read/Write	Yes
21	Display:Primary Workspace	Gives the bounding rectangle of the computer's primary monitor.	Read Only	Yes (Read Only)
22	Display:All Monitors	Returns information about all the monitors on the computer, including their bit depths and bounding rectangles.	Read Only	Yes (Read Only)
24	Server:VI Calls Allowed		Read/Write	No
25	Server:VI Operations Allowed		Read/Write	No
26	Server:Application Operations Allowed		Read/Write	No
27	Server:Logging Enabled	Specifies whether the TCP interface to the VI Server is logging operations to a file.	Read/Write	Yes
28	Server:Logging File Path	Path of the log file created during TCP/IP communication.	Read/Write	Yes
29	Printing:Custom All Controls?	Specifies whether to print all controls or only the controls wired to the connector pane when using the custom format with one of the print documentation VI methods.	Read/Write	No
2A	Application:Controls Palette Open		Read/Write	No
2B	Application:Functions Palette Open		Read/Write	No
2C	Application:Tools Palette Open		Read/Write	No
2D	Application:Default:File Dialog Path		Read/Write	Yes
2E	Web Server:Server Active	Determines whether the built-in Web Server is enabled. This property immediately changes the status of the Web Server without requiring you to restart LabVIEW. Changes using this property are not saved across sessions of LabVIEW and are not reflected on the Web Server page of the Options dialog box.	Read/Write	Yes
2F	Web Server:Root Directory Path	Specifies the root directory from which the built-in Web Server loads files for document requests.	Read/Write	Yes
30	Web Server:HTTP Port	The port to which the built-in Web Server listens for HTTP requests.	Read/Write	Yes
31	Web Server:Read Timeout	Determines how long the built-in Web Server waits for read operations to complete when the Web Server reads HTTP requests from HTTP clients.	Read/Write	Yes
32	Web Server:Logging Enabled	Determines whether the built-in Web Server logs to a file information about HTTP requests.	Read/Write	Yes
33	Web Server:Logging File Path	Determines where the built-in Web Server places the log file.	Read/Write	Yes
34	Web Server:TCP/IP Access List	Sets or gets the TCP/IP addresses that have access to the Web Server. This property also sets or gets whether each address has access to view a VI remotely, view and control a VI remotely, or does not have access to the Web Server.	Read/Write	Yes
35	Web Server:VI Access List	Sets or gets the VIs that are visible through the Web Server. This property also sets or gets whether LabVIEW allows access to each VI.	Read/Write	Yes
36	Application:Parent Window For Dialogs		Read/Write	Yes
37	Application:Version As Integer		Read Only	Yes
38	Application:Embedded Root Path		Read Only	Yes
39	Application:Preferences File Path		Read Only	Yes
3A	Application:Host Preferences Section		Read Only	Yes
3B	Application:Registered Owner		Read Only	Yes
3C	Application:Registered Organization		Read Only	Yes
3D	Application:Serial Number		Read Only	Yes
3E	Application:Downloaded VIs		Read Only	No
3F	Application:Show FP Tip Strips	Writing the property: Setting this property to TRUE enables the display of tip strips on front panel controls. Setting the property to FALSE prevents them from being displayed. Reading the property: Specifies whether tip strips display when idling over controls on the front panel.	Read/Write	Yes
41	Remote Panel:Connections To Clients	Returns an array of clusters containing connection information about the clients currently connected to the computer.	Read Only	Yes (Read Only)
42	Remote Panel:Connections To Servers	Returns an array of clusters containing connection information about the servers to which the computer is currently connected.	Read Only	Yes (Read Only)
43	Remote Panel:NetLoad Monitor Enabled		Read/Write	Yes
44	Application:Target:IP Address		Read Only	Yes
45	Application:Remote Web Server Active		Read Only	Yes
46	Application:Active:VI	Returns the name of the active VI in the application.	Read Only	Yes
47	Application:Selection List Changed		Read Only	Yes
48	Printing:Color/Grayscale?	If TRUE, LabVIEW sends color/grayscale output to the printer. If FALSE, LabVIEW sends monochrome output to the printer.	Read/Write	Yes
49	Printing:Default Printer	Gets or sets the name of the default printer in LabVIEW.	Read/Write	Yes
4A	Printing:Method	Gets or sets how LabVIEW prints.	Read/Write	Yes
4B	Printing:Available Printers	Returns an alphabetized array of printer names available on the computer.	Read Only	Yes
4D	Application:Unattended Mode		Read/Write	Yes
4E	Application:Default:Error Handler VI		Read/Write	Yes
4F	Application:Command Line Arguments	Returns an array of user-defined command-line arguments passed when LabVIEW launched.	Read Only	Yes (Read Only)
51	Application:Use App Template Browser		Read/Write	Yes
52	Application:Assistants Use Strict Types Default		Read/Write	Yes
53	Application:Auto-Route Wires	Returns whether LabVIEW automatically finds a route for a wire.	Read/Write	No
54	Application:Target:Info		Read Only	Yes
55	Application:Target:Kind		Read Only	Yes
56	Application:Defer Drawing		Read/Write	Yes
57	Application:Default:Data Directory	Path to the default data directory.	Read Only	Yes (Read Only)
58	Application:Search Paths		Read/Write	Yes
59	Application:Real-Time Support		Read Only	Yes
5A	Application:User Interface Available	If you are not targeted to a real-time (RT) platform, this property is always TRUE. If you are targeted to an RT-platform and the host is connected, this property is TRUE. When this property is FALSE, the host is not connected, requiring that the Real-Time Module application must be able to handle all operations independent of the host. Use this property to determine when it is safe to display a dialog box that requires user interaction.	Read Only	Yes
5B	Application:Delete FP Terminal from Diagram	Returns whether LabVIEW deletes terminals corresponding to front panel objects from diagram operations.	Read/Write	No
5C	Printing:Custom Express VI Configuration?	Specifies whether to print the configuration information for any Express VIs on the block diagram when using the custom format with one of the print documentation VI methods.	Read/Write	No
5D	Server:Port	Gets or sets the LabVIEW VI server port. LabVIEW returns an error if you attempt to access this property on a remote application.	Read/Write	Yes
5E	Remote Panel:Is Supported		Read Only	Yes
5F	Application:Installed Package		Read Only	Yes
60	Application:Inside Build App		Read/Write	Yes
62	Application:Internet Toolkit Installed		Read/Write	Yes
63	Application:Language	Indicates the language of the LabVIEW environment or stand-alone application as a string according to ISO 639. Values include en, de, fr, ja, ko, and zh-cn.	Read Only	Yes (Read Only)
64	Application:Window For Panel Origin		Read/Write	Yes
65	Module Handle		Read Only	Yes
66	Application:Pump OS Messages		Read/Write	Yes
67	Application:Full Feature		Read Only	Yes
68	Application:All Contexts		Read Only	Yes
69	[[Project:Projects[] property|Project:Projects[]]]	Returns an array of references to each LabVIEW project in memory. You can use these references with the Project properties.	Read Only	Yes
6A	Application:DWarn Dialog		Read/Write	Yes
6B	Options:Use Abridged Menus		Read/Write	No
6E	Source Control:Configuration Data		Read/Write	Yes
6F	Source Control:Provider Name		Read/Write	Yes
70	Source Control:Provider Location		Read/Write	Yes
71	Source Control:Display Only Selected Files		Read/Write	Yes
72	Source Control:Select Hierarchy When Adding Files		Read/Write	Yes
73	Source Control:Select Callers When Checking Files Out		Read/Write	Yes
74	Source Control:Display Warning If File Is Checked Out		Read/Write	Yes
75	Source Control:Use Dialog Box For File Checkout		Read/Write	Yes
76	Source Control:Prompt to Check Out		Read/Write	Yes
77	Source Control:Prompt to Add to SCC When Adding to Project		Read/Write	Yes
78	Source Control:Prompt to Add SubVIs		Read/Write	Yes
7A	Application:Context Name		Read Only	Yes
7C	NI Security:User	Indicates the name of the user who is currently logged in, using the format of <Domain Name>\<User Name>.	Read Only	Yes
7D	Application:Is Editor In MDI Mode		Read Only	Yes
7E	Project:Owning Project	Returns a reference to the project that owns the referenced application.	Read Only	No
7F	Application:Menu Launch:App	Returns a reference to the application instance that launched the calling VI from a menu selection.	Read Only	Yes (Read Only)
80	Application:Active:Application	Gets an application reference to the active VIs owning application.	Read Only	Yes (Read Only)
81	Project:Default Project		Read Only	No
82	Project:Has Any Project Been Created		Read Only	Yes
83	Application:LVTarget		Read Only	No
84	Application:Private?		Read Only	Yes
85	Project:Show Path in Project Window		Read/Write	Yes
86	Project:Target Item	Returns the associated target item of the application reference you specify.	Read Only	Yes
87	Project:Get Last Max Load Time		Read Only	Yes
88	[[Project:Libraries[] property|Project:Libraries[]]]		Read Only	No
89	Application:Save Format		Read/Write	Yes
8B	Application:Target:Class Name		Read Only	Yes
8C	Options:Editor Menu Bar		Read Only	No
8D	Application:Debug Name	Returns the name used for opening a debugging connection to this application or shared library. This method is only useful in built applications or shared libraries.	Read Only	Yes
8E	Application:Cross Context Settings		Read Only	No
8F	Application:Default:Context Name		Read Only	Yes
90	Application:Default:Application	Returns the default application reference.	Read Only	Yes
91	Application:All Libraries in All Application Instances		Read Only	Yes
92	Project:Active Project	Returns a reference to the LabVIEW project that is active when this property executes. A project is active if the user has the associated project window in focus or any member of the project in focus, including VIs, controls, and project libraries.	Read Only	No
93	Printing:Custom Control Label/Caption?	Specifies whether to print the label and/or caption for each control when using the custom format with one of the print documentation VI methods.	Read/Write	No
94	Server:Service Name	Gets or sets the service name for the LabVIEW VI Server.	Read/Write	Yes
96	Application:Z Compress Level		Read/Write	Yes
97	Application:On Line		Read/Write	Yes
98	Debug Server:Server Active	Determines whether the Debug Server is enabled. You can use this property only in LabVIEW-built applications or shared libraries.	Read/Write	Yes
99	Debug Server:TCP/IP Access List	List that describes which TCP/IP addresses of remote clients can access the Debug Server. You can use this property only in LabVIEW-built applications or shared libraries.	Read/Write	Yes
9B	Source Control:Include VILib In Get Dependents		Read/Write	Yes
9C	Source Control:Include InstrLib In Get Dependents		Read/Write	Yes
9D	Save for Previous:Original App		Read Only	Yes
9E	Application:VI Of Top Most Block Diagram	Returns a reference to the block diagram highest in the Z order, which is most likely the last block diagram accessed.	Read Only	Yes
9F	Run Reserve XInterface Components		Read/Write	Yes
A0	NI Security:Nobody Logged In?	Determines if anyone is logged in.	Read Only	Yes
A1	NI Security:Unique User		Read Only	Yes
A2	Delay File Notifications		Read/Write	Yes
A3	MathScript:Path		Read Only	Yes
A4	Application:Multi Pwd Op Cancelled?		Read Only	No
A5	MathScript:All M Files In Context		Read Only	No
A6	Application:Is Migration Enabled		Read/Write	No
A7	Crosslink:Force Enable Dialogs		Read/Write	Yes
A8	Crosslink:Suppress Dialogs		Read/Write	Yes
A9	Suppress Auto Update Dependencies		Read/Write	Yes
AA	Application:Let Private Context Run With XNode		Read/Write	Yes
AD	Application:Clipboard VI		Read/Write	Yes
AE	Tool Number		Read/Write	Yes
AF	Application:Compiler:DFIR Compiler		Read/Write	Yes
B0	Supress Update Name Preflight		Read/Write	Yes
B1	Palettes:Get Functions Names		Read Only	No
B2	Palettes:Get Controls Names		Read Only	No
B3	Statechart:Show Custom Icon		Read Only	Yes
B4	Statechart:Show Configuration		Read Only	Yes
B5	Web Server:Config File Path	The path of the LabVIEW Web Server configuration file.	Read Only	Yes
B6	Web Server:Default Config File Path	The path of the Web Server configuration file that contains the LabVIEW default configuration.	Read Only	Yes
B7	Statechart:CodeGenCaseStruct		Read/Write	Yes
B8	Statechart:Show Path for IsIn		Read Only	Yes
B9	Application:Saveable Versions	An array of the LabVIEW versions to which this version of LabVIEW can save. The array is in reverse chronological order, with the zeroth element being the current version of LabVIEW. Each element of the array is a valid version to pass to VI server functions which save to previous versions.	Read Only	No
BA	Application:DSC Support		Read Only	Yes
BB	Load and Save Warnings:Auto Test Mode		Read/Write	No
BC	Load and Save Warnings:History		Read Only	No
BD	Statechart:InlineTopLevelGraph		Read/Write	Yes
BE	Application:Property and Method Data Types		Read Only	No
BF	Operating System:Build Number	Build number of the actual operating system. This string returns an alphanumeric value of the build number that you can use to compare the build version of operating systems. This property is read only.	Read Only	Yes
C1	Application:Compiler:Sanity		Read/Write	Yes
C2	Application:Compiler:DOT		Read/Write	Yes
C6	Operating System:Detailed Name	Detailed name of the operating system where the application is actually running. This string value returns the operating system and its version, such as Microsoft Windows XP. This property is similar to a combination of OSName and OSVersion, which return the platform name and a numeric version number respectively. This property is read only.	Read Only	Yes
CA	Application:Compiler:LLVM Compiler		Read/Write	Yes
CD	Application:All Libraries in Application Instance	Lists all Libraries currently in memory in this application instance.	Read Only	Yes
CE	Application:Target:Number of Logical Processors	Returns the number of processing units the computer or target contains.	Read Only	Yes
D0	Application:Target:Number of Cores per Package	Returns the number of cores per package the computer or target contains.	Read Only	Yes
D1	Application:Target:Number of Logical Processors per Core	Returns the number of logical processors per core the computer or target contains.	Read Only	Yes
D2	Application:Target:Current Processor ID		Read Only	Yes
D3	Application:Target:Data Cache Entry Sizes	Returns an array of the entry sizes, in bytes, for all cache levels the computer or target contains.	Read Only	Yes
D4	Application:Target:Data Cache Sizes	Returns an array of the cache sizes, in bytes, for each cache level the computer or target contains.	Read Only	Yes
D5	Application:Target:Number of Packages	Returns the number of packages, or chips, the computer or target contains.	Read Only	Yes
D7	Application:Version Year	Version year of the application. In a stand-alone application or shared library, this property returns the version year of the LabVIEW Run-Time Engine.	Read Only	Yes (Read Only)
D9	Application:Compiler:BriefDOT		Read/Write	Yes
DA	Application:Is Build App Instance		Read/Write	No
DB	Application:TestStandOptions		Read/Write	Yes
DC	Application:Legacy Build App File Layout		Read Only	Yes
DD	Application:Available Environment Modes		Read Only	No
DE	Application:Save Version	Returns the version number of the LabVIEW file format to which LabVIEW documents are saved. This version number might be different from the version number of the application. For example, LabVIEW with the version number 9.0.1 saves LabVIEW documents with a file format version number of 9.0.	Read Only	Yes (Read Only)
DF	Application:Save Version As Integer		Read Only	Yes
E0	Get NXT Context		Read Only	No
E1	Application:Hide Load Warning		Read/Write	Yes
E2	Application:Disable Path Case		Read/Write	Yes
E3	Application:Lock Instantiations for AppBuilder		Read/Write	No
E4	Application:Clipboard Mode		Read/Write	Yes
E6	Application:Compiler:SSE Runtime Optimization		Read/Write	Yes
E7	Printing:Custom Cluster Constants?	Specifies whether to print the hidden contents of iconified cluster constants that might be present on the block diagram when using the custom format with one of the print documentation VI methods.	Read/Write	No
E8	MathScript:Compiler Signature		Read Only	No
E9	VIObjCache:Path		Read Only	Yes
EA	Application:Compiler:SSE1 Code Generation		Read/Write	Yes
EB	Application:Compiler:SSE2 Code Generation		Read/Write	Yes
EC	Application:UD Refnum Files		Read Only	No
ED	Application:Rename Variables for AppBuilder		Read/Write	No
EE	Statechart:Is Installed		Read Only	Yes
EF	Application:Current Environment Mode	Returns the current environment mode of LabVIEW, such as robotics. If you call this property from a VI in the LabVIEW development system environment, this property returns an empty string.	Read/Write	Yes
F0	MathScript:HighlightingColors		Read Only	No
F1	MathScript:ColorsInSync		Read/Write	No
F2	MathScript:CompilerInMemory		Read Only	No
F3	VIObjCache:Available in RTE		Read/Write	Yes
F4	Application:Mass Compile Warn On Read Only VIs		Read/Write	No
F5	Application:InstCachePath		Read Only	Yes
F6	Application:Is Compile Suppressed		Read/Write	No
F7	VIObjCache:DistPath		Read Only	No
F8	VIObjCache:UserPath		Read Only	No
F9	Application:Library Finish Partial Load Enabled		Read/Write	Yes
FA	AppBuilderCache:Path		Read Only	No
FB	Separate Compiled Code For New Files		Read Only	No
FC	Application:Compiler Threshold	Gets or sets how complex a VI must be before the compiler limits optimizations to improve editor responsiveness. If the complexity of a VI is lower than the threshold indicated by this value, the compiler does not limit optimizations, thereby improving the execution speed of the VI. If the complexity of a VI is higher than the threshold, the compiler limits optimizations in order to improve editor responsiveness for the VI.	Read/Write	No
FD	Application:Locked Down For Build		Read/Write	Yes
FE	Application:Cross Compile Count		Read Only	No
FF	Application:GdiCount		Read Only	No
100	Application:Compiler:FP Register Candidate		Read/Write	Yes
101	Application:Compiler:AutoInlining		Read/Write	Yes
102	Application:ShowAutoErrDialog		Read/Write	Yes
103	Application:Selective Deallocation		Read/Write	Yes
104	Application:Selective Deallocation:EnableForAllVIs		Read/Write	Yes
105	Application:Selective Deallocation:LargeBufferThreshold		Read/Write	Yes
106	Application:Enable Inheritance LinkRef Addition		Read/Write	Yes
107	Application:Enable Inheritance LinkRefs		Read/Write	Yes
108	Application:Full Version Year		Read Only	Yes
109	Application:Version Year Number Only		Read Only	Yes
110	Application:ImageTableMaxCount		Read Only	Yes
111	Application:Enable Binary Compatibility Load		Read/Write	Yes
112	Application:EnableExcursionFreeExecSystems		Read/Write	Yes
113	Application:IgnoreUnresolvedDLLRef		Read Only	Yes
114	Application:ImageTableCount		Read Only	Yes
115	Application:PPL LoadInCompatible LVVersion Default Value		Read/Write	Yes
116	Application:Treat LV 2016 As Binary Compatible		Read/Write	Yes
117	Application:SaveChangesAutoSelection		Read/Write	No
118	Application:NativeEventTracingEnabled		Read/Write	Yes

Example: Properties Exist - VI Class

{{VIServerPropsTable|2}}

Show/Hide VI Properties Table

Legend
R/W	Readable/Writable Permissions
RTE	Available in the Run-Time Engine
Basic Development Environment
VI Scripting
Private
Deprecated

VI Properties Table

Property ID	Long Name (English)	Description	Read/Write	Run-Time Engine
1F4	VI Name	Name of the VI file. If a LabVIEW project library owns the VI, the property returns the qualified name of the VI, which includes the project library filename.	Read/Write	Yes (Read Only)
1F5	VI Path	Path to the VI file.	Read Only	Yes (Read Only)
1F6	VI Description	Description of the VI that appears in the Context Help window when you move the cursor over the VI icon and in VI documentation you generate.	Read/Write	Yes (Read Only)
1F7	History:Entire Text	Returns all the text that was added to the VI revision history.	Read Only	No
1F9	Front Panel Window:Title Bar Visible	Indicates whether to display a title bar on the front panel while the VI runs.	Read/Write	Yes
1FA	Front Panel Window:Closeable	Indicates whether the close button in the title bar is disabled and the Close item in the File menu is disabled.	Read/Write	Yes
1FB	Front Panel Window:OldResizable		Read/Write	Yes
1FC	Front Panel Window:Allow Runtime PopUp	Indicates whether to display shortcut menus for front panel objects while the VI runs. If you do not display default run-time shortcut menus, you can continue to include customized shortcut menus.	Read/Write	Yes
1FD	Front Panel Window:Highlight Return Button	Indicates whether to highlight Boolean controls that have a shortcut key of <Enter>.	Read/Write	Yes
1FE	Front Panel Window:Size to Screen (Deprecated)		Read/Write	Yes
1FF	Front Panel Window:Auto Center (Deprecated)		Read/Write	Yes
200	Front Panel Window:Show Scroll Bars		Read/Write	Yes
201	Front Panel Window:Show Menu Bar	Indicates whether to display the menu bar on the front panel while the VI runs.	Read/Write	Yes
202	Tool Bar:Visible	Indicates whether to display the toolbar while the VI runs.	Read/Write	Yes
203	Tool Bar:Show Run Button	Indicates whether to display the Run button on the toolbar while the VI runs.	Read/Write	Yes
204	Tool Bar:Show Free Run Button	Indicates whether to display the Run Continuously button on the toolbar while the VI runs.	Read/Write	Yes
205	Tool Bar:Show Abort Button	Indicates whether to display the Abort Execution button on the toolbar while the VI runs.	Read/Write	Yes
206	Execution:Allow Debugging	If TRUE, you can use debugging tools on the VI. For example, you can set breakpoints, create probes, enable execution highlighting, and single-step through execution. Set this property to FALSE to disable use of debugging tools, reduce memory requirements, and to improve performance slightly for the VI.	Read/Write	Yes (Read Only)
208	Front Panel Window:Is Dialog		Read/Write	Yes
209	Execution:Show Front Panel On Load	Indicates whether to show the front panel when the VI is loaded.	Read/Write	Yes (Read Only)
20A	Execution:Show Front Panel On Call	Indicates whether to show the front panel when the VI is called.	Read/Write	Yes
20B	Execution:Close After Call	Indicates whether to close the front panel after the VI runs.	Read/Write	Yes
20C	Execution:Run When Opened	Indicates whether to run the VI when it opens.	Read/Write	Yes (Read Only)
20D	Execution:Is Reentrant	Indicates whether a VI can be reentrant.	Read/Write	Yes (Read Only)
20E	Execution:Priority	Indicates the priority of the VI when it runs in parallel with other tasks.	Read/Write	Yes (Read Only)
20F	History:Use Defaults	Indicates whether to use the global default history or to use the values entered in other history properties.	Read/Write	No
210	History:Always Add Comments At Save	Indicates whether to add a comment to the VI revision history every time the VI is saved.	Read/Write	No
211	History:Prompt for Comments At Close	Indicates whether to prompt for a VI revision history comment when the VI closes.	Read/Write	No
212	History:Prompt for Comments At Save	Indicates whether to prompt for a VI revision history comment when the VI is saved.	Read/Write	No
213	History:Record Application Comments	Indicates whether to add comments to the VI revision history when certain events occur, such as conversion to a new version of LabVIEW, subVI changes, and changes to the name or path of the VI.	Read/Write	No
214	Help:Document Tag	Index keyword or HTML filename for a topic in the compiled help file to which the VI is linked.	Read/Write	Yes
215	Help:Document Path	Path or symbolic path to an HTML file (.htm or .html) or compiled help file (.chm or .hlp) to which the VI is linked.	Read/Write	Yes
216	Front Panel Window:Open		Read/Write	Yes
217	Front Panel Window:Is Frontmost	Writing TRUE to this value brings the front panel to the front. This property applies only in the application instance of the calling VI. Writing FALSE to this value has no effect. If you read this property, it indicates whether the front panel window is the front window (ignoring floating windows).	Read/Write	Yes
218	Front Panel Window:Window Bounds	The four elements in the cluster are the top, left, bottom, and right values of the front panel window, which includes the interior region, scroll bars, title bar, menu bar, and toolbar. They are in global screen coordinates, that is, the numbers refer to coordinates within a computer monitor's screen (rather than an open window).	Read/Write	Yes
219	Modifications:VI Modifications Bitset Old		Read Only	Yes
21A	Modifications:Front Panel Mods Bitset	Indicates whether changes were made to the front panel since the VI was saved. If the value is zero, no changes where made. If the value is nonzero, changes were made.	Read Only	Yes (Read Only)
21B	Modifications:Block Diagram Mods Bitset	Indicates whether changes were made to the block diagram since the VI was saved or opened, depending on which was last. If the value is zero, no changes were made. If the value is nonzero, changes were made.	Read Only	No
21C	Metrics:Code Size	Amount of memory used for VI code in bytes.	Read Only	Yes (Read Only)
21D	Metrics:Total Data Size	Amount of memory allocated for data in bytes.	Read Only	Yes (Read Only)
21E	Metrics:Size of Front Panel	Size of the front panel in bytes.	Read Only	Yes (Read Only)
21F	Metrics:Size of Block Diagram	Size of the block diagram in bytes.	Read Only	Yes (Read Only)
220	Callers' Names	Returns a list of all the loaded VIs that call the referenced VI.	Read Only	Yes (Read Only)
221	Callees' Names		Read Only	Yes
225	Auto Logging:Log File Path	Path of the datalog file in which front panel data and a time stamp are written.	Read/Write	Yes
226	Auto Logging:Log at Finish	Indicates whether to write front panel values to a datalog file after the VI runs.	Read/Write	Yes
227	Auto Logging:Print at Finish	Indicates whether to print the front panel after the VI runs.	Read/Write	Yes
228	Front Panel Window:Origin		Read/Write	Yes
229	Front Panel Window:Title	String that appears in the title bar. This string does not have to match the VI filename.	Read/Write	Yes
22A	Connector Pane:Set	Sets the connector pane of the VI to match the connector pane of the VI reference input.	Write Only	No
22B	Execution:Suspend On Call	Indicates whether LabVIEW suspends the execution of the VI when calling it as a subVI. Use this property carefully with reentrant VIs.	Read/Write	Yes (Read Only)
22C	Front Panel Window:Panel Bounds	The four elements in the cluster are the top, left, bottom, and right values of the interior portion of the front panel, not including the scroll bars, title bar, menu bar, and toolbar. The cluster elements are in global screen coordinates, which are the numbers that refer to coordinates within a computer monitor's screen (rather than an open window).	Read/Write	Yes
22D	Execution:State	Indicates the execution state of the VI.	Read Only	Yes (Read Only)
22E	Edit Mode On Open	If TRUE, the VI opens in edit mode. If FALSE, the VI opens in run mode, and the title bar, menu bar, and toolbar do not appear.	Read/Write	Yes
22F	Execution:Preferred Exec System	Indicates the execution system in which the VI runs.	Read/Write	Yes (Read Only)
230	Modifications:User Changes		Read Only	No
231	Front Panel Window:Custom Title	Indicates whether the VI has a custom title string. Write FALSE to remove the custom title string.	Read/Write	Yes
232	VI Type	Indicates the type of VI.	Read Only	Yes (Read Only)
234	History:Revision Number	Current revision number of the VI.	Read/Write	No
235	Connector Pane:Data (Deprecated)		Read Only	Yes
236	Metrics:Advanced		Read Only	No
237	Block Diagram Window:Open	Opens or closes the block diagram window.	Read/Write	No
238	Block Diagram Window:Window Bounds	Gets or sets the bounds for a block diagram window.	Read/Write	No
239	Connector Pane:Old Type Descriptor		Read Only	Yes
23A	Tool Kit Attr		Read/Write	No
23B	Front Panel RefNum TD		Read Only	No
23C	Block Diagram	Returns a reference to the block diagram of the VI. This property is not available in stand-alone applications.	Read Only	No
23D	Front Panel	Reference to the front panel of a VI.	Read Only	Yes (Read Only)
23E	Connector Pane:Reference	Returns a reference to the connector pane of the VI.	Read Only	Yes (Read Only)
23F	Front Panel Window:Keep Window Proportions	Indicates whether the front panel window adjusts its size in proportion with a change in monitor resolution. The window changes size so it covers the same percentage of the screen that it covered at its original resolution.	Read/Write	Yes
240	Modifications:VI Signatures		Read Only	Yes
241	Is Instance	Returns whether or not the VI is an Express VI instance.	Read/Write	No
242	Automatic Error Handling	If TRUE, enables automatic error handling for a VI.	Read/Write	No
243	Block Diagram Window:Origin	Gets or sets the vertical and horizontal coordinates in the upper left-hand corner of the block diagram.	Read/Write	No
244	Run-Time Menu Path	When read, this property returns the run-time menu path of the VI. When written, this property updates the run-time menu path of the VI. If the VI is running when you write this property, it updates the menu with data from the new path.	Read/Write	Yes
245	Front Panel Window:Is Floating		Read/Write	Yes
246	RunVILocal		Read/Write	Yes
247	Front Panel Window:Minimizable	Indicates whether the user can minimize the front panel window while the VI runs.	Read/Write	Yes
248	Front Panel Window:Resizable	Indicates whether the user can resize the front panel window while the VI runs.	Read/Write	Yes
249	Expand When Dropped As SubVI	Expands to show terminals when dropped as a subVI.	Read/Write	No
24A	Printing:Page Orientation	Gets or sets the page orientation to use when printing the VI.	Read/Write	Yes
24B	Printing:Page Headers?	If TRUE, LabVIEW prints headers for the VI. Use the Printing:Header Content properties in this class to customize the contents of the headers.	Read/Write	Yes
24C	Printing:Front Panel Scaling?	If TRUE, LabVIEW scales the front panel to fit on the printed page.	Read/Write	Yes
24D	Printing:Margins	Gets or sets the page margins to use when printing the VI in inches or centimeters.	Read/Write	Yes
24E	Printing:Header Content:VI Name?	If TRUE, LabVIEW includes the VI name in the headers for the VI. Use the Printing:Page Headers? property to set whether LabVIEW prints the headers for the VI.	Read/Write	Yes
250	Printing:Header Content:Date Printed?	If TRUE, LabVIEW includes the date printed in the headers for the VI. Use the Printing:Page Headers? property to set whether LabVIEW prints the headers for the VI.	Read/Write	Yes
251	Printing:Header Content:Modify Date?	If TRUE, LabVIEW includes the last modified date in the headers for the VI. Use the Printing:Page Headers? property to set whether LabVIEW prints the headers for the VI.	Read/Write	Yes
252	Printing:Header Content:Page Number?	If TRUE, LabVIEW includes the page number in the headers for the VI. Use the Printing:Page Headers? property to set whether LabVIEW prints the headers for the VI.	Read/Write	Yes
253	Printing:Header Content:VI Icon?	If TRUE, LabVIEW includes the VI icon in the headers for the VI. Use the Printing:Page Headers? property to set whether LabVIEW prints the headers for the VI.	Read/Write	Yes
254	Printing:Header Content:VI Path?	If TRUE, LabVIEW includes the VI path in the headers for the VI. Use the Printing:Page Headers? property to set whether LabVIEW prints the headers for the VI.	Read/Write	Yes
255	Purgative		Read/Write	Yes
256	Control VI Type	Specifies whether a control VI is a control, a typedef, or a strict typedef. This property is valid for control VIs only.	Read/Write	Yes (Read Only)
257	VI Linker Errors		Read Only	Yes
258	Hide Instance VI Caption On Drop		Read/Write	No
259	Front Panel Window:Behavior	Sets the behavior of the front panel window. Valid values include 0 (Invalid), 1 (Default), 2 (Floating), 3 (Floating/Auto-Hide), and 4 (Modal).	Read/Write	Yes
260	Front Panel Window:State	Current state of the front panel window.	Read/Write	Yes
262	Printing:Block Diagram Scaling?	If TRUE, LabVIEW scales the block diagram to fit on the printed page.	Read/Write	Yes
263	Suppress Instance VI Halo		Read/Write	Yes
264	Is System VI		Read/Write	Yes
265	Front Panel Window:Minimum Size	Minimum size of the front panel window in pixels. If Front Panel Window:Resizable is TRUE, the user cannot resize the front panel smaller than the width and height you wire to this property.	Read/Write	Yes
266	Connector Pane:Checksum v1 (Deprecated)		Read Only	Yes
267	Front Panel Window:OS Window		Read Only	Yes
268	Block Diagram Window:OS Window		Read Only	No
269	Modifications:VI User Code GUID		Read Only	Yes
26A	Is Probe	Returns TRUE if the VI is running as a probe and the probe VI is open.	Read Only	No
26B	Suppress Data Manager		Read/Write	Yes
26C	Suppress Transact Info		Read/Write	Yes
26D	Execution:Retain Wire Values		Read/Write	No
26E	Is XNode VI		Read/Write	Yes
26F	Owning Application	Returns a reference to the application that owns the VI. Be sure and close this reference afterward.	Read Only	Yes (Read Only)
271	Front Panel Window:Window		Read Only	Yes
272	Block Diagram Window:Window		Read Only	No
273	Front Panel Window:Transparency	Sets the window transparency level of the VI. The level of transparency is a percentage where 0 is opaque and 100 is invisible. This property returns an error if you specify a value outside the range of 0 to 100. If you set the transparency level to 100, the VI becomes invisible and uncontrollable from the front panel. You must stop the VI on the block diagram for the front panel of the VI to become visible. You must set the Front Panel Window:Run VI Transparently property to TRUE for this property to have any effect. The default value for the Front Panel Window:Run VI Transparently property is FALSE, in which changing this property has no effect.	Read/Write	Yes
274	Front Panel Window:Run VI Transparently	Sets the VI to use a semi-transparent window style when running. Set the level of transparency using the Front Panel Window:Transparency property.	Read/Write	Yes
275	Front Panel Window:Monitor	The monitor on which the front panel window appears, if you have multiple monitors. (Windows) The value 0 is the primary monitor. (OS X) The value 1 is the primary monitor.	Read/Write	Yes
276	Library	Returns the name of the LabVIEW project library, XControl, or LabVIEW class that owns the VI. If no library, XControl, or class owns the VI, the property returns Not a Refnum.	Read Only	No
277	Context:Has Edits In Another Context		Read Only	Yes
278	Context:Has Edits In This Context		Read Only	Yes
279	Context:Is Reserved In Other Context		Read Only	Yes
27A	Context:Is Reserved In This Context		Read Only	Yes
27B	Help:Examples Exist		Read/Write	No
27C	BD Master Wizard		Read Only	No
27D	Connector Pane:DataType	Returns the data type of the connector pane as variant data. Connector panes for VIs have a VI data type. Connector panes for polymorphic VIs have a PolyVI data type. Connector panes for custom controls, global variables, and type definitions have the data type of the control.	Read Only	Yes (Read Only)
27E	Overload Info		Read/Write	No
27F	Connector Pane:Checksum v2 (Deprecated)		Read Only	Yes
280	Callees' Paths		Read Only	Yes
281	Callers' Paths		Read Only	Yes
282	VI Compile Time		Read Only	No
283	Auto Preallocate Arrays and Strings	Get or set the Autopreallocate arrays and strings setting on VIs. This is used by the FPGA module to optimize array and string operations by forcing LabVIEW to preallocate memory at compile time rather than dynamically allocating memory at run time.	Read/Write	Yes
284	No Clone If Instance VI		Read/Write	Yes
285	VI Clone Name	Name of the clone of a reentrant VI. Returns an error if the VI is not a clone.	Read Only	Yes
286	Is Clone VI	Returns TRUE if the VI is a clone of a reentrant VI.	Read Only	Yes
287	Suppress Type Prop		Read/Write	No
288	Execution:Reentrancy Type	Indicates the type of reentrancy LabVIEW uses for a reentrant VI.	Read/Write	Yes (Read Only)
289	Statechart:Supress Parse		Read/Write	No
28A	Statechart:Is Sub Panel Editable		Read/Write	Yes
28B	C Code Generation:Generate Guard Code		Read/Write	Yes
28C	C Code Generation:Generate Serial Only		Read/Write	Yes
28D	C Code Generation:Generate Integer Only		Read/Write	Yes
28E	C Code Generation:Generate C Function Calls		Read/Write	Yes
28F	C Code Generation:Use Stack Variables		Read/Write	Yes
290	Item ID		Read/Write	Yes
291	Metrics:Front Panel Loaded	Specifies whether the front panel of the VI is in memory. The front panel can be in memory even if the window is not open.	Read Only	Yes
292	Metrics:Block Diagram Loaded	Specifies whether the block diagram of the VI is in memory. The block diagram can be in memory even if the window is not open.	Read Only	Yes
293	Library:Version		Read Only	Yes
294	C Code Generation:Expression Folding		Read/Write	Yes
295	Library:Private		Read Only	No
296	Is Skinned		Read/Write	Yes
297	Block Diagram Window:State	Current state of the block diagram window.	Read Only	Yes
298	Modifications:VI Modifications Bitset	Indicates if changes were made to the VI since the VI was saved. If the value is zero, no changes were made. If the value is nonzero, changes were made.	Read Only	Yes (Read Only)
299	Ladder VI Needs Scripting		Read/Write	Yes
29B	C Code Generation:Inline SubVI		Read/Write	Yes
29C	Do Not Show Save Changes Dialog		Read/Write	No
29F	Front Panel Window:Native Window		Read Only	Yes
2A0	Block Diagram Window:Native Window		Read Only	No
2A1	Front Panel Window:Window Interface		Read Only	Yes
2A2	Block Diagram Window:Window Interface		Read Only	No
2A3	Is Generic		Read Only	Yes
2A4	Is VI Paused?	Specifies whether the execution of the VI is paused. A TRUE value indicates that the VI is paused. A FALSE value indicates that the VI is not paused or that it is not running.	Read Only	No
2A5	Number of Non-Proxy Callers		Read Only	Yes
2A6	Compiler:Generated Code Profiling Settings		Read/Write	No
2A7	Compiler:Generated Code Profiling Result		Read Only	No
2A8	Contains Compiled Code	Sets or returns whether the VI includes compiled code.	Read/Write	Yes (Read Only)
2A9	Is In Packed Library	Returns TRUE if a packed project library contains the VI.	Read Only	Yes
2AA	Execution:Inline SubVI	Specifies whether to inline the subVI into its calling VIs.	Read/Write	No
2AB	Execution:Inline Is Allowed	Returns TRUE if you can inline this subVI into its calling VIs.	Read Only	No
2AC	Execution:SSE Runtime Optimization		Read/Write	No
2AD	Has MathScript Nodes		Read Only	No
2AE	Execution:Inline SubVI If Possible		Read/Write	No
2AF	Execution:Compiled With SSE		Read Only	Yes
2B0	[[Terminal Bounds[] property|Terminal Bounds[]]]	Returns an array of terminal bounds for the connector pane of the referenced VI. The bounds for each terminal are represented as a cluster of integers that indicate the position of each edge of the terminal rectangle.	Read Only	Yes
2B1	Tagged And Not Edited		Read/Write	No
2B2	Connector Pane:Checksum Ignore Dynamic Dispatch v1 (Deprecated)		Read Only	Yes
2B3	Compiled:Code Complexity	Returns the complexity of the referenced VI in relation to the Compiler optimizations slider on the Environment page of the Options dialog box. By comparing these two values, you can determine whether LabVIEW prioritizes editor responsiveness or execution speed when compiling this VI.	Read Only	Yes
2B4	Compiled:Last Compiled With	Returns the level of compiler optimizations that LabVIEW last used to compile this VI. The value corresponds to whether the complexity of the VI was greater or less than the threshold at which LabVIEW begins limiting compiler optimizations to prioritize editor responsiveness.	Read Only	Yes
2B5	Inline Callees		Read Only	Yes
2B6	Library:Version	Returns the version of the library that contains the VI you specify.	Read Only	Yes
2B7	Metrics:Number of clones		Read Only	Yes
2B8	Execution:Inline Enum		Read/Write	No
2B9	Execution:Did Compiler Or User Approve Inlining		Read Only	No
2BA	Help:Document Web URL	URL for the web-based help topic to link to a VI from the Detailed help link in the Context Help window.	Read/Write	Yes
2BB	Help:Use Web URL	Indicates whether to link to a web-based help file from the Detailed help link in the Context Help window for a VI.	Read/Write	Yes
2BC	Execution:Shrink Large Buffers		Read/Write	Yes
2BD	Is Running Interactively		Read Only	Yes
2BE	Execution:Shrink Large Buffer Threshold		Read/Write	Yes
2BF	Execution highlighting?		Read/Write	No
2C1	Did Recompile InThis Version		Read Only	Yes
2C2	Saved Version		Read Only	Yes
2C3	Front Panel Window:Alignment Grid Size		Read/Write	No
2C4	Block Diagram Window:Alignment Grid Size		Read/Write	No
2C5	Connector Pane:Checksum v3		Read Only	Yes
2C6	Connector Pane:Checksum Ignore Dynamic Dispatch v2		Read Only	Yes

Example: Properties Exist - Generic Class

{{VIServerPropsTable|3}}

Show/Hide Generic Properties Table

Legend
R/W	Readable/Writable Permissions
RTE	Available in the Run-Time Engine
Basic Development Environment
VI Scripting
Private
Deprecated

Generic Properties Table

Property ID	Long Name (English)	Description	Read/Write	Run-Time Engine
6327800	Class ID	Class identifier of the object.	Read Only	Yes (Read Only)
6327801	Owner (Deprecated)		Read Only	Yes
6327802	Owning VI	Returns a reference to the VI that owns this object. Close this reference when you are finished using it. The reference this property returns does not keep the VI in memory. If the owning VI is removed from memory, this reference becomes invalid. Use the Open VI Reference function to obtain a reference to a VI that stays in memory until you explicitly close the reference.	Read Only	Yes (Read Only)
6327803	Class Name	Name of the VI Server class that contains the object.	Read Only	Yes (Read Only)
6327804	Modified		Read Only	Yes
6327805	Is On Block Diagram?	Returns TRUE when the object is located on the block diagram.	Read Only	Yes
6327806	Owner	Reference to the owning object. The type of the reference is Generic. An object of class Panel does not have an owner (it is the top-level object) and always returns Not A Refnum.	Read Only	Yes (Read Only)